www.lewitt-audio.com EMPHASIZE THE GENUINE IN YOUR SOUND.
LCT 240 Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. With the LCT Authentica Series, LEWITT introduces a new generation of highly versatile wired condenser microphones that all aim for setting new benchmarks of technology, sound quality and user-friendliness in both professional studio recording and onstage use.
LCT 240 The product With the LCT 240 2/3-inch diaphragm condenser microphone, LEWITT introduces a high precision multi-purpose tool that sets new benchmarks in terms of performance and ease of use. Designed for use in live performances as well as (home) studio recordings, the LCT 240 will leave a lasting impression with users expecting accurate and unaltered tracking of speech, vocals and instruments.
LCT 240 Features / Top applications Features ·2/3-inch small-diaphragm capsule with ultra-thin externally biased, gold-layered low mass diaphragm for powerful and natural sound reproduction ·Neutral frequency response for authentic sound onstage or in the studio ·Cardioid polar pattern for effective isolation of the main sound source ·Low self-noise and a total dynamic range of 130 dB provides an outstanding acoustic presence and powerful yet authentic sound ·3-position switchable pre-attenuation pad (0
LCT 240 Using the mic User-interface ① Status indicator ② Attenuation indications ③ Noiseless attenuation push button ④ High-pass filter indications ⑤ Noiseless high-pass filter push button Status indicator ① ·The microphone is in normal working mode if the status indicator is illuminated in white. ·The microphone is in key-lock mode if the status indicator is not illuminated. ·The microphone is experiences clipping due to high SPL if the status indicator flashes in red.
LCT 240 Using the mic High-pass filter indications ④ ·The currently active high-pass setting is illuminated. Setting a high-pass filter ·High-pass filters can be set by briefly pressing the noiseless high-pass filter push button ⑤ . Settings are: Off, 12 dB / octave at 40 Hz and 6 dB / octave at 300 Hz. High-pass filters eliminate unwanted low frequency noise such as structure borne noise.
LCT 240 Using the mic Clipping history A look up in the clipping history lets you know if the microphone had experienced clipping in the past. The microphone displays the clipping history after constantly pressing the high-pass push button ⑤ for 2 seconds. When in clipping history mode the status indicator ① flashes red and white in an alternating sequence the high-pass indications ④ are not illuminated.
LCT 240 Tech data 3 dB / unit 52 Tech graph Dimensions 138 dB ref.
LCT 240 Tech data Tech data ·Acoustical operating principle: ·Transducer Ø: ·Directional pattern: ·Frequency range: ·Sensitivity: ·Signal / noise ratio: ·Equivalent noise level: ·Dynamic range of mic. amp.: ·Max. SPL for 0,5 % THD: pressure gradient transducer, permanently polarized 17 mm 0,67 inch cardioid 20 ... 20.
LCT 240 Accessories Accessories LCT 40 Wx DTP 40 Mts DTP 40 Lb 10
LCT 240 Cautions Cautions ·The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. ·To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. ·Keep this product out of the reach of children. ·Do not use force on the switch or cable of the microphone. ·When disconnecting the microphone cable, grasp the connector and do not pull the cable.
LCT 240 Warranty Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
LCT 240 Regulatory information LEWITT GmbH declares under its sole responsibility that LCT 240 complies with the European directive 2004/108/EC. The product has been tested according to harmonized European standards: EN 55013:2001+A1:2003+A2:2006 EN 55020:2007 EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Product testing was carried out by TIMCO Engineering Inc., notified body number 1177. WEEE note: Electronic waste has to be collected separately.
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.