User's Manual Part 4

ManualsBrandsLG Electronics USA ManualsElectronicsSTAREX-IS 1900 Indoor BTS

STAREX-IS BSM Manual

Page:449(877)

Issue:1.

SMD-011-PMA210

Fig. 4.5-27 Traffic Path Release Command Execution Result Display(Interm Window)

Fig. 4.5-28 Traffic Path Release Command Execution Result Display(Console Window)

Summary of content (31 pages)

PAGE 1
STAREX-IS BSM Manual Fig. 4.5-27 Traffic Path Release Command Execution Result Display(Interm Window) Fig. 4.5-28 Traffic Path Release Command Execution Result Display(Console Window) SMD-011-PMA210 Page:449(877) Issue:1.
PAGE 2
STAREX-IS BSM Manual 4.5.7. Call Trace Testing Function Mobile Call Trace Function traces the process of call setup for the MS, surveillance of the status after the call setup, the process of call release, and displays the content visibly to BSM after BSM of User’s terminal designates a Mobile Station(MS) at random by using a value of MSIN(Mobile Station Identification Number). .
PAGE 3
STAREX-IS BSM Manual Present RTD Value and calculated distance by using this Tracing Information at the phase of Call Release: Tracing it every time at the normal release or abnormal release Reason for Call Release Reason for Call Release and its content: Display reason value and its meaning Quality Elements of Call Forward Total FER(Frame Error Rate) Backward Total FER(Frame Error Rate) 4.5.7.1. Call Trace Start/End Function Function that starts/ends Call Trace with MS designated at random.
PAGE 4
STAREX-IS BSM Manual Fig. 4.5-30 Call Trace Display in the Process of Call Set SMD-011-PMA210 Page:452(877) Issue:1.
PAGE 5
STAREX-IS BSM Manual Fig. 4.5-31 Display of Call Set Process and Elements of Communication Quality SMD-011-PMA210 Page:453(877) Issue:1.
PAGE 6
STAREX-IS BSM Manual Fig. 4.5-32 Display of Communication Quality and Release Reason Fig. 4.5-33 Call Trace Stop Result SMD-011-PMA210 Page:454(877) Issue:1.
PAGE 7
STAREX-IS BSM Manual 4.5.7.2. Call Trace MS Display Function Function to display MS that currently uses • Command the mobile call tracing function. DIS-TRC-MS; • Input/Output Fig. 4.5-34 Terminal Display in use of Call Trace SMD-011-PMA210 Page:455(877) Issue:1.
PAGE 8
STAREX-IS BSM Manual 4.5.8. Number of (Active/Dormant) Data Call User Display Function Function to display Number of Data Call by Active/Dormant • Command DIS-DATA-CALL:PCP=a; a: PCP Number(0~2) • Input/Output Fig. 4.5-35 Result of the Number of DATA Call User Display SMD-011-PMA210 Page:456(877) Issue:1.
PAGE 9
STAREX-IS BSM Manual 4.5.9. DATA Call User Status Display Function by IMSI Command DIS-DATA-STS:PCP=a,IMSI=b; a: PCP Number(0~2) b: IMSI of MS • Input/Output Fig. 4.5-36 Result of DATA Call User Status Display by IMSI SMD-011-PMA210 Page:457(877) Issue:1.
PAGE 10
STAREX-IS BSM Manual 4.5.10. IOS Message Display Function This function is operated by inputting the IMSI of MS to trace, duration, etc in BSM and displays IOS trace information for all kinds of calls that MS attempts as visible information in text format in the BSM. • Command TRC-IOS : MS=a, BSC=b, FLAG=c, DURATION=d a: MS Number b: BSC ID(0~11) c: Start/Stop d: Trace Duration Time • Input/Output Fig. 4.5-37 IOS Message Display START Result SMD-011-PMA210 Page:458(877) Issue:1.
PAGE 11
STAREX-IS BSM Manual Fig. 4.5-38 IOS Display Message SMD-011-PMA210 Page:459(877) Issue:1.
PAGE 12
STAREX-IS BSM Manual Fig. 4.5-39 STOP Result of IOS Message Display Function SMD-011-PMA210 Page:460(877) Issue:1.
PAGE 13
STAREX-IS BSM Manual 4.5.11. POWER MONITORING Function Function to check the BTS power control in BSM • Command DIS-BTS-PWR:BSC=a,BTS=b,ITEM=c,[TIME=d]: a: BSC ID(0~11) b: BTS ID(0~47) c: Stop/Start d: Duration Time(1~100 min) • Input/Ouput Fig. 4.5-40 Power Monitoring START Result SMD-011-PMA210 Page:461(877) Issue:1.
