User's Manual

KBB-710
www.lg.com
1
2
Product Overview
LED indicator
Rolling magnets
Key pad
Battery cover
Stand
Using the Product
Install the battery
- When using the keyboard for the rst time, open the battery cover at the top center of the
keyboard by pressing your ngernail against the slit on the battery cover.
- Remove the protective lm between the AAA battery included in the keyboard and the
positive (+) and negative (-) poles. Insert the battery in the correct direction, and then close
the cover.
Note: Only use batteries approved by the manufacturer.
Position a device
- Open out the stand by pressing your ngernail against the slits on the top left and right of the
keyboard, and then place your device on the stand.
3
4
Power off
When you power off the product, be sure to close it in the direction of the arrows.
* Failure to follow the instructions in this manual may result in fault or malfunction and the
product may not power off properly.
Pair the keyboard with a device running Windows® 7 or 8
Some keys may not be supported by Windows OS.
1. Power on the keyboard by opening it completely.
2*. Press and hold down the “1” key for at least 2 seconds.
- When in pairing mode, the blue LED indicator blinks at 1-second intervals for 2 minutes.
3. Select Control Panel > Add devices and printers > Add a device.
4. Select “LG Rolly KBB710”. Follow the onscreen instructions to complete the pairing.
5. When pairing is complete, the LED indicator changes to blue for 3 seconds and then dims.
Multi Pairing
1. To add a second device, press and hold down the “2” key for at least 0.2 seconds.
(To add a third device, press and hold down the “3” key for at least 0.2 seconds.)
or
The blue LED blinks, and the connection waiting mode is enabled.
2. Search “LG Rolly KBB710” on the second device and connect it
(Refer to “Pairing the Keyboard with a Device” on page 3).
3. When connection is made, the purple LED is turned on for 3 seconds, and then turned off
again.
- The purple LED blinks for 3 seconds when connecting to the third device.
4. If you intend to use the keyboard with a different device, hold the corresponding device
selection button for more than 0.2 seconds.
5. If you intend to connect the keyboard to a new device, hold the corresponding device
selection button for more than 2 seconds to enable the connection waiting mode.
- Refer to “Pairing the Keyboard with a Device” for the rest of the procedure.
y
Once the keyboard has been paired with an Android or Windows device, the pairing process
will not need to be repeated to reconnect to previously paired devices.
y
If you pair a new device when the keyboard has already been paired with two devices, the
last paired device is unpaired.
LED Indicator
The LED indicator will light up according to the tables below.
To check the battery level, press the “Fn + Space” keys.
Battery level
Status Action
Battery level is at 15% or above Blinks blue ve times
Battery level is at 5 to 15% Blinks red ve times
If the battery needs charging, the red LED keeps blinking even if there is no input. When the
battery runs low or is fully discharged, replace it with a new AAA battery.
5
6
7
8
WARNING: This product contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Call [phone] for more information.
Wash hands after handling.
Part 15.19 statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Part 15.21 statement
Changes or modications not expressly approved by the manufacturer
(or party responsible) for compliance could void the user’s authority to
operate the equipment.
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/television technician for help.
Troubleshooting
If the keyboard does not operate following installation or is not recognized.
y
Make sure the batteries are not too weak.
y
To determine whether the keyboard or the paired device is causing the problem, test the
keyboard by pairing it with another device if possible; or test another keyboard with your
currently paired device.
If you are still unable to solve the problem, please contact your point of sale or your dealer.
If you need to exchange the keyboard, please note that you must return it to your dealer in
its original packaging with proof of purchase (receipt); keep your receipt in a safe place after
purchase.
Standard Bluetooth 3.0
Frequency range 2402 ~ 2480 MHz
Operating temperature 0°C to 40°C
- Hot keys
Text cut
iOS: Cmd + X
Android/Windows OS: Ctrl + X
Text copy
iOS: Cmd + C
Android/Windows OS: Ctrl + C
Text paste
iOS: Cmd + V
Android/Windows OS: Ctrl + V
Language select
iOS 8 or earlier: Cmd + Space
iOS 9 or later: Ctrl + Space
Android: Shift + Space
Pairing the Keyboard with a Device
This product can be connected and used with up to three Bluetooth ® devices.
Set up your Bluetooth device by following the instructions below:
Pair the keyboard with an Android™ OS or iOS device
1. Power on the keyboard by opening it completely.
2*. Press and hold down the “1” key for at least 2 seconds.
- When in pairing mode, the blue LED indicator blinks at 1-second intervals for 2 minutes.
