Order Number : GETEC-C1-12-027 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-010 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: MONITOR SIGNAGE FCC ID.
ENG ENGLISH OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 47WV30BR www.lg.
2 TABLE OF CONTENTS CONTENTS ENGLISH ENG 4 LICENSE 5 ASSEMBLING AND PREPARING 22 - HDMI connection 23 - Audio connection 23 - IR Receiver connection 24 Adjusting the screen 24 - Selecting an image mode 24 - Customizing image options 25 - Customizing PC display options 25 Adjusting the sound 25 - Selecting an sound mode 26 - Customizing sound options 26 Using additional options 26 - Adjusting aspect ratio STORAGE METHOD FOR PANEL 28 ENTERTAINMENT PROTECTION 28 - Connecting
TABLE OF CONTENTS - DVI - HDMI connection 55 - Component connection 55 - AV connection 56 Connecting to the LAN 56 - LAN connection 56 Connecting to a USB 57 Daisy Chain Monitors 57 - RGB Cable 57 - DVI Cable 58 TROUBLESHOOTING 61 SPECIFICATIONS 63 RS-232 CONTROL NOTE The following three phenomena may occur due to the characteristics of the Super Narrow Bezel y LCD. They are not related to the display's performance. 1. The edges of the screen may become darker or shadows may appear.
4 LICENSE LICENSE ENGLISH ENG A different license is supported depending on the model. Visit www.lg.com for more information on the license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENG ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord RGB Cable DVI Cable CD (Owner's Manual) / Card POWER ENERGY MONITOR INPUT OFF ON SAVING .
6 ASSEMBLING AND PREPARING Parts ENGLISH ENG RS-232C (CONTROL) DVI OUT DVI IN /DVI USB RGB OUT AUDIO (RGB/DVI) LAN COMPONENT IN SPEAKER (8Ω) RGB IN REMOTE CONTROL IN VIDEO AV IN AUIDO Connection panel (See p.54 to p.
ASSEMBLING AND PREPARING 7 To install in a Portrait Layout Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE Keep the removed L-brackets and use them when moving the monitor later. ENG ENGLISH When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
8 ASSEMBLING AND PREPARING Moving Handles ENGLISH ENG Moving the device in a vertical position Moving the device in a horizontal position Hold the vertical handles on the left and right sides or the left and right handles on the back of the display. Have the screen facing down and hold the vertical handles on the left and right sides.
ASSEMBLING AND PREPARING 9 STORAGE METHOD FOR PANEL PROTECTION ENG ENGLISH Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. Panel If the product is tilted onto the bezel, the bottom of the panel may be damaged. Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
10 ASSEMBLING AND PREPARING Installing on a wall CAUTION ENGLISH ENG Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.
ASSEMBLING AND PREPARING 11 EXTERNAL EQUIPMENT SETUP ENG ENGLISH IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232 cable. Refer to page 19 for more information.
12 ASSEMBLING AND PREPARING Tiling Displays ENGLISH ENG How to Join Sets - Installing Set 1 *Example of 2 x 2 tiling * The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the remote control. Set the guide bracket into the bracket groove using screws and mount the set to the wall mount plate or the wall.
ASSEMBLING AND PREPARING 13 How to Join Sets - Installing Set 2 Guide bracket Remove the guide brackets How to remove the guide brackets * Unscrew the guide bracket screws from the rear of the set and remove the guide brackets. * Once the screws are removed, the guide brackets will drop. You need to remove them through the gap on the sides of the set.
14 ASSEMBLING AND PREPARING How to Join Sets - Installing Set 3 ENGLISH ENG Fix the guide brackets to Set 3 following the steps above, and loosely mount the set to the wall mount plate or the wall. &5 &4 &6 Minimize the space between the sides of the sets using the U-shaped fixture. mount plate or the wall.
ASSEMBLING AND PREPARING 15 How to Join Sets - Installing Set 4 Set 4 joined to the rest of the sets (2 x 2 tiling) Wall mount plate or wall Display set NOTE y The guide brackets for tiling should only be used to join sets and should be removed once they are joined. y The guide brackets should only be used as the assisting tool when tiling sets. The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount (800 x 400).
16 ASSEMBLING AND PREPARING Inserting the Cable Holder ENGLISH ENG As illustrated, insert two cable holders into the holes at the bottom rear of the set to organize the cable bundles. As illustrated, screw the power cable holder into the hole on the bottom rear of the set to hold the power cables together. (This is to put the power cables inside the holder.
