Order Number : GETEC-C1-11-237 FCC Part 15 subpart B Test Report Number : GETEC-E3-11-121 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: SIGNAGE DISPLAY FCC ID.
ENG ENGLISH OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 42VS20 47VS20 55VS20 www.lg.
2 TABLE OF CONTENTS CONTENTS ENGLISH ENG 4 4 5 LICENSES OPEN SOURCE LICENSES ASSEMBLING AND PREPARING 21 ENTERTAINMENT 21 - Connecting to a wired network 22 - Network Status 23 - Connecting USB storage devices 24 - Browsing files 26 - Viewing movies 29 - Viewing photos 31 - Listening to music 33 - Viewing the Contents List 34 - DivX registration code 35 - Using PIP/PBP 5 Accessories 6 Optional Accessories 7 Parts and buttons 8 Connecting the stand 8 Connecting the Speaker
LICENSES TROUBLESHOOTING 56 SPECIFICATIONS 63 IR CODES 64 CONTROLLING THE MULTIPLE PRODUCT 64 Connecting the cable 64 RS-232C Configurations 64 Communication Parameter 65 Command reference list 67 Transmission / Receiving protocol ENGLISH 53 3
4 LICENSES LICENSES ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.
ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENG ENGLISH Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER ENERGY MONITOR INPUT OFF ON SAVING .
6 ASSEMBLING AND PREPARING Optional Accessories ENGLISH ENG Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit 74 74 74 Stand Stand Screws Screws Speaker kit Speaker Screws/Cable Cable holder/ Cable Tie NOTE Cable holder/Cable tie may not be available in some areas or for some models.
ASSEMBLING AND PREPARING 7 Parts and buttons ENG ENGLISH Screen Buttons Screen Marks USB DP IN DVI IN DVI OUT PC AUDIO IN LAN SPEAKER Connection panel (See p.49 to p.51) Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode.
8 ASSEMBLING AND PREPARING ENGLISH ENG Connecting the stand Connecting the Speakers - Only on some models. - Only on some models. 1 Place a soft cloth on the table and put the 1 Connect an input signal cable to use before product with the screen facing downward. installing the speakers. Use a cable tie to organize and fix the cables. 2 Mount the speaker by using a screw as shown in the following. Then connect the speaker cable.
ASSEMBLING AND PREPARING Portrait Layout Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. NOTE The Kensington security system is optional.
10 ASSEMBLING AND PREPARING Mounting on a wall CAUTION ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm Disconnect the power cord first, and then y move or install the Monitor set. Otherwise electric shock may occur.
11 REMOTE CONTROL REMOTE CONTROL CAUTION Do not mix old and new batteries, as this y may damage the remote control. Make sure to point the remote control to the y remote control sensor on the Monitor set. POWER ENERGY MONITOR INPUT OFF ON SAVING .,! GHI PQRS 1/a/A ABC JKL TUV -*# DEF MNO WXYZ CLEAR MARK ARC P PSM BRIGHT A NESS G E MUTE MENU AUTO BACK TILE S.
12 USING THE MONITOR SET ENGLISH ENG POWER ENERGY MONITOR INPUT OFF ON SAVING .,! GHI PQRS 1/a/A ABC JKL TUV -*# DEF MNO WXYZ CLEAR MARK ARC P PSM BRIGHT A NESS G E MUTE MENU AUTO BACK TILE S.MENU OK EXIT ID ON MENU (See p.36) Accesses the main menus or saves your input and exit menus. AUTO Automatically adjusts picture position and minimizes image instability.(RGB input only) Navigation buttons Scrolls through menus or options.
USING THE MONITOR SET 13 USING THE MONITOR SET RGB connection Your Monitor set supports the Plug & Play* feature. Transmits the analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the 15 pin signal cable as shown the following illustrations. Select RGB input. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. Back of the product.
14 USING THE MONITOR SET ENGLISH ENG DVI connection HDMI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI cable as shown the following illustrations. Select DVI input. Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. Select HDMI input. Back of the product. Back of the product.
USING THE MONITOR SET 15 DP connection Back of the product. DP (not included) 1$ NOTE Sound may not be available depending on y the DP version of your PC. ENG ENGLISH Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the DP cable as shown in the following illustrations. Select DP input.
16 USING THE MONITOR SET ENGLISH ENG Adjusting the screen Customizing image options Selecting an image mode Customize basic and advanced options of each image mode for the best screen performance. Display images in its optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK.
