Information For more information on Lezyne products, visit: http://lezyne.com WEEE Notice & Product Disposal: The symbol of the crossed waste container means that, in accordance with2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE),once the product reaches the end of its lifecycle, in the European Union it is subject to special waste disposal. In addition to the present device, this rule is also applied to all items carrying such a symbol.
Warranty Lezyne GPS devices carry a one (1) year warranty from the original purchase date to the original owner (proof of purchase is required.) This warranty covers materials and manufacturing defects on the GPS housing, electronics, and the mounting bracket supplied.
Table of Contents • • • • • • • Getting Started – Buttons – Screen Icons – Charging GPS – Installing GPS – Turning on GPS – GPS Satellite Signal – Starting a Ride – Ending a Ride – Uploading a Ride to your Computer Screen Set up – Layout – Fields – Unit Format – Brightness (Backlight) Time Set up page.
Getting Started Buttons Press for Back button function Hold for 2 seconds to turn ON/OFF the device Press to Scroll left through pages ENTER Press to ENTER a selection in the menu screen Press to turn Backlight ON/OFF MENU Hold to access the MENU screen Press to move UP in the menu screen Press to Scroll right through pages LAP Press to start a ride Hold to end a ride Press to move DOWN in the menu screen During a ride, Press to mark a LAP Ride Screen Button Functions Press Hold Scroll Left Scroll R
Getting Started Menu and Pause Screen Button Functions Press Hold Back Up Select Down Screen Icons GPS Status Battery Status Lezyne Track Power Sensor Phone Connection Heart Rate Sensor Sensor Status Cadence Sensor Speed Sensor Shifting Sensor 6
Getting Started Charging Before using your Lezyne GPS device for the first time, fully charge battery and it is also recommended to visit lezyne.com/gpsroot and update your GPS device to the latest software. 1. Remove exterior moisture. 2. Open USB cover. 3. Connect micro USB cable and device to powered USB port. For best results, use the supplied Lezyne cable. If device does not display charging symbol when plugged in, selected USB port may not be powered – try another USB port.
Getting Started Turning on the GPS Turn on your GPS by holding the left button. Press and hold for 2 seconds to turn on GPS Satellite Signal Before a ride can start there must be status of a GPS signal present. This can take 30 to 90 seconds. For best results: 1. Go outside to open clear area. 2. Place the GPS device so it’s not obstructed to the sky. 3. Wait for a GPS status dot to fill in. *a pop up notice will appear if you try to start a ride before a GPS signal is present.
Getting Started Starting a Ride 1. Wait for a GPS signal. 2. Start recording by pressing the bottom right button. 3. Ride data is recorded when the timer is running. A recording indicator will blink in the upper right corner 4. Press the top right button or top left button to see scroll through pages showing ride metrics. Press to start recording a ride Ending a Ride Enter the pause menu by holding the bottom right button .
Getting Started Uploading a Ride to a computer 1. 2. 3. 4. Remove the USB port seal. Connect your GPS to a computer via Micro USB cable. The GPS will read like a USB drive with included folders. Within the Lezyne GPS folder find your .Fit ride files in the Activities folder to upload and share at www.lezyne.com/gpsroot USB Seal Its important to re-install the USB seal between the two seal locks to maintain a good seal against the weather.
Menu Options Menu Screen Hold the top right button Menu options include: • • • • • Alert Auto Bike Personal Records • • • • • to enter the MENU screen Personal Records Phone Navigation Sensors • • • • Screen Time Info Strava* *only appears if segments have Screen Setup been saved on the device The GPS device can be set up manually on the device or through the Ally Phone APP.
Screen Set up Data Pages Data Pages 1. Press the ENTER button and you can set up how many pages you want to see Page Setup There are ten display options for each page: • 2 Lines of Data and up to 8 Lines of Data To change the Layout, 1. Scroll up or down to the page number you want to change and press the left ENTER button. 2. In the No. of fields press enter and use the right buttons to scroll up and down until it lists the desired lines of data to display. 3. Press ENTER to select.
Screen Set up Data Selection Display In Fields you can choose what data metrics to display on each data line. Move Up or Down to the line you want to change and Press ENTER. Scroll Up or Down to make the change and Press ENTER.