17 REMOTE CONTROL REMOTE CONTROL ENG ENGLISH The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. POWER ENERGY MONITOR INPUT OFF ON SAVING To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. .
18 REMOTE CONTROL POWER ENERGY MONITOR INPUT OFF ON SAVING ENGLISH ENG .,! GHI PQRS 1/a/A ABC JKL TUV -*# DEF MNO WXYZ CLEAR MARK ARC P PSM BRIGHT A NESS G E MUTE MENU AUTO S.MENU OK BACK TILE EXIT ID ON MENU(See p.43) Selects a menu. Clears all on-screen displays and returns to Set viewing from any menu. Up/Down/Left/Right Allows you to navigate the on-screen menus and adjust the system settings to your preference.
REMOTE CONTROL 19 Displaying the device name connected to an input port 1 Access the Input list screen and press the blue (input label) button on the remote control. BACK TILE EXIT ID OFF ON 2 You can assign an input label for every input except USB. Input Label AV Component RGB HDMI DVI-D Close NOTE External inputs supported: AV, Component, y RGB, HDMI, DVI-D.
20 REMOTE CONTROL Picture ID ENGLISH ENG Picture ID is used to change the settings of a $% & multi-vision. The set receiving the IR signal communicates with another set via an RS232 + = $?+ $ you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
USING THE MONITOR SET 21 USING THE MONITOR SET NOTE It is recommended to you use an HDMI y connection for the best image quality. RGB connection Transmits an analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the following illustrations. Select RGB input source on the monitor. Back of the Monitor Set RGB OUT CAUTION RGB IN Connect the signal y input cable and tighten it by turning the screws clockwise.
22 USING THE MONITOR SET ENGLISH ENG DVI connection HDMI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI cable as shown the following illustrations. Select DVI-D input source on the monitor. Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. Select HDMI input source on the monitor.
USING THE MONITOR SET IR Receiver connection Transmits the audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the Audio cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the Monitor set with an Audio connection. Allows the use of a wired remote or IR receiver extension.
24 USING THE MONITOR SET ENGLISH ENG Adjusting the screen Customizing image options Selecting an image mode Customize basic and advanced options of each image mode for the best screen performance. Display images using optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK.
USING THE MONITOR SET Customizes the advanced options. Control See more information about advanced options See p.46. Picture Restores the options to the default Reset setting. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. Adjusting the sound Selecting an sound mode Play the sound in its optimized settings by selecting one of the preset sound modes. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK.
26 USING THE MONITOR SET ENGLISH ENG Customizing sound options Using additional options Customize options of each sound mode for the best sound quality. Adjusting aspect ratio 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. AUDIO and press OK. 3 Press the Navigation buttons to scroll to Sound Mode and press OK.
USING THE MONITOR SET 27 - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
28 ENTERTAINMENT ENTERTAINMENT ENGLISH ENG Connecting to a wired network (Depending on model) To set up the network seetings: (Even if your display has already connected automatically, running setup again will not harm anything), 1 Press MENU to access the main menus. Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection.
ENTERTAINMENT NOTE y A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.
30 ENTERTAINMENT ENGLISH ENG Connecting USB storage devices Connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features (See "Browsing files" on page 31). Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My media screen appears.
31 ENTERTAINMENT Browsing files Access the photo, music, or movie lists and browse files. 1 Connect a USB storage device. 2 Press MENU to access the main menus. 3 Press the Navigation buttons to scroll to My Media and press OK. 4 Press Navigation buttons to scroll to PHOTO LIST, MUSIC LIST, or MOVIE LIST and press OK.
32 ENTERTAINMENT Supported file format ENGLISH ENG Type Movie Music Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV, TS,TRP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*. vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*. wmv/*.flv/*.avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
ENTERTAINMENT 33 5 Play a movie. Viewing movies 1 Press the Navigation buttons to scroll to My Media and press OK. NOTE y Non-supported files are displayed the preview image by icon only . y Abnormal files are displayed in the form of bitmap . 2 Press the Navigation buttons to scroll to Movie List and press OK. 3 Press the Navigation buttons to scroll to a 6 Control playback by using the following buttons. folder you want and press OK.
