Manual 2013.01.10 Ver:1.
1. Booting 1. Download verification OS, and check logo for verification OS.
2. Setting (1/7) 1. Run by selecting the “Settings" icon on the Home screen.
2. Setting (2/7) 2. Select 'WiFi (1)‘, and move button from OFF to ON (2).
2. Setting (3/7) 3. When the scan is completed, the screen will appear briefly scanned AP list. Select the AP you want to connect to. The number of terminal per AP limit as 20.
2. Setting (4/7) 4. When the AP connection password settings screen, enter the password (1), and press ‘Access’(2) button.
2. Setting (5/7) 5. Screen of the AP connecting.
2. Setting (6/7) 6. Screen of the AP connection complete.
2. Setting (7/7) 7. When the connection is completed, press the "HOME" button, and go to the main screen, .
3. Wi-Fi (1/5) 8. Run by selecting the “Browser" icon on the Home screen.
3. Wi-Fi (2/5) 9. Click your web browser address bar (1), and enter "smart.kbs.co.kr/live".
3. Wi-Fi (3/5) 10. Once connected the test web page, select "KBS24". The number of terminal per broadcast limit as 20.
3. Wi-Fi (4/5) 11. When information pop-up appeared, select "OK“ button.
3. Wi-Fi (5/5) 12. Check that broadcasting is normal during 12 hours.
• • • • • • • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The tablet(LPT-100SB) is attached to the body of the robot. Not used alone to remove the tablet from the robot.