Screen Set up Units Format Display In Units you can choose between Miles or Kilometers format. And Temperature in °F or °C Press ENTER and toggle up or down, press ENTER to select the setting. Background Display In Background you can choose to have it set to WHITE or BLACK. Press ENTER and use the right buttons to make the selection. When done press the BACK button.
Screen Set up Backlight Display In Backlight you can choose what percentage of light that is displayed from the backlight. Press ENTER and use the right buttons to INCREASE or DECREASE. Use the ENTER button to make the adjustments. When done press the BACK button. . Contrast Display In Contrast you can choose the percentage of contrast that is displayed from the screen. Press ENTER and use the right buttons to INCREASE or DECREASE. Use the ENTER button to make the adjustments.
Screen Set up Notification Font Size In Notification you can choose Large font or Small font size for displayed notifications. Press ENTER and use the right buttons to select size. Use the ENTER button to make the selection. Time Set up Time Format Time Format adjusts time display from 12hr to 24hr format. Press ENTER and use the right buttons to select 12 hr or 24 hr. Press ENTER to make the selection.
Time Set up Time Zone Time Zone adjusts time based on your closest location. Press ENTER and use the right buttons to select. Press ENTER to make the selection. Daylight Savings Daylight Savings adjusts time accordingly if it applies to your location. Press ENTER and use the right buttons to select. Press ENTER to make the selection.
Phone Pairing – Ally App Pairing to the Phone 1. Download the free Lezyne GPS Ally App v2 to your phone. • Google Play for Android or App Store for iPhone. 2. Open the App to the Device tab and tap Scan for Device. 3. On your Lezyne GPS device, go into the Menu to Phone and press ENTER. 4. In Phone, select either iPhone or Android using the arrow buttons and press ENTER, this will make the device visible to the phone. 5. The GPS Ally App will show the Lezyne device you are looking to pair.
Phone Pairing – Ally App Phone Pairing Reset If issues occur pairing a phone or if it’s pairing to a phone you don’t want it to anymore then you reset the phone pairing. This will clear the stored phone info. 1. In Phone, select Reset using the arrow buttons and press Enter to make the selection.
Phone Pairing – Ally App Setup Support Anytime you need more assistance in setup, Tap on the More option and go to Support for linked video tutorials. Tap here to begin GPS Settings (Device Setup) Once the Ally App is installed on your phone and the phone is paired to the GPS device you can proceed to use the App to setup the GPS device. Tap on the More option and go to GPS Settings.
Phone Pairing – Ally App General Setup In General Setup you can adjust settings for Alert, Auto, Personal, Navigation, Screen, Time and Strava.
Phone Pairing – Ally App Bike and Screen Setup In Bike and Screen Setup you can create up to 5 Bike profiles. And then customize the screen set up for each bike profile. Set the bike profile by Name, Sport Type, Wheel Circumference, Bike Weight, and the Odometer.
Phone Pairing – Ally App Screen Setup In Screen Setup you can create up to 5 pages and have them customized with 2 to 8 fields of data. 1. Simply tap on the number field to change data fields 2. Tap to select the data field to be changed 3. Make the selection of which metric you want to see 4. Hit OK.
Phone Pairing – Ally App Notifications Set up When the Lezyne GPS devices are paired with the Lezyne GPS Ally App v2 they can display Text, Email, Call Notifications and many more. See your phone settings for more on messages. * To enable this feature you must first make sure your phone notifications are turned on for Text and Email. See your phone instructions for details. 1. In Lezyne GPS Ally App v2, go to the Settings tab and turn on Notifications.
Navigation Navigation Set up When the Lezyne GPS devices are paired with the Lezyne GPS Ally App v2 they work together to display Turn by Turn directions. In the Lezyne GPS Ally App v2, on the Navigation tab, you can search by: • Viewing the map and tapping a location where you want to go. • Typing in an address in the search box. • Typing the name of the location in the search box. Once the location is determined, multiple route options are available. • Choose your desired course and tap GO.
Navigation Navigation Custom Routes Custom routes can also be created with the Ally V2 App when your phone is paired with your GPS device. In the Lezyne GPS Ally App v2, on the Navigation tab, you can search by: • Viewing the map and tapping a location where you want to start. • Begin tapping along points where you want the route to go.