34 ENTERTAINMENT Tips for using playing video files ENGLISH ENG y Some user-created subtitles may not work properly. y Some special characters are not supported in subtitles. y HTML tags are not supported in subtitles. y Subtitles in languages other than the supported languages are not available. y The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
MAINTENANCE When you select the Set Video Play,, Repeat 35 Turn on/off repeat function of file within the folder will be played the Picture Size, Audio Language, Subtitle Language or Repeat. back repeatedly. Even when the repeated playback 2 Press the Navigation buttons to scroll to make is turned off, it can run the playback if appropriate adjustments. the file name is similar to the previous file. Menu Picture Size Description Selects your desired picture Audio format during movie play.
36 MAINTENANCE When you select the Set Video,, ENGLISH ENG 1 Press the Navigation buttons to scroll to make appropriate adjustments. Page 1/1 Photo List USB External 001 002 010 Page 1/1 Drive1 011 003 004 005 006 012 013 014 015 When you select the Set Audio,, Move Change Numbers To Music List 007 View 008 009 PAGE Page Change Exit Mark Mode 1 Press the Navigation buttons to scroll to show Page 1/1 the Sound Mode, Clear Voice II or Balance.
MAINTENANCE Using photo options 37 Press the ENERGY SAVING button repeatedly to change the brightness of your screen. Option y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). Use the following options while viewing photos. 01_a.jpg 2008/12/10 1920 x 1080 479 KB y TransitionEffect: Set the view mode of the slideshow. y BGM: Selects a music folder for the background music. ^ ^ NOTE ^ Slideshow \ BGM Options ` y You cannot change the music folder while the background music is play
38 MAINTENANCE When you select the Set Photo View, ENGLISH ENG 1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. 2 Press the Navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide.
MAINTENANCE When you select the Set Video, 39 Listening to music appropriate adjustments. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Music When you select the Set Audio, 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance. 2 Press the Navigation buttons to scroll to make appropriate adjustments. List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK.
40 MAINTENANCE 6 Control playback by using the following buttons. ENGLISH ENG This unit cannot support the ID3 Tag y embedded MP3 files. Page 1/1 Music List ! Drive1 Page 1/1 \ 004. - B04.mp3 00:00 005. - B05.mp3 00:00 ` \ 006. - B06.mp3 00:00 007. - B07.mp3 00:00 NOTE 008. - B08.mp3 00:00 ^\ 005. - B05.mp3 02:30 / 03:25 \ II ^^ Button \\ MENU Play with Photo Option Stops playback s Plays a music file t Pauses or resumes playback w Skips to the next file v o
MAINTENANCE 41 Music options 2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK. NOTE y Option values changed in Movie List does not affect Photo List and Music List. y Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. When you select the Set Audio Play., 1 Press the Navigation buttons to scroll to select the Repeat or Random.
42 MAINTENANCE DivX® VOD Guide ENGLISH ENG DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus.
CUSTOMIZING SETTINGS 43 CUSTOMIZING SETTINGS ENG ENGLISH Accessing main menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.44) Adjusts the image size, quality, or effect PICTURE OPTION AUDIO (See p.
44 CUSTOMIZING SETTINGS PICTURE settings PICTURE Move ENGLISH ENG % 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS Setting Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. See "Specification" See p.61 for the recommended resolution for each model. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress.
46 CUSTOMIZING SETTINGS Advanced image options ENGLISH ENG Setting Description Dynamic Contrast (Off/Low/Medium/ High) Optimizes the contrast automatically according to the brightness of the reflection. (This function can be used only under Component.) Dynamic Color (Off/Low/High) Adjusts the Color of the reflection automatically to reproduce natural colurs as close as possible.(This function can be used only under Component.
CUSTOMIZING SETTINGS AUDIO settings AUDIO 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or Move OK O U option you want and press OK. " $ % $ - To return to the previous level, press BACK.
48 CUSTOMIZING SETTINGS TIME settings TIME ENGLISH ENG 1 Press MENU to access the main menus. Move + 2 Press the Navigation buttons to scroll to TIME and press OK. + % + 3 Press the Navigation buttons to scroll to the setting or option ; = ? $ you want and press OK. OK & $ + ? - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS OPTION settings OPTION Move OK. [ \ + ; ] ^ ] ? 3 Press the Navigation buttons to scroll to the setting or _ option you want and press OK. ; - To return to the previous level, press BACK. ] ; ` ^ q 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
50 CUSTOMIZING SETTINGS Setting Portrait mode Description Setting Tile Mode You can display the image on multiple sets and view it in a larger size. To use the Tile Mode on multiple sets with same signal. Auto Config. This option optimizes the screen when you connect the set to a new computer or change to a different mode. If you are not satisfied with the adjustment, you can manually change the "Position" or "Size". Position You can set the position. Size You can set the size.