USING THE MONITOR SET Advanced Customizes the advanced options. Refer to the Advanced image options. Picture Reset Restores the options to the default setting. Adjusting the sound Selecting an sound mode Play the sound in its optimized settings by selecting one of the preset sound modes. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK.
18 USING THE MONITOR SET ENGLISH ENG Customizing sound options Using additional options Customize options of each sound mode for the best sound quality. Adjusting aspect ratio 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. AUDIO and press OK. 3 Press the Navigation buttons to scroll to Sound Mode and press OK.
USING THE MONITOR SET 19 - Zoom : The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. - Just Scan : Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
20 USING THE MONITOR SET Using the input list ENGLISH ENG Selecting an input source 1 Press INPUT to access the input source list. 2 Press the Navigation buttons to scroll to one of the input sources and press OK. Input source Description AV(CVBS) Watch video from a VCR or other external devices.
ENTERTAINMENT 21 ENTERTAINMENT (Depending on model) 1 Press MENU to access the main menus. Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments.
22 ENTERTAINMENT NOTE ENGLISH ENG y If you want to access the Internet directly on your display, the internet connection should always be on. y If you cannot access the Internet, check the network conditions from a PC on your network. y When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. y If you do not complete the network settings, the network may not work properly.
ENTERTAINMENT Connecting USB storage devices Tips for using USB storage devices y Only a USB storage device is recognizable. y If the USB storage device is connected through a USB hub, the device is not recognizable. y A USB storage device using an automatic recognition programme may not be recognized. y A USB storage device which uses its own driver may not be recognized. y The recognition speed of a USB storage device may depend on each device.
24 ENTERTAINMENT y Be sure to back up important files since data Browsing files ENGLISH ENG stored in a USB memory device may be damaged. We will not be responsible for any data loss. y If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. Access the photo, music, or movie lists and browse files. 1 Connect a USB storage device. 2 Press MENU to access the main menus.
ENTERTAINMENT 25 Supported file format Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
26 ENTERTAINMENT 5 Play a movie. Viewing movies ENGLISH ENG Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC. 1 Press the Navigation buttons to scroll to My NOTE y Non-supported files are displayed the preview image by icon only . y Abnormal files are displayed in the form of bitmap . Media and press OK. 2 Press the Navigation buttons to scroll to Movie List and press OK.
ENTERTAINMENT Tips for using playing video files When you are watching the movie by Movie y List function, you can adjust an image by Energy Saving key on the remote control. User setup for each image mode does not operate. Video options 1 Press MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Video Play., Set Video. or Set Audio. and press OK. NOTE y Option values changed in Movie List does not affect Photo List and Music List.
28 ENTERTAINMENT When you select the Set Video Play,, Repeat Turn on/off repeat function of ENGLISH ENG movie playback. When turned on, the 1 Press the Navigation buttons to scroll to show file within the folder will be played the Picture Size, Audio Language, Subtitle Language or Repeat. back repeatedly. Even when the repeated playback 2 Press the Navigation buttons to scroll to make is turned off, it can run the playback if appropriate adjustments.
ENTERTAINMENT When you select the Set Video,, appropriate adjustments. Page 1/1 Photo List USB1 USB Drive 001 002 010 Page 1/1 Drive1 011 003 004 005 006 012 013 014 015 When you select the Set Audio,, View Move Change Numbers To Music List 008 007 009 P Page Change Exit Mark Mode 1 Press the Navigation buttons to scroll to show Page 1/1 the Sound Mode, Clear Voice II or Balance.
30 ENTERTAINMENT Using photo options ENGLISH ENG ENERGY SAVING( Use the following options while viewing photos. Option Press the ENERGY SAVING button ) repeatedly to change the brightness of your screen. y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). y BGM: Selects a music folder for the background music. NOTE y You cannot change the music folder while the background music is playing. y You can only select the MP3 folder saved on the device that currently displays the photo.
ENTERTAINMENT When you select the Set Photo View, 31 Listening to music Slide Speed or BGM.. 2 Press the Navigation buttons to scroll to make appropriate adjustments. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Music List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK.
32 ENTERTAINMENT 6 Control playback by using the following buttons. ENGLISH ENG This unit cannot support the ID3 Tag y embedded MP3 files. Page 1/1 Music List 3 file(s) Marked 004. - B04.mp3 00:00 Drive1 005. - B05.mp3 00:00 Page 1/1 006. - B06.mp3 00:00 007. - B07.mp3 00:00 005. - B05.mp3 NOTE 008. - B08.
ENTERTAINMENT Music options Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager. 2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to ConNOTE y Option values changed in Movie List does not affect Photo List and Music List.