3. Search for the keyboard on the primary device you want to pair with, or select “LG Rolly
KBB710” among the searched devices.
- Some devices may require you to enter a PIN. Press and hold the Fn key while entering
the PIN.
4. When pairing is complete, the LED indicator changes to blue for 3 seconds and then dims.
User Guide
Rev 1.0 US
All rights reserved.
LG Electronics Inc., 2015
Note: Please read all information
carefully prior to using the KBB-710 in
order to prevent product damage and to
enjoy the best performance.
WARNING
Battery
Batteries can overheat, explode, and catch re.
Follow the instructions below to ensure safe and efcient use of the battery.
y
Only use batteries approved by the manufacturer.
y
Keep the battery out of reach of pets and children.
y
When visibly swollen or corroded, the battery may be hazardous.
Please contact the manufacturer or seller.
y
Keep the battery away from heat sources. (Never place in a microwave oven.)
y
Do not keep the product in a conned space for a long time with the power on.
y
Ensure the battery connectors do not come into contact with metal objects such as necklaces,
coins, keys, and watches.
y
Never disassemble, modify, compress, or pierce the battery. If the battery has been severely
impacted, discard and replace it immediately.
y
Do not drop the battery from a height or subject it to impact or shock.
y
Store the battery at room temperature (0°C to 50°C) and never expose it to temperatures of
60°C or above.
y
Do not touch the battery with wet hands or allow it to come into contact with moisture.
y
There is a risk of explosion if the battery is not replaced correctly. Dispose of used battery
according to the manufacturer’s instructions.
y
For safety purposes, be sure to read the user guide before using the product.
y
Always store the battery in a protective battery case to prevent external shock.
CAUTION
Keyboard
y
Only use batteries approved by the manufacturer.
y
There may be compatibility issues when connected to some products.
LG Electronics does not guarantee compatibility with all peripherals.
y
Functions may vary depending on the device and OS.
y
The stand may not hold a particular device depending on the type and orientation of the device.
The angle may vary depending on the device.
y
Do not use the product in a damp place such as a laundry room or bathroom. This may result in malfunction
or electric shock. Always use the product within the recommended temperature and humidity range of 10 to 35°C
and 20 to 80% RH.
y
Always use the product in a clean, dust-free environment.
Otherwise this may cause a malfunction.
y
Set up the product on a stable base with no risk of falling.
Otherwise this may result in damage to the product or personal injury.
y
Do not place heavy objects on the product.
Failure to follow this precaution may result in malfunction. Such objects may fall and cause personal injury or
damage to the product.
y
Spilling water, coffee, juice, or any other liquid on the keyboard may result in damage to the product or
malfunction.
y
Do not place glasses or containers containing chemicals or water on or near the product.
Getting water inside the product may cause a re.
y
Do not place a lit candle, cigarette, etc. on the product.
This may result in a re.
y
The underside of the product may become hot while in use. Avoid touching it or using the product on
your lap.
y
After having the product serviced, ask a technician to perform a safety check on it.
Using the product without a post-servicing safety check may result in re.
y
Keep the product away from heating appliances.
Being too close to a heat source may cause the product to deform or to be set on re.
y
Do not leave the product unattended in a vehicle.
This may result in explosion of the battery or re due to high temperature.
y
When not using the product for a long period of time; turn the power off to prevent unnecessary use of
the battery power.
y
Always use replacement parts approved by LG Electronics Inc™.
Otherwise this may result in re or damage to the product.
y
Do not disassemble or modify the product.
Doing so can void the warranty, even within the warranty period.
y
Be careful when touching a part or device.
Incorrect handling may result in damage to the product.
y
When removing a part or device from the product, be careful not to drop it.
The dropped part or device may cause personal injury or damage to the product.
y
The magnets and small parts of the product are a swallowing hazard for children.
y
If you have a medical device implanted, consult your doctor before using the product.
y
The fabric used between the key rows may not withstand excessive pulling and twisting and should be
handled with care.
y
The magnets used in the product may damage magnetic cards or affect the operation of pacemakers,
etc.
y
When on board an aircraft, always follow the crew’s instructions.
Incorrect use of the product on the airplane may result in aviation accidents.
y
Keep the product away from direct sunlight.
Direct sunlight may cause deformation of the product or re due to the increase in temperature.
y
Do not store the product in a conned space such as a bag for a long period of time, or repeatedly, with
the power on.
This may result in a re due to the battery overheating.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Bluetooth ® is a registered trademark of Bluetooth SIG, Inc. worldwide.