PAGE 14
STAREX-IS BSM Manual Fig. 4.5-41 Power Monitoring Result Fig. 4.5-42 Power Monitoring STOP Result SMD-011-PMA210 Page:462(877) Issue:1.
PAGE 15
STAREX-IS BSM Manual 4.6. No.7 Command The function of BSM No.7 is to manage parameter information necessary for the operator to operate No.7. It is divided into the following function: 1) signaling link operation management and 2) the signaling link maintenance.
PAGE 16
STAREX-IS BSM Manual DIS-SLK-INFO Signaling Link Information Display INH-SLK Signaling Link Barring ALW-SLK Signaling Link Barring Release Table 4.6-4 Commands related to Signaling Terminal Commands Description CRTE-ST Signaling Terminal Definition(Create) DEL-ST Signaling Terminal Deletion DIS-ST-INFO Signaling Terminal Information Display Table 4.
PAGE 17
STAREX-IS BSM Manual Commands Description DIS-MTP2-TMR MTP L2 Timer Display CHG-MTP2-TMR MTP L2 Timer Change DIS-MTP3-TMR MTP L3 Timer Display CHG-MTP3-TMR MTP L3 Timer Change DIS-SCCP-TMR SCCP Timer Change CHG-SCCP-TMR SCCP Timer Change 4.6.1.2. Commands for Signaling Link Maintenance Function Table 4.6-9 Test Related Commands Commands Description TEST-SLK Signaling Link Test TEST-ST Signaling Terminal Test DIS-No7-CYC Test Cycle Display CHG-No7-CYC Test Cycle Change Table 4.
PAGE 18
STAREX-IS BSM Manual Output Fig. 4.6-1 Signaling Point Information Display 4.6.2.2. Change of Intra-Switching Office Signaling Point It changes Information for Intra-Switching Office Signaling Point. Command CHG-OSP:BSC=a,OSP_NUM=b; a = BSC Number( 00 ~ 11 ) b= OSP Number ( 00 ~ 65535 ) Input CHG-OSP:BSC_ID=0,OSP_NUM=5; Output Fig. 4.6-2 Change of Intra-Switching Office Signaling Point 4.6.2.3. Change of Local Switching Office Signaling Point It changes Signaling Point of Local Switching Office.
PAGE 19
STAREX-IS BSM Manual b = SP Number ( 00 ~ 65535 ) Input CHG-SP-INFO:BSC_ID=0,SP_NUM=1038 Output Fig. 4.6-3 Change of Remote Switching Office Signaling Point 4.6.2.4. Activation of Signaling Link Set Signaling Link Set indicates an aggregation of signaling links(Max 16 units). Activation of Signaling Link Set is to put all the defined Signaling Links in a in-service status. Command ACT-LKS:BSC_ID=a a = BSC Number ( 00 ~ 11) Input ACT-LKS:BSC_ID=0; Output SMD-011-PMA210 Page:467(877) Issue:1.
PAGE 20
STAREX-IS BSM Manual Fig. 4.6-4 Activation of Signaling Link Set 4.6.2.5. Deactivation of Signaling Link Set Function that puts all the defined Signaling Links in out-of-service status Command DACT-LKS:BSC_ID=a; a = BSC Number ( 00 ~ 01 ) Input DACT-LKS:BSC_ID= a; Output Fig. 4.6-5 Deactivation of Signaling Link Set SMD-011-PMA210 Page:468(877) Issue:1.
PAGE 21
STAREX-IS BSM Manual 4.6.2.6. Signaling Link Generation Signaling Link is the concept combing Signaling Data Link with Signaling Terminal. It connects Intra-Switching Office Signaling Point to local switching Office Signaling Point, and can define 16 units of Signaling Link. The definition of Signaling Link is used to expand the number of Signaling Links. Before Signaling Link is defined, first of all, Signaling Terminal and Signaling Data Link to be defined as Signaling Link should have been defined.
PAGE 22
STAREX-IS BSM Manual b = Signalling Link Code Input ( 00 ~ 15 ) DEL-SLK:BSC=0, SLC =3; Output Fig. 4.6-7 Deletion of Signaling Link 4.6.2.8. Signaling Link Activation Function to activate a defined Signaling Link. Before activated, the corresponding Signaling Link should have been successfully defined. Command ACT-SLK:BSC_ID=a, SLC; a = BSC Number ( 00 ~ 11 ) b = Signalling Link Code ( 00 ~ 15 ) Input ACT-SLK:BSC_ID=0, SLC=2; Display SMD-011-PMA210 Page:470(877) Issue:1.
PAGE 23
