Test Report No.
Installation and Operating Guide | Warranty Model Numbers | Z56DC1D/Z62DC1D | DLP PROJECTION © Copyright 2005, LG Electronics USA, Inc.
Warning/Caution Warning/Caution WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Introduction Introduction Controls - This is a simplified representation of a front panel. - Image shown may be somewhat different from your TV.
Introduction Connection Options Back Connection Panel ANTENNA COMPONENT IN 2 1 RGB IN AV IN 1 AV OUT Y VIDEO VIDEO PB RGB (PC/DTV) (L) MONO PR AUDIO (R) (L) AUDIO (R) DIGITAL AUDIO OPTICAL OUTPUT (L) AUDIO RGBDVI S-VIDEO (R) HDMI /DVI IN SERVICE ONLY ANTENNA IN AV IN 1 ANTENNA COMPONENT IN 2 1 RGB IN AV IN 1 AV OUT AV OUT Y VIDEO COMPONENT IN 1/2 VIDEO PB RGB (PC/DTV) (L) MONO PR AUDIO (R) (L) AUDIO (R) DIGITAL AUDIO OPTICAL OUTPUT (L) AUDIO RGBDVI S-VIDEO (R) HDMI /D
Introduction Front Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the front connection panel. To use the side jacks as the signal source, select them using Main Input menu as described on page 23.
Installation Installation External Equipment Connections Antenna or Cable Connection 1. Analog and Digital TV signals provided on one antenna - Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA Copper Wire RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
Installation Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV’s MONITOR OUTPUT. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. RGB INPUT PC/DTV (XGA/ 480p/ 720p/ 1080i) S-VIDEO MONITOR INPUT2 OUT INPUT1 RGB/DVI INPUT (L) AUDIO Note • Component, RGB-PC/RGB-DTV, HDMI1/DVI,HDMI2, DTV input sources cannot be used for Monitor out.
Installation Digital Audio Output ANTENNA Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. 3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer to page 26. See the external audio equipment instruction manual for operation.
Installation HDMI - HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolutions.
Installation Reference Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo to RCA type) (not supplied with the product) Owner’s Manual 17
How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET. 2. Turn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3. Select HDMI1/DVI Input source in Main Input option on the SETUP menu.(Refer to P.23) 4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI1/DVI Source Devices.
Operation Option Menu Options Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. - Horizon aspect ratio is not available for Component 1-2 (720p/1080i)/RGB-DTV (720p/1080i)/HDMI1/DVI-DTV(720p/1080i), HDMI2DTV(720p/1080i)/ CADTV, DTV(720p/1080i) input source.
Operation Option Menu Options Caption 1. Press the MENU button and then use D 2. Press the G button and then use 3. Press the G button and then use D D /E button to select the OPTION menu. / E button to select Caption. / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Caption/Text Caption/Text Analog Broadcasting System Captions - Select a caption mode for displaying captioning information if provided on a program.
Caption Option - Customize the DTV/CADTV captions that appear on your screen. button to select the OPTION 1. Press the MENU button and then use menu. D /E 2. Press the G button and then use D /E button to select Caption Option. 3. Press the G button and then use F /G button to select Custom. 4. Use D / E button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language.
Screen Setup for PC mode Operation • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. • In RGB-DTV mode, SIZE is not available. Adjustment for screen Position, Size, Phase, Reset •After connecting RGB-PC to PC input and checking the screen quality. - Display PC Adjust Menu using ADJUST button. - Position : Adjust the screen position. After displaying the Adjust, select the screen position. - Size : Adjust the screen size.
Troubleshooting Checklist • Check whether the TV is turned on. No picture & No sound • Is the power cord inserted into wall power outlet? • Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in. Picture OK & No sound • Press the VOLUME (G) button. • Sound muted? Press MUTE button. • Check to see if there is any object between the TV and the Remote Control causing obstruction.
Troubleshooting Checklist No output from one of the speakers • Adjust Balance in the AUDIO menu. (Refer to p.25) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in the unit turning off and does not indicate a fault with the TV. Poor TV input signal • Check ANTENNA and CABLE connection. Poor Video signal • Check ANTENNA and CABLE connection. No channel or a few channel Unsuitable Aspect Ratio • Start EZ Scan.
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.
Product Specifications MODEL Z62DC1D Z56DC1D Horizontal Size (inches) 39.9 47.5 Height (inches) 29.2 33.8 Depth (inches) 14.4 16.1 Weight (lbs.) 57.3 83.6 Power requirement AC120V ~ 60Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135.
Notes 46 DLP Projection TV
ZENITH ELECTRONICS CORPORATION DLP Projection TV Limited Warranty - USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