34 ENTERTAINMENT DivX registration code ENGLISH ENG Registering the DivX code Check and register the DivX registration code of your display so that you can rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same with your Display’s DivX registration code. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press OK. 3 Press the Blue button.
35 ENTERTAINMENT 5 Select the PIP or PBP icon from the play list. Using PIP/PBP ENG ENGLISH Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See p.45) 1 Press the MENU button to move to OPTION and press OK. 2 Press PIP/PBP to select PIP or PBP and then .&/6 press OK. &YJU )JEF 0QUJPO < Movie List > PIP/PBP Mode .PWF 1SF Off Position PIP Size PBP 3 Select Movie List or Photo List from My Media.
36 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing main menus ARC P PSM BRIGHT A NESS G E 1 Press MENU to access the main menus. MUTE MENU 2 Press the Navigation buttons to scroll to one of the following menus and AUTO S.MENU OK press OK. BACK TILE EXIT ID 3 Press the Navigation buttons to scroll to the setting or option you want ON OFF and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.
CUSTOMIZING SETTINGS PICTURE settings PICTURE 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
38 CUSTOMIZING SETTINGS Setting ENGLISH ENG SCREEN (In RGB Mode Only) Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. See “Customizing PC display options”. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress.
CUSTOMIZING SETTINGS 39 Advanced Control Dynamic Contrast (Off/High/ Medium/Low) Description Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (This function can be used only under AV(CVBS) and Component.) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer.
40 CUSTOMIZING SETTINGS AUDIO settings AUDIO ENGLISH ENG 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or Move OK O U option you want and press OK.
CUSTOMIZING SETTINGS TIME settings TIME 1 Press MENU to access the main menus. Move " 2 Press the Navigation buttons to scroll to TIME and press OK. OK " " $ % & + 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. Auto Off : On 4 Hours off : On - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
42 CUSTOMIZING SETTINGS OPTION settings OPTION Move ENGLISH ENG 1 Press MENU to access the main menus. OK ; = = $ % 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option ? @ " &$ [ \ [ + & ] you want and press OK. - To return to the previous level, press BACK.
CUSTOMIZING SETTINGS Setting PIP/PBP Description Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1 to 15 r = 1 to 15) - 15 x 15 available.
44 CUSTOMIZING SETTINGS Tile Mode ENGLISH ENG This monitor can be tiled with additional monitors to create a large tiled display.
CUSTOMIZING SETTINGS 45 PIP/PBP ENG ENGLISH Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See p.35) Size Mode *PIP(Picture In Picture): Displays the Sub screen in the main screen. *PBP(Picture By Picture): Displays the Sub screen next to the main screen. Adjusts the size of the sub screen (Size 0 to 10).
46 CUSTOMIZING SETTINGS Picture ID ENGLISH ENG Picture ID is used to change the settings of a ^ ! ! } { multi-vision. The set receiving the IR signal communicates with another set via an RS232 \ # ^ ~ }\ }{ you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
CUSTOMIZING SETTINGS NETWORK settings NETWORK Move press OK. @ % = q @ % @ @ \ $ = \ $ 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
48 MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH ENG Connect various external devices to the ports on the Monitor set’s back panel. 1 Find an external device you want to connect to your Monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.49 DVI - See p.49 AV(CVBS) - See p.50 Component - See p.50 DVD HDMI - See p.49 DVI - See p.49 AV(CVBS) - See p.
MAKING CONNECTIONS Connect a HD receiver, DVD, or VCR player to the Monitor set and select an appropriate input mode. HDMI connection Transmits the digital video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the HDMI cable as shown on the following illustration. Back of the product. DVI connection IN PC AUDIO IN Transmits the digital video signal from an external device to the Monitor set.
50 MAKING CONNECTIONS ENGLISH ENG Component connection AV(CVBS) connection Transmits the analog video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the 15 pin signal to RCA cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. Transmits the analog video and audio signals from an external device to the Monitor set.
MAKING CONNECTIONS Connecting to the LAN Connecting to a USB A Using a router(Switch) Switch Monitor Set PC B Using the Internet. LAN Monitor Set Network PC or ENG ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the Monitor set and access the USB menu to use various multimedia files.
52 MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box.
TROUBLESHOOTING 53 TROUBLESHOOTING Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Is the power indicator light on? y y y y Power is on, power indicator is blue but the screen appears extremely dark. The power indicator amber? Does the 'Out of range' message appear? Does the 'Check signal cable' message appear? See if the power switch is turned on. May need service. Adjust brightness and contrast again.