Navigation Navigation Set up The Lezyne GPS devices are capable of communicating your location to the Lezyne GPS Ally App v2 to assist in navigation. If you were to get off course an automatic Rerouting would take place within the Lezyne GPS Ally App v2 that would send new directions to your GPS device. If you don’t want Rerouting to happen during your directions and to keep the same route, the Rerouting feature can be turned off.
Navigation Navigation GPS Root In the Lezyne GPS Root website, on the Routes tab, you can create Routes. Routes can be based on Cycling, Hiking/Walking, or Driving specifics. Saved Route can be accessed from the Lezyne Ally and pushed to GPS devices for Turn by Turn directions. • Location Searches can be done by the address, name, or clicking on map locations 1. Once a location is created, start to finish points set, hit calculate and choose your Route Option. 2. Save the Route by naming it.
Navigation Breadcrumb Mapping Once set to record, the Lezyne GPS will record a Breadcrumb Map displaying where you have been. 1. Press the lower right record button display. and the breadcrumb map will begin to Route Mapping When Navigation is being used, a Route Map will show the start, finish, and real time location on that route.
Tracking/Training Strava Sync Set up - App In the Lezyne GPS Root website or in the Lezyne GPS Ally App v2, you can sync your activities to Strava, the popular social network. Activities can be set to sync automatically when uploaded or one at a time While in the Ally App set your account to sync with Strava simply by logging in through the Settings tab in the Ally App and GPS Root website. Lezyne GPS Ally App v2 Sync 1. Go into the App Settings in the More tab. 2. Tap on Connect with Strava. 3.
Tracking/Training Strava Sync Set up - Website Strava sync setup can be done on either the Lezyne Ally V2 App or Lezyne GPS Root website. Lezyne GPS Root Sync 1. Click on Settings to Sync with Strava. 2. Click on Connect with Strava button. 3. You’ll be asked to log into to Strava. 4. A page will appear to confirm the connection. Click on Authorize to confirm. 5. You can set rides to auto sync as you upload them or upload one at time when viewing the ride.
Tracking/Training Strava Segments Set up *STRAVA Premium Membership Needed* In the Lezyne GPS Root website or in the Lezyne GPS Ally App v2, you can sync Strava Segments from the popular social network. strava.com/premium While in the GPS Root or Ally App set your account to sync with Strava simply by logging in through the Settings tab in the Ally App and GPS Root website.
Tracking/Training Training Peaks™ Set up Training Peaks is a way to track your ride data and much more. • Speed • Distance • And any sensor information that you are connected to *An Account with Training Peaks will need to be set up before you can sync. Lezyne GPS Root/Ally App Sync 1. Click on Settings to Sync with Training Peaks. 2. Click on Connect with Training Peaks button. 3. You’ll be asked to log into Training Peaks. 4. And then a page will appear to confirm the connection.
Tracking/Training Lezyne Track Set up Lezyne Track is a way to share your ride information in real-time with friends, family, or whomever you decide to include. They will be sent an email with a hyperlink that will send them to a map showing your: • Location • Speed • Distance • And any sensor information that you are connected to All you need is their email address to create a contact list and when you hit record on the Lezyne GPS device a message will be sent letting them know you’re out on a ride. 1.
Tracking/Training Training Program Set up Lezyne GPS computers can sync with Training Peaks™ and Today’s Plan to import workouts into the device. See websites for account details and creating work outs. Open the Lezyne GPS Ally App Tap the More Tab in the Ally App to find Training Programs. Tap on either Training Peaks or Today’s Plan in order to login and sync Once logged in and back in the Ally App, swipe down to refresh the page. If a workout is scheduled for the current day it will appear at the bottom.
Tracking/Training Training Program Set up 1. Once the scheduled workout is sync to a GPS device, a command prompt will appear on the device screen. 2. Training Start Now? Will appear on the screen. Select Yes to begin or No to begin workout later during your ride 3.
Tracking/Training Training Program Set up Recorded rides and rides with workouts can sync with the training programs if the Auto Sync features are turned on. GPS Root/Ally App Sync 1. Click on Settings to Sync with a selected program. 2. If you click on a program that is not setup, a login screen will appear for that site 3. Once logged in you’ll need to Authorize to complete the setup. 4.
