ADD MORE www.lewitt-audio.com POWER TO YOUR TUNES.
MTP 340 CM / CMs Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. Music professionals know that it’s often the smallest details that make all the difference in vocal and instrumental recordings. With our MTP series, we aim to exceed artists’ and audio engineers’ expectations of reproduction accuracy and isolation of the main sound source.
MTP 340 CM / CMs The product Our MTP 340 CM and MTP 340 CMs are quality condenser vocal microphones with a thin diaphragm back-electret capsule which brings a high level of sonic detail to demanding vocal applications. No matter whether on stage or in the studio, the models’ tailored frequency response always allows for maximum precision and unsurpassed clarity, taking professional vocal tracking to the next level.
MTP 340 CM / CMs Features / Top applications Features ·Frequency response shaped specifically for vocal applications ·Uniform cardioid pickup pattern for minimum off-axis coloration ·High gain before feedback ·Easily withstands high sound pressure levels ·Effective integrated acoustic pop and windshield offers excellent protection against plosives and sibilance ·Highly durable, black all-metal construction, optimized for rough daily touring routine ·Minimally affected by varying load impedance ·The MTP 34
MTP 340 CM / CMs Using the mic Connecting and Disconnecting the Microphone Cable ·Before establishing connection, make sure that the microphone and the component (e.g. amplifier) are switched off. ·Lower the volume of the component (e.g. amplifier) before connecting the microphone. ·Insert the connector into the microphone socket. Align the key on the connector with the groove in the microphone, and then push the connector into the microphone until it clicks.
MTP 340 CM / CMs Using the mic / Tech data 49.7 Hints 1. In order to prevent feedback (howling): ·Lower the volume. ·Place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and the speaker. ·Do not cover the lower part of the grille with your hand. 2. Positioning the microphone close to the sound source causes the so-called proximity effect (a boost in the low frequency response).
MTP 340 CM / CMs Tech data Tech graph Tech data 5 dB / unit ·Acoustical operating principle: ·Directional pattern: ·Frequency range: ·Sensitivity: ·Equivalent noise level: ·Maximum SPL: dB ref . 1V / Pa ·Rated impedance: ·Rated load impedance: ·Supply voltage: ·Current consumption: ·Connector: ·Dimensions: ·Net weight: pressure gradient transducer, permanently polarized cardioid 90 ... 20.000 Hz 3,1 mV / Pa (-50 dBV) 25 dB-A (IEC 61672-1) 141 dB, 1 % THD 150 dB, 3 % THD < 200 ohms > 1.
MTP 340 CM / CMs Accessories Accessories MTP 40 MCs DTP 40 Lb 08
MTP 340 CM / CMs Cautions Cautions ·The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. ·To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. ·Keep this product out of the reach of children. ·Do not use force on the switch or cable of the microphone.
MTP 340 CM / CMs Warranty Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
MTP 340 CM / CMs Regulatory information LEWITT GmbH declares under its sole responsibility that MTP 340 CM / CMs complies with the European directive 2004/108/EC. The product has been tested according to harmonized European standards: EN 55013:2001+A1:2003+A2:2006 EN 55020:2007 EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Product testing was carried out by TIMCO Engineering Inc., notified body number 1177. WEEE note: Electronic waste has to be collected separately.
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.