54 TROUBLESHOOTING 'Key Lock On' message appears. ENGLISH ENG Problem The 'Key Lock On' message appears when pressing the Menu button. Resolution y The Lock function prevents the OSD settings from being changed inadvertently. To release the lock, go to Menu and Option and disable the Key Lock option. The screen image looks abnormal.
TROUBLESHOOTING 55 The audio function does not work. Resolution Sound is too dull. y y y y Sound is too low. y Adjust the volume. No sound? See if the audio cable is connected properly. Adjust the volume. See if the sound is set properly. Select the appropriate equalize sound. Screen color is abnormal. Problem Resolution Screen has poor color resolution y Set the number of colors to more than 24 bits (true color) Select (16 colors).
56 SPECIFICATIONS SPECIFICATIONS ENGLISH ENG 42VS20 LCD Panel Screen Type 1067.31 mm Wide (42 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1067.31 mm Video Signal Pixel Pitch Max. Resolution 0.4845 mm (H) x 0.4845 mm (V) RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type.
SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight H W D 967 mm x 561 mm x 125 mm / 17.5 kg H W D 967 mm x 633 mm x 259 mm / 18.8 kg H W D 967 mm x 561 mm x 126.5 mm / 18.25 kg H W D 967 mm x 633 mm x 126.5 mm / 19.55 kg * Applicable only for models that support the speakers Audio 57 RMS Audio Output Input Sensitivity 10 W + 10 W (R + L) 0.
58 SPECIFICATIONS ENGLISH ENG 47VS20 LCD Panel Screen Type 1192.87 mm Wide (4 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.87 mm Video Signal Pixel Pitch Max. Resolution 0.5415 mm (H) x 0.5415 mm (V) RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type.
SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight H W D 1079.5 mm x 624.6 mm x 122.9 mm / 22.2 kg H W D 1079.5 mm x 697.7 mm x 298.3 mm / 23.6 kg H W D 1079.5 mm x 624.6 mm x 129.2 mm / 23.0 kg H W D 1079.5 mm x 697.7 mm x 298.3 mm / 24.4 kg * Applicable only for models that support the speakers Audio 59 RMS Audio Output Input Sensitivity 10 W + 10 W (R + L) 0.
60 SPECIFICATIONS ENGLISH ENG 55VS20 LCD Panel Screen Type 1387.80 mm Wide ( inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm Video Signal Pixel Pitch Max. Resolution 0.630 mm (H) x 0.630 mm (V) RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type.
SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight H W D 1251 mm x 722 mm x 104 mm / 34.5 kg H W D 1251 mm x 795 mm x 298 mm / 35.9 kg H W D 1251 mm x 722 mm x 104 mm / 35.2 kg H W D 1251 mm x 795 mm x 298 mm / 36.6 kg * Applicable only for models that support the speakers Audio 61 RMS Audio Output Input Sensitivity 10 W + 10 W (R + L) 0.
62 SPECIFICATIONS DTV Mode RGB (PC) supported mode ENGLISH ENG Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Component HDMI/DVI (DTV) 640 x 350 31.469 70.8 480i o x 720 x 400 31.468 70.8 576i o x 640 x 480 31.469 59.94 480p o o 640 x 480 37.5 75 576p o o 800 x 600 37.879 60.317 720p o o 800 x 600 46.875 75 1080i o o 832 x 624 49.725 74.55 1080p o o 1024 x 768 48.363 60 1024 x 768 60.123 75.029 1280 x 720 44.772 59.
IR CODES 63 IR CODES Code (Hexa) 95 08 Function Energy Saving ( ) POWER Note R/C BUTTON R/C BUTTON (ON/OFF) 0B INPUT R/C BUTTON C4 Monitor On R/C BUTTON C5 Monitor Off R/C BUTTON 43 MENU R/C BUTTON 40 Up ( ) R/C BUTTON 41 Down ( ) R/C BUTTON 07 Left ( ) R/C BUTTON 06 Right ( ) R/C BUTTON 44 OK( ) R/C BUTTON 28 BACK( 5B EXIT R/C BUTTON 4D PSM R/C BUTTON 02 Volume R/C BUTTON 03 Volume R/C BUTTON 09 MUTE R/C BUTTON E0 Bright (Page UP) R/C BUTTON E1 Brigh
64 CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG Use this method to connect several products to a single PC. You can control several products at a y time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 99 without being duplicated. y Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
CONTROLLING THE MULTIPLE PRODUCT 65 Command reference list DATA (Hexadecimal) 1 2 01. Power k a 02. Input Select x b Refer to ‘02. Input Select’ 03. Aspect Ratio k c Refer to ‘03. Aspect Ratio’ 04. Energy Saving j q Refer to ‘04. Energy Saving’ 00H to 01H 05. Picture mode d x 00H to 04H 06. Contrast k g 00H to 64H 07. Brightness k h 00H to 64H 08. Sharpness k k 00H to 64H 09. Color k i 00H to 64H 10. Tint k j 00H to 64H 11.