CUSTOMIZING SETTINGS 51 Tile Mode Off When the Tile Mode option is disabled 2X1 When using 2 monitors ID 1 3X3 When using 9 monitors 2X2 When using 4 monitors ID 2 ENG ENGLISH This monitor can be tiled with additional monitors to create a large tiled display.
52 CUSTOMIZING SETTINGS NETWORK settings NETWORK Move ENGLISH ENG 1 Press MENU to access the main menus. \ = & " 2 Press the Navigation buttons to scroll to NETWORK and press OK. \ = & \ \ ^ ; " ^ ; 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
MAKING CONNECTIONS 53 MAKING CONNECTIONS 1 Find an external device you want to connect to your Monitor set shown in the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI - (See p.54) Component - (See p.55) AV - (See p.55) DVD HDMI - (See p.54) Component - (See p.55) AV - (See p.55) Speaker USB Memory storage - (See p.56) Memory card reader - (See p.56) PC HDMI - (See p.
54 MAKING CONNECTIONS ENGLISH ENG Connecting to a HD receiver, DVD or VCR player Connect a HD receiver, DVD, or VCR player to the Monitor set and select an appropriate input mode. HDMI connection DVI - HDMI connection Transmits the digital video signal from an external device to the Monitor set. Connect the external device and the Monitor set with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable.
MAKING CONNECTIONS 55 AV connection Transmits the analog video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with a component cable as shown on the following illustration. To transmit an audio signal, connect an optional audio cable. Transmits the analog video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the RCA cable as shown on the following illustration.
56 MAKING CONNECTIONS Connecting to the LAN ENGLISH ENG Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the Monitor set and access the USB menu to use various multimedia files. "Connecting USB storage devices" on See p.30 and “Browsing files” on See p.31 LAN connection Connect the LAN cable. A Using a router(Switching Hub) LAN Connecting to a USB Switching Hub or Product B Using the Internet.
MAKING CONNECTIONS 57 Daisy Chain Monitors RGB Cable 15-pin D-Sub Signal Cable (Max 3m) Set 1 Set 2 Set 3 Set 4 DVI Cable DVI Cable (Max 3m) DVI-OUT DVI-IN Set 1 DVI-OUT Set 2 DVI-IN DVI-OUT DVI-IN Set 3 NOTE Since the image quality may decrease when multiple monitors are connected, an amplifier may be y required in certain instances. When multi-connecting in/out cascade format, no loss cables are recommended.
58 TROUBLESHOOTING TROUBLESHOOTING ENGLISH ENG No image is displayed Problem Is the product power cord connected? Power is on, power indicator is blue but the screen appears extremely dark. Does the 'Invalid Format' message appear? Does the 'No Signal' message appear? Resolution y See if the power cord is properly connected to the outlet. y Adjust brightness and contrast again. y Backlight may need repair.
TROUBLESHOOTING 59 The screen image looks abnormal. Resolution y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu.
60 TROUBLESHOOTING Screen color is abnormal. ENGLISH ENG Problem Resolution Screen has poor color resolution y Set the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or mono-colored. y Check the connection status of the signal cable. Or, re-insert the PC video card.
SPECIFICATIONS 61 SPECIFICATIONS Video Signal Screen Type 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.8 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Max.
62 SPECIFICATIONS PC supported mode ENGLISH ENG Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution *1 720 x 400 31.468 70.8 *2 640 x 480 31.469 59.94 *3 800 x 600 37.879 60.317 4 832 x 624 49.725 74.55 *5 1024 x 768 48.363 60 *6 1280 x 720 44.772 59.855 *7 1366 x 768 47.71 59.79 *8 1280 x 1024 63.981 60.02 *9 1360 X 768 47.72 59.799 *10 1920 X 1080 67.
RS-232 CONTROL 63 RS-232 CONTROL Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the y product on/off, select an input source or adjust the OSD menu from your PC. This monitor features two RS-232 ports. One input and one output. This allows you to daisy-chain monitors without having to use a splitter box. RS-232C Cable PC Set 1 NOTE Set 3 Set 4 Use RS-232C cables as shown in the picture.
64 RS-232 CONTROL Command Reference List ENGLISH ENG COMMAND DATA (Hexadecimal) 1 2 k a 00H to 01H 01 Power 02 Input Select x b Refer to ‘02. Input Select’ 03 Aspect Ratio k c Refer to ‘03. Aspect Ratio’ 04 Energy Saving j q Refer to ‘04.
