Sistema de Recaudo Control e Información y Servicio al Usuario Proyect Maintenance and Repair Manual (Heavy) Equipment Name CB-EVA-HM-00-V1.
Bogota SIRCI Project Document Maintenance and Repair Manual (Heavy) CB-EVA-HM-00-V1.
Bogota SIRCI Project Maintenance and Repair Manual (Heavy) Document History Previous Version Present Document CB-EVA-HM-00-V1.
Bogota SIRCI Project Maintenance and Repair Manual (Heavy) Table Of Contents 1. VALIDATOR STRUCTURE ............................................... ............................................... １ 1.1 Outline .............................................................. .............................................................. １ 1.2 External/Internal structure and main module ............................ １ 1.2.1 External structure ................................................... １ 1.2.
Bogota SIRCI Project User Requirement Definition 1. Validator structure 1.1 Outline Validator is the device that recognize bus passenger’s card. 1.2 External/Internal structure and main module 1.2.1 External structure 210mm 210mm(W) mm(W) 210mm 210mm(W) mm(W) Division Size Material Contents 210mm(W) x 210m(H) x 65mm(D) Aluminum + SPCC CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 1.2.2 Main module structure I 210mm 210mm(W) mm(W) 1) 2) 3) 3) 4) 210m 210mm(H) Validator Name 1) 7 Segment FND (3DIGIT + 4DIGIT) 2)7 Segment FND (3DIGIT + 4DIGIT) Explanation Display the deducted amount of card Display the after deducted amount of card 3) O, X LED Determine whether the card is recognized 4) RFID Antenna ISO14443 Type A/B, 13.56MHz recognize the Card and recharge. CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 1.2.3 Internal structure Main Board Main Board Display Board Antenna Board CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 1.2.4 Main module structure 1) 7 Segment FND(3DIGIT + 4DIGIT) Display deducted amount of card and after deducted amount of card. 2) O, X LED Check card recognition 3) RFID Antenna RF interface for reading 13.56MHz RF Card 4) Main Board Control all parts of Validator, transfer processed information of each accessory to Main ser ver.
Bogota SIRCI Project User Requirement Definition 2. Error handling 2.1.1 Supply the power (1/2) CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 2.1.2 Supply the power (2/2) Check U14 Output 1.3V Check U18 Output 5V Check U17 Output 3.3V CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 2.1.3 USB Trouble (1/2) CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 2.1.4 USB Trouble (2/2) Check U1 Output Pin No. 1 5Votage CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 2.1.5 RTC Trouble (1/2) CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 2.1.6 RTC Trouble (2/2) Check Check U15 Reset IC CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3. Device maintenance 3.1 Main Board 3.1.1 Outline Control all parts of Validator, transfer processed information of each accessory to Main server. 3.1.2 Structure Main Board Main Board Display Board Antenna Board CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3.1.3 Spec 1) Main Board Spec RC531 NOR FLASH S3C2440 EXT UART ETHERNET POWER Part NAND FLASH RC531 SIM SLOT CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition Control all parts of Validator, transfer processed information of each accessory to Main ser ver. CPU - S3C2440(ARM9 Core) : 400MHz Memory - SDRAM : 128MByte - Nor : 8MByte - Nand : 512Myte RF Module - RC531( Type A,B) External PORT - Ethernet : 1EA - USB1.1 : 1EA - RS -232 : 1EA SAM - Socket 4EA(SIM Type) 2) Display Board Spec 7 Segment FND Backlight LED O, X LED CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3.1.4 Replacement method 3.1.4.1 Separation back cover 1 2 ① Loosen fixed 12 bolts and separate cover. ② Remove the cover and 4 inside connector and separate back cover completely. 3.1.4.2 Cable separation ① 1 CB-EVA-HM-00-V1.0 2 Loosen the hex nut to separate circular connector ② Loosen the 4 hex nuts to separate speaker.
Bogota SIRCI Project User Requirement Definition 3.1.4.3 Separate external enclosure and internal Bracket. ① Loosen 2 fixed bolts of each sides and lift PCB fixed Bracket in the direction of the arrow in the picture. 3.1.4.4 Separate inside Bracket and PCB Bracket ① Loosen fixed 4 bolts and push Bracket slightly and separate board. CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3.1.4.5 Separate PCB Bracket and Main PCB ① Loosen 4 fixed bolts and pick up the board, separate connectors as shown to the right picture and separate the board completely. 3.1.4.6 Separate PCB Bracket and Display ① Loosen 4 fixed separate display board. bolts and 3.1.4.7 Separate Antenna board ① Loosen 3 fixed separate antenna board. CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3.2 Maintenance Flow chart Receive replacement parts Error Check ERROR CODE Check maintenance referral and ERROR CODE Device maintenance and replacement due to MANUAL Device repair due to MANUAL Conduct TEST Conduct TEST OK NO OK NO Repair complete Repair complete 1) Required tool: Driver, tester, etc. 2) Precautions - Check each part of the adjustment value for every 12months or in a timely manner. CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition 3) Detail check items No Items 1 month Inspection cycle 3months 6months 12months Note Power/Voltage Check 1 2 Check LCD operation 3 Check O,XLED operation 4. Validator installation and update 4.1 Validator installation 4.1.1 Process No 1 Division Device registration Contents 1) USB mounting method 2) SAM mounting 3) Power ON … … … Note … 4.1.2 Device registration 4.1.2.1 USB mounting method ① Turn OFF terminal.
Bogota SIRCI Project User Requirement Definition 4.1.2.2 SAM mounting ① Picture 1: Loosen fixed nut and separate back case. ② Push SAM socket in the direction of the arrow shown in picture 2, and lift like picture 3. ③ After combined SAM, push and combine completely. ④ Combine all of SAM and assemble back case. 4.1.2.3 Power ON ① Connect adopter to outlet. ② When hear BUZZER, normal booting complete < SIM CARD > CB-EVA-HM-00-V1.
Bogota SIRCI Project User Requirement Definition FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