66 CONTROLLING THE MULTIPLE PRODUCT COMMAND ENGLISH ENG DATA (Hexadecimal) 1 2 41. Tile H Position d e 00H to 64H 42. Tile V Position d f 23H to 41H 43. Tile H Size d g 00H to 32H 44. Tile V Size d h 00H to 32H 45. Natural Mode (In Tile mode) d j 00H to 01H 46. Fail Over Select m l 00H to 01H 47. DPM Select f j 00H to 01H 48. Remote Lock/ key Lock k m 00H to 01H 49. Key m c Refer to ‘49. Key’ 50. OSD Select k l 00H to 01H 51. Elapsed time return d l FFH 52.
CONTROLLING THE MULTIPLE PRODUCT 67 Transmission / Receiving protocol [Command1][Command2][ ][Set ID][ ][Data][Cr] or [Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Set ID with which you want to communicate. Etner [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set.
68 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) To control power On/Off the display. ENGLISH ENG Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On FF : Check status Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this modes, display will send the acknowledgement after power on processing completion.
CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) To adjust screen brightness. Data 00 to 64: Brightness 0 to 100 Transmission [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Tint 0 to 100(R50 to G50) Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) To adjust screen sharpness. * Only available for AV/Component input. Transmission [k][k][ ][Set ID][ ][Data][Cr] Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 11.
70 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 13. V Position (Command: f r) To set the Vertical position. * Only available for Tile Off mode. Transmission [f][r][ ][Set ID][ ][Data][Cr] 16. Balance (Command: k t) To adjust balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to Right 50 Data 23 to 41: Bottom Max(-15) to Top Max(15) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 14. H Size (Command: f s) To set the Horizontal size. * Only available for Tile Off mode.
CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) To adjust bass. Data 00 to 64: Bass 0 to 100 22. Volume Control (Command: k f) To adjust volume. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 20. Speaker (Command: d v) To select speaker on/off.
72 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 25. Off Timer(Repeat Mode/ Time) (Command: f e) To set the Off Timer(Repeat mode/ Time) function. Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 00: Repeat Off 01: Repeat Once 02. Repeat Daily 03: Repeat from Monday to Friday 04: Repeat from Monday to Saturday 05: Repeat from Saturday to Sunday 06.
CONTROLLING THE MULTIPLE PRODUCT Transmission [f][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: 0 to 100sec. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 31. 4 Hours Off (Command: m n) To set the 4 Hours Off function. Transmission [m][n][ ][Set ID][ ][Data][Cr] 33. Language (Command: f i) To set language for OSD.
74 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 35. Power Indicator(Power Light) (Command: f p) To set the Power Indicator(Power Light) function. Transmission [f][p][ ][Set ID][ ][Data][Cr] Data 00: Power Light Off 01: Power Light On Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 38. Tile Mode (Command: d d) To select a Tile Mode Off/ On and Tile Row/ Column size.
CONTROLLING THE MULTIPLE PRODUCT Transmission [d][e][ ][Set ID][ ][Data][Cr] Data 00 to 32: Left (-50) to Right (0) (*Left/Right values depend on Tile H size.) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 44. Tile V Size (Command: d h) To set the Tile Vertical size. *Set Tile V Position to 0x00 before setting Tile V Size. *Only available when Tile Natural Mode is off. Transmission [d][h][ ][Set ID][ ][Data][x] Data 00 to 32: 0 to 50 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 42.
76 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 47. DPM Select (Command: f j) To set the DPM (Display Power Management) function. Transmission [f][j][ ][Set ID][ ][Data][x] Data 00: DPM Select Off 01: DPM Select On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 50. OSD Select (Command: k l) To select OSD(On Screen Display) on/off Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD Off 01: OSD On Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 48.
CONTROLLING THE MULTIPLE PRODUCT Transmission [f][z][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] ENG ENGLISH 53. S/W Version (Command: f z) To read the software version.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL E N E RGY STA R i s a s et o f p owe rsaving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.