Sensor Pairing Sensor Set up The Lezyne Mini and Macro GPS can pair with only Bluetooth Heart Rate Monitors. The Micro, Micro C, and Super GPS can pair to both Bluetooth® and ANT+™ * Before you pair your Sensors, see the manufactures' instructions on how to pair with devices. 1. In Sensors, press ENTER to access. Choose the sensor type you want to pair and press ENTER. • Heart Rate • Speed & Cadence • Speed • Power • Cadence • Shifting 2. Depending on your device type select either Bluetooth ®or ANT+ ™ 3.
Sensor Pairing Power Meter Set up * Before you pair your Power meter, see the manufactures instructions on how to set up, pair, and calibrate the meter with devices. 1. In Power, press ENTER to Pair. The device will search for Power sensors in range. *This could take a couple minutes* 2. Select the sensor you are trying to pair. *(See name or ID numbers that match your device) When complete, the GPS device will read Paired. 3.
Bike Set up Wheel Circ (Circumference) Set up Wheel Circumference calibrates the speed sensor to accurate display your speed based on the size of your wheel. This is needed if using a speed sensor. *Paired Speed Sensors will take over recording speed and distance and no longer use information from the GPS. Press ENTER and use the right buttons to INCREASE or DECREASE. Use the ENTER button to make the adjustments. When done select BACK or press the ENTER button.
Personal Set up Sport Type Sport Type gives you the option to choose what best suits your type of activity and how it should be categorized for downloads. Press ENTER and use the right buttons to select. Press ENTER to make the selection. Language Setting Sets your desired language. Press ENTER and use the right buttons to select. Press ENTER to make the selection.
Personal Set up Age Setting Setting your age assists in calorie calculations. Press ENTER and use the right buttons to select INCREASE or DECREASE. Use the ENTER button to make the adjustments. When done select BACK or press the BACK button Weight Setting Setting your weight assists in calorie calculations. Press ENTER and use the right buttons to INCREASE or DECREASE. Use the ENTER button to make the adjustments. When done press ENTER or press the BACK button.
Personal Set up Height Setting Setting your Height assists in calorie calculations. Press ENTER and use the right buttons to INCREASE or DECREASE. Use the ENTER button to make the selection. Gender Setting Setting your gender assists in calorie calculations. Set your gender to Male or Female. Press ENTER and use the right buttons to select. Press ENTER to make the selection.
Auto/Preset Notification Set up Scroll Setting Automatic Scroll through the pages on the device while recording. Press ENTER and use the right buttons to select On or Off. Press ENTER to make the selection. Sync Mode Setting This will automatically Sync the ride data to the phone when you stop the ride. Which can then be sent to GPS Root or other 3rd party sites set up. Press ENTER and use the right buttons to select On or Off. Press ENTER to make the selection.
Auto/Preset Notification Set up Start/Stop (Pause) Setting The Pause setting is an automatic Start/Stop feature that controls recording of the ride if you stop for a period of time and will start back up once you begin to move. Press ENTER and use the right buttons to select On or Off. Press ENTER to make the selection.
Auto/Preset Notification Set up Lap Preset Notification Set up Lap preset allows you to set a notification pop up based on Time or Distance goals and stores the data in your .fit file. Press ENTER and use the right buttons to select Time or Distance. Press ENTER to make the selection and use the right buttons to INCREASE or DECREASE. When done press the ENTER button. To reset, select Off and repeat the steps for set up.
Alert Set up Ride Distance Alert Set up Ride Distance alert gives you a pop up alert when you complete a set distance goal. Press ENTER and use the right buttons to INCREASE or DECREASE. When done press the ENTER button. To reset, select Off and repeat the steps for set up. Ride Time Alert Set up Ride Time alert gives you a pop up alert when you complete a set goal for an amount of time. Press ENTER and use the right buttons to INCREASE or DECREASE. When done press the ENTER button.
Alert Set up Calories Alert Set up Calories alert gives you a pop up alert when you complete a set goal. Press ENTER and use the right buttons to INCREASE or DECREASE. When done press the ENTER button. To reset, select Off and repeat the steps for set up. Minimum HR (Heart Rate) Alert Set up Minimum Heart Rate alert gives you a pop up alert when you hit a set minimum limit. Press ENTER and use the right buttons to INCREASE or DECREASE. When done press the ENTER button.
