www.lewitt-audio.com PUT MORE BOOM IN YOUR CHA.
DTP 640 REX Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. With its DTP series, LEWITT introduces a complete family of cutting-edge, high-performance wired dynamic microphones designed specifically for drums, percussion and bass instruments.
DTP 640 REX The product Thanks to variably controlled dual element technology and fine tuned frequency responses, our flagship among drum microphones, the DTP 640 REX, offers unparalleled and powerful sound that will delight professional drummers and sound engineers alike.
DTP 640 REX Features / Top applications Features ■ Innovative dual-element design (dynamic and back-electret condenser) accurately captures the sharp attack of the beater as well as the round tonalities of the shell for unrivaled realism ■ 3-position switchable "Enhanced Frequency Response" provides various tailored frequency responses on separate channels for maximum creative freedom ■ Frequency response specifically tuned for kick drum applications and bass instruments ■ 3-position switchable pre
DTP 640 REX Using the mic Your mic ① DTP 40 Trs Y-cable: a 5-pin XLR into two 3-pin XLR ② 5-pin XLR jack ③ Electrostatic element ④ Dynamic element ⑤ Recessed slide switch for ‘Enhanced Frequency Response’ ⑥ Recessed slide switch for pre-attenuation level ⑥ ③ ⑤ ④ Dual Element Technology ■ Your DTP 640 REX is equipped with a high quality dynamic element ④ and a condenser element ③ – the dynamic element ensures accurate reproduction of the bass drum kick, while the condenser element optimally captures t
DTP 640 REX Using the mic ‘Enhanced Frequency Response’ – EFR ■ The recessed EFR slide switch ⑤ allows you to select different frequency responses of the two elements. = // = ‘Flat Frequency Response’ – FFR ■ FFR is especially suited for recording bass-heavy instruments and for placing the DTP 640 REX outside the kick drum. With the FFR switch setting, both elements offer a relatively neutral reproduction of sound.
DTP 640 REX Tech data Tech graph Dimensions 3 dB / unit 71 dB ref. 1 V / Pa 158 127 FFR (Condenser) 3 dB / unit dB ref.
DTP 640 REX Tech data 3dB / unit dB ref. 1 V / Pa Dynamