LG- 4600 User Guide Ver. 0.1 2003.08.
Unlocking Your Phone .......................................................................4 View of Phone ...................................................................................4 Installing and Removing the Battery...................................................5 Turning Your Phone On and Off.........................................................5 Main Menu........................................................................................6 Power Save Mode... . . . . . . . . . . . . .
Tone Length .................................................................................... 18 Display Menu........................................................................................................................................ 19 Security ........................................................................................... 19 Locking Your Phone......................................................................... 19 Unlocking Your Phone .......................................
Unlocking Your Phone If you received your Telus Mobility LG-4600 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 secs. 22.. press Unlock menu 33.. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Telus Mobility Phone Number or 0000. View of Phone 1.
Folder Headset Jack Talk Mouse Volume Control END/PWR CLR Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone. Turning Your Phone On and Off To turn your phone on, press and hold PWR button 2-3 seconds. Your phone performs a short self-test before letting you know it is operational.
To turn your phone off, press and hold the PWR key 2-3 seconds. Main Menu Incoming Log When your phone acquires Telus Mobility Service, the Greeting (a banner of text), the current time and date and the Main Menu are displayed. If you are in a Telus Mobility or authorized analog cellular provider’s service area, you are ready to send and receive calls. Menu Navigation The Mouse Key lets you scroll circularly through menus quickly and easily.
Entering Characters Using the Keypad(Multi-tab) To enter a letter, punctuation or number when creating Phone Book or Scheduler entries, press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase. Characters in the following order: 1 1 .
Display Icons Display icons are the symbols your phone uses to communicate important information.
!!! WARNING – CHOKING HAZARD – ANTENNA MAY BECOME DISLODGED Attempting to remove or repeated twisting of the antenna will loosened the materials securing it into antenna. Once the antenna is loosened or removed, only an authorized Telus Mobility Representative can restore the antenna’s original integrity. Do not attempt to remove or twist the antenna. Signal Strength The quality of each call you make or receive depends on the signal strength on your area.
The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery icon stops flashing. Using Your Phone Placing a Call When the phone is turned on, check the Signal Strength icon to see of you are in a Telus Mobility Service Area or authorized PCS CDMA or AMPS provider’s s ervice area. 1. Open the Flip. 2. Enter the phone number and press TALK button. 3. When you are finished with your call, press END button.
When you use your phone on other than Telus Mobility networks, your calling experience and call quality will be quite similar to what you experience when making calls within the Telus Mobility Network. Although certain calling features may not be available, your phone calls are still private and secure. If you need customer service for any reason while using your phone outside the Telus Mobility Nationwide Network, just dial 611 from your Telus Mobility Phone.
During a call, your phone displays menu options. To select an option, press Options menu. ?? 3 Way call – Lets you dial another phone number. ?? Search – Let’s you search an entry from Phonebook. ?? Record – Start recording the conversation. ?? Write memo – Start the Notepad for you to write memo on it. ?? Menu – Let’s you access Main Menu.
Displaying Your Telus Mobility Phone Number To display your phone number: 1. From the Main Menu, highlight Phone Info and press [OK]. Setting the Ring Volume to Vibrate To set the phone to Vibrate Mode, press the down Volume Control key until Vibrate is displayed. Vibrate On- is displayed on idle screen. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” .
To retrieve text messages: 1. From the Main Menu, highlight Messaging and press [OK]. ☞ Tip! You can also access Messaging from the Main Menu by pressing the Mouse Key Right. 2. Highlight Text Messaging and press [OK]. 3. Highlight the message you want to display and press [OK]. Press the Mouse Key down to display additional text. ☞ Tip! You can view the next or previous message by pressing the Mouse Key left (previous) or right (next) 4. Press [OK] to display message options.
Extracting Phone Numbers From Text Messages To extract a phone number from a text message: 1. While displaying a text message, press Options menu to view the Text Message options. 2. Highlight Extract Number and press [OK]. All the phone numbers contained in the message are displayed. Note: If there are no phone numbers to extract from the message, nothing is displayed. 3.
1. From the Main Menu, highlight Messaging and press [OK]. 2. Highlight Text Messaging and press [OK] 3. Highlight Erase and press [OK] 4. Highlight All and press [OK]. 5. Highlight yes and press [OK]. Sounds Adjusting the Volume 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Volume and press [OK]. 4. Highlight Ringer, Ear Piece, Key Beep, Power On/Off or Game and press [OK]. 5.
1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Ringers and press [OK]. 4. Highlight Voice Calls and press [OK]. 5. Highlight Caller ID, No Caller ID or Roaming and press [OK]. Note: If you select Roaming, the Ring Type is used for all incoming roaming calls. 6. Scroll the list and highlight a ringer type. You will hear a preview of the ringer type when you highlight it.
Tone Length Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems. To select a tone length: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Key Tones and press [OK]. 4. Highlight Short Tones or Long Tones and press [OK]. Alert Notification To enable of disable alert sounds: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3.
Display For information on changing Backlight, Greeting or Contrast settings, see Handy Tips . Security Accessing the Security Menu You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Telus Mobility Phone Number or 0000. Security Menu To access the Security menu: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Security and press [OK] 3. Enter your lock code.
4. Highlight Lock and press [OK]. Unlocking Your Phone 1. Highlight Unlock and press [OK]. 2. Enter your lock code. Changing the Lock Code To change your lock code: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Security menu and press [OK]. 3. Highlight Change Lock and press [OK]. 4. Enter your new lock code. 5. Reenter your new lock code.
2. Highlight Setup and press [OK]. 3. Highlight Call Answer and press [OK] 4. Select Open/Any Key from the selection list and press [OK] To answer calls automatically 1. From the Main Menu, highlight Settings and press [OK] 2. Highlight Setup and press [OK]. 3. Highlight Auto- Answer and press [OK] 4.
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.