RCD102seriesIM1084_19Feb_V10.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 17 RCD102seriesIM1084_19Feb_V10.
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! English CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS English 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions 5. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. It may damage the screen. 7.
English 24. Mains plug is used as disconnect device and it should remain readily accessible during intented use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the main socket outlet completely. 25. Minimum distance 10 cm around the apparatus for sufficient ventilation. 26. No naked flame sources such as lighted candles should be placed on the apparatus. 27. Attention should be drawn to the environmental aspects of battery disposal. 28.
English Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product.
LOCATION OF CONTROLS Refer to the image p.2 English 1. STOP button 2. STANDBY button 3. MODE button 4. SKIP – (BACKWARDS) button 5. SKIP + (FORWARDS) button 6. PLAY/PAUSE button 7. CD door 8. CD DOOR OPEN button 9. STANDBY Indicator 10. Program Indicator 11. Play/Pause Indicator 12. Repeat Indicator 13. LED Screen 14. FM SCAN button 15. FM RESET button 16. FM antenna 17. Battery Compartment 18. Headphone jack 19. FUNCTION selector (CD/RADIO/AUX) 20. VOLUME control 21. AUX IN jack FM RADIO OPERATION 1.
CD OPERATION English Play a CD 1. Press the CD DOOR OPEN button and carefully place a disc on the centre spindle with the printed label side facing up and close the CD DOOR OPEN button. 2. Press the STANDBY button to turn on the unit. STANDBY indicator is lit up in full brightness. 3. Slide the FUNCTION selector to the CD position. The LED display will show the total number of tracks on the disc. 4. Press PLAY/PAUSE and the PLAY indicator will light and the CD will start playing from the first track. 5.
Use the program function to preselect the order in which a sequence of tracks will be played. Up to 20 tracks can be programmed. 1. Slide the FUNCTION selector to the CD position. 2. Press MODE, program indicator will light and “01” will blink on the LED display. 3. Use SKIP FORWARDS or SKIP BACKWARDS to select the first track to include in the programmed sequence. 4. Press MODE to confirm and store the track. 5. Repeat steps 3 and 4 to program the other desired tracks. 6. Press PLAY to begin playback.
MAINTENANCE To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of the unit. Use caution when cleaning and wiping the plastic parts. Mild soap and a damp cloth may be used on the front panel. English Power supply: 230V AC ~ 50 Hz 10W or 6 x C/LR14 size batteries (9V FM: 87.
ed. RCD102seriesIM1084_19Feb_V10.
RCD102seriesIM1084_19Feb_V10.