Dansk Nederland Wireless/Ethernet Card Installation Guide English Čeština Dell™ All-In-One Printer 966 Suomi Français Deutsch Italiano 日本語 Norsk Polski Português Русский Español Svenska w w w. d e l l . c o m / s u p p l i e s | s u p p o r t . d e l l .
English Installing and Configuring the Dell™ Wireless/Ethernet Card Tools required: a Phillips screwdriver Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your printer. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Installing the Card 1 Turn off your printer, and then unplug the power cable from the wall. CAUTION: Failure to unplug the printer can cause damage to your printer and card.
3 Remove the screws and the cover plate. CAUTION: Wireless cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch the card. 4 Unpack the card. Save the packaging materials. 5 Align the edges of the card into the guides on the left and right, and then slide the card into the printer. NOTE: To verify that your card is aligned properly, make sure the Ethernet port is located on the left side of the card.
English 6 Tighten the thumb screws on the left and right to secure the card. 7 Rotate the antenna until it points up. You are now ready to configure your card to work on your wireless or Ethernet network.
Setting up the Card to Work on a Wireless Network 1 Connect the power cord to the wall, and then press the Power button . 2 Connect your printer to your computer using a USB cable (sold separately). If any New Hardware Wizard screens appear, click Cancel. 3 Insert the Drivers and Utilities CD that came with your printer. The CD launches automatically. NOTE: If you do not have your Drivers and Utilities CD, you can download the appropriate software from support.dell.com.
English Setting up the Card to Work on an Ethernet Network 1 Connect your printer to your network using an Ethernet cable (sold separately). 2 Connect the power cord to the wall, and then press the Power button . 3 Insert the Drivers and Utilities CD that came with your printer. The CD launches automatically. NOTE: If you do not have your Drivers and Utilities CD, you can download the appropriate software from support.dell.com. 4 Select Network Installation, and then click Next.
Pr inte d i n C h ina M ay 200 6 L. P /N 13 A1 711 E .C .