STAREX-IS BSM Manual Fig. 4.6-8 Activation of Signaling Link 4.6.2.9. Signaling Link Deactivation Function to deactivate the activated Signaling Link. Command DACT-SLK:BSC=a, SLC=b; a = BSC Number ( 00 ~ 11 ) b = Signalling Link Code ( 00 ~ 15 ) Input DACT-SLK:BSC_ID=0, SLC = 2; Output SMD-011-PMA210 Page:471(877) Issue:1.
PAGE 24
STAREX-IS BSM Manual Fig. 4.6-9 Deactivation of Signaling Link 4.6.2.10. Signaling Link Information Display Function to display information on Signaling Terminal, Signaling Data Link and Bit_Rate connected to Signaling Link. It can display information on entire Signaling Links and on Signaling Link designated. Command DIS-SLK-INFO:BSC_ID=a; a = BSC Number ( 00 ~ 15 ) Input DIS-SLK-INFO:BSC_ID = 0; Output Fig. 4.6-10 Signaling Link Information Display 4.6.2.11.
PAGE 25
STAREX-IS BSM Manual Fig. 4.6-11 Signaling Link Inhibit 4.6.2.12. Signaling Link Allow Signaling Link Allow is a function that allows the management of Signaling Link Status inhibited in the management of Signaling Link and then change to the status of availability. Command ALW-SLK:BSC_ID=0, SLC =0; a = BSC Number ( 00 ~ 11 ) b = Signalling Link Code ( 00 ~ 15 ) Input ALW-SLK:BSC_ID = 0, SLC = 0; Output SMD-011-PMA210 Page:473(877) Issue:1.
PAGE 26
STAREX-IS BSM Manual Fig. 4.6-12 Signal Link Allow 4.6.2.13. Signal Terminal Addition Signal Terminal indicates physical name of a Channel of STPA and can define 16 units of Signaling Terminal at a maximum. It is used to expand Signaling Terminal. Command CRTE-ST:BSC=a, ST_ID=b; a = BSC Number ( 00 ~ 15 ) b = Signalling Terminal ( 01 ~ 16 ) Input CRTE-ST:BSC_ID=0,ST_ID = 4; Output Fig. 4.6-13 Signaling Terminal Generation 4.6.2.14.
PAGE 27
STAREX-IS BSM Manual Fig. 4.6-14 Signaling Terminal Deletion 4.6.2.15. Signaling Terminal Information Display Function to display information about if it is linked with signaling link to a specific Signaling Terminal or all the Signaling Terminals. Command DIS-ST-INFO:BSC_ID =a; a = BSC Number ( 00 ~ 11 ) Input DIS-ST-INFO:BSC_ID = 0; Output Fig. 4.6-15 Display of Signaling Terminal Information SMD-011-PMA210 Page:475(877) Issue:1.
PAGE 28
STAREX-IS BSM Manual 4.6.2.16. Signaling Data Link Addition Signaling Data Link indicates Trunk Number to allocate as Signaling Link and is used to expand Signaling Data Link. Command CRTE-SDLK: BSC =a, VMP_ID=b, TRK= c ,TS_NO=d; a = BSC Number ( 00 ~ 11 ) b = VMP Number( 00 ~ 07 ) c = TRUNK Number( 00 ~ 16 ) d = Time Slot Number( 00 ~ 31 ) Input CRTE-SDLK: BSC_ID=0, VMP_ID=1, TRK=0 , TS_NO=16; Output Fig. 4.6-16 Signaling Data Link Generation 4.6.2.17.
PAGE 29
STAREX-IS BSM Manual Input DEL-SDLK:BSC=0, VMP=0, TRK= 5, TS_NO = 16; Output Fig. 4.6-17 Signaling Data Link Deletion 4.6.2.18. Signaling Data Link Information Display Function to display information on the defined Signaling Data Link and the status connected to Signaling Link. Command DIS-SDLK-INFO: BSC_ID = a; a = BSC Number ( 00 ~ 11 ) Input DIS-SDLK-INFO: BSC_ID=0; Output SMD-011-PMA210 Page:477(877) Issue:1.
PAGE 30
STAREX-IS BSM Manual Fig. 4.6-18 Signaling Data Link Information Display 4.6.2.19. SCCP Network Configuration Data Display Function to display SCCP Network Configuration Data for Intra-Switching Office Signaling Point, local Switching Office Signaling Point, and each sub-system. Command DIS-SCCP-NET:BSC_ID=a; a = BSC Number ( 00 ~ 11 ) Input DIS-SCCP-NET:BSC_ID=0; Output Fig. 4.6-19 SCCP Network Configuration Data Display SMD-011-PMA210 Page:478(877) Issue:1.
PAGE 31
STAREX-IS BSM Manual 4.6.2.20. SCCP Local Subsystem State Data Display Function to display State related to Local Exchange Sub-system defined at Local Exchange Signaling Point Command DIS-SCCP-LSS:BSC_ID =a; a = BSC Number ( 00 ~ 16 ) Input DIS-SCCP-LSS:BSC_ID = 0; Output Fig. 4.6-20 SCCP Local Subsystem State Data Display 4.6.2.21.