RS-232 CONTROL COMMAND 2 DATA (Hexadecimal) 41 Tile H Position d e 42 Tile V Position d f 00H to 64H 23H to 41H 43 Tile H Size d g 00H to 64H 44 Natural Mode (In Tile mode) d j 00H to 01H 45 FAN Control d o 00H to 02H 46 FAN Fault check d w FFH 47 Temperature Value d n FFH 48 Key m c Refer to ‘48. Key’ 49 OSD Select k l 00H to 01H 50 Elapsed time return d l FFH 51 Serial No.
66 RS-232 CONTROL 01. Power (Command : k a) To control Power On / Off of the display. ENGLISH ENG Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this modes, display will send the acknowledgement after power on processing completion.
RS-232 CONTROL 07. Brightness (Command: k h) To adjust screen brightness. Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Tint 0 to 100(R50 to G50) Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) To adjust screen sharpness. * Only available for AV/Component input.
68 RS-232 CONTROL ENGLISH ENG 13. V Position (Command: f r) To set the Vertical position. * Only available for Tile Off mode. Transmission [f][r][ ][Set ID][ ][Data][Cr] Data 23 to 41: Bottom Max(-15) to Top Max(15) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 16. Balance (Command: k t) To adjust balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to Right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 17. Sound Mode (Command: d y) To select the sound mode.
RS-232 CONTROL 19. Bass (Command: k s) To adjust bass. Data 00 to 64: Bass 0 to 100 Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 20. Speaker (Command: d v) To select speaker on/off. Transmission [d][v][ ][Set ID][ ][Data][Cr] Data 00: Speaker Off 01: Speaker On Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x 22. Volume Control (Command: k f) To adjust volume. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 23.
70 RS-232 CONTROL 25. Off Timer(Repeat Mode/ Time) (Command: f e) To set the Off Timer(Repeat mode/ Time) function. ENGLISH ENG Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 00: Repeat Off 01: Repeat Once 02. Repeat Daily 03: Repeat from Monday to Friday 04: Repeat from Monday to Saturday 05: Repeat from Saturday to Sunday 06.
RS-232 CONTROL 30. Automatic Standby (Command: m n) To set the Automatic Standby function. Data 00: Off 01: 4 Hours Off Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 33. ISM mode (Command: j p) To select ISM method for avoiding having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 01: Orbiter 02: Inversion 04: White Wash 08. Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 31. Auto Off (Command: f g) To set the Auto Off function.
72 RS-232 CONTROL ENGLISH ENG 36. Fail Over Input Select (Command: m j) To select fail over mode. * Only available in Fail Over manual mode. Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 60: RGB 70: DVI-D 90: HDMI* *Use 0x90 as data for HDMI input, regardless HDMIDTV or HDMI-PC Acknowledgement [j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 39. Tile Mode Check (Command: d z) To check Tile Mode status.
RS-232 CONTROL Transmission [d][f][ ][Set ID][ ][Data][Cr] Data 23 to 41: Bottom Max to Top Max Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 45. FAN Control (Comman : d o) To set Fan control on/off. Transmission [d][o][ ][Set ID][ ][Data][Cr] Data 00: Auto 01: On 02: Manual Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] 46. FAN Fault Check (Command: d w) To set Fan control on/off. 43. Tile H Size (Command: d g) To set the Tile Horizontal Size.
74 RS-232 CONTROL 48. Key (Command: m c) To send IR remote control code. ENGLISH ENG Transmission [m][c][ ][Set ID][ ][Data][Cr] Data IR_KEY_CODE Acknowledgement [c][ ][Set ID][ ][OK][Data][x] 51. Serial No.Check (Command: f y) To read the serial numbers. Transmission [f][y][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] When display is in the standby mode, display will turn on by Power button of remote control only. 52.
IR CODES IR CODE (Hex) Function 75 Remark POWER Remocon Botton C4 MONITOR ON Remocon Botton C5 MONITOR OFF Remocon Botton 95 Evergy Saving Remocon Botton 0B INPUT Remocon Botton 10 Number 0 Remocon Botton 11 Number 1 Remocon Botton 12 Number 2 Remocon Botton 13 Number 3 Remocon Botton 14 Number 4 Remocon Botton 15 Number 5 Remocon Botton 16 Number 6 Remocon Botton 17 Number 7 Remocon Botton 18 Number 8 Remocon Botton 19 Number 9 Remocon Botton 02 VOL+ Remoc
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL E N E RGY STA R i s a s et o f p owe rsaving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.