Alert Set up Maximum HR (Heart Rate) Alert Set up Maximum Heart Rate alert gives you a pop up alert when you hit a set maximum limit. Press ENTER and use the right buttons to INCREASE or DECREASE. When done press the ENTER button. To reset, select Off and repeat the steps for set up. Speaker Set up *(Super GPS only) The Speaker setting turns it on when ever a button is pressed. Press ENTER and use the right buttons to select On or Off. Press ENTER to make the selection.
Records Review Review lets you see the details of stored rides on the device. Press ENTER and use the right buttons to select the ride you want to see by date and time. Press ENTER to make the selection. Erase All Erase All will delete all rides recorded and stored on the device. Press ENTER and use the right buttons to select Yes or No. Press ENTER to make the selection.
Records Erase Oldest Erase Oldest will delete the oldest ride recorded and stored on the device. This is for when you need more room for recording and know the oldest file is not important but want to keep other rides. Press ENTER and use the right buttons to select Yes or No. Press ENTER to make the selection. Memory This lets you know how many hours of recording time you have remaining.
Records Reset Trip 1 This allows you to delete the recorded distance in Trip 1. Press ENTER and use the right buttons to select Yes or No. Press ENTER to make the selection. Reset Trip 2 This allows you to delete the recorded distance in Trip 2. Press ENTER and use the right buttons to select Yes or No. Press ENTER to make the selection.
Reset Odo (Odometer) This allows you to delete the accumulated miles on the Odometer. Press ENTER and use the right buttons to select Yes or No. Press ENTER to make the selection. Info Device This indicates the device type. Firmware The numbers in Firmware indicates which version is currently being used on the device.
Info GPS (Adaptive / 1 Second) This is where you can select the GPS chip to run GPS at 1 second intervals or run Adaptive. Adaptive bases signal request based on the GPS movement and can increase the runtime of the device. GPS (Reset) When the GPS is first set up, it stores satellite location information for quicker start ups. If you travel long distances, to different states or to other countries, and experience slow start ups, a reset will clear out all stored location data and start it fresh.
Info HDOP, VDOP This is the quality of the GPS data. Horizontal Dilution of Precession. Vertical Dilution of Precession. Battery The current battery voltage.
Info FCC ID FCC certification number for the device IC Industry Canada certification number RCM The three existing compliance marks (C-Tick, A-Tick and RCM) are being consolidated into a single compliance mark—the RCM Bluetooth LE Software version of Bluetooth LE ANT+™ Software version of ANT+™ 56
Specifications – Mini GPS, Micro GPS, Micro C GPS Battery Type Rechargeable Lithium polymer, 280 mAhr Battery Life Up to 14hrs Memory Size Up to 100hrs (Mini GPS) 150hrs (Micro GPS) Operating Temperature Range -20⁰C to 60⁰C (-4⁰F to 140⁰F) Charging Temperature Range 0⁰C to 45⁰C (32⁰F to 113⁰F) Water Rating IPX7 *tested in water 1m for 30min Weight 76g Specifications - Macro GPS, Super GPS Battery Type Rechargeable Lithium polymer, 850 mAhr Battery Life Up to 32hrs Memory Size Up to 100hrs
Data Metrics Explained Ascent: The total measurement of elevation gained that current ride Auto Scroll: Page scroll changes to show different information. Example: Avg Speed, Elevation, Temperature Auto Start/Stop: This will automatically pause the timer when you stop, and start when you begin to move.
Troubleshooting Updating Software Software updates/manuals can be found at http://www.lezyne.com/support-downloads.php 1. 2. 3. 4. Connect your device to your computer with the supplied USB cable. Go to the GPS Root website Download page and choose the software update that works with your computer. Allow the program to download and run on your computer. Follow the on screen instructions and do not disconnect your computer until its complete.
Troubleshooting Resetting with Bootloader When the application that runs the GPS becomes corrupted somehow and won't allow the GPS to start up, Bootloader will force the GPS into an update mode so that the GPS can be repaired. There might not be anything wrong with the device except that it won’t connect to a computer. That’s usually when you’ll need to use the bootloader. *Resetting the device with bootloader could delete settings and files. 1. GPS power off and unplugged from a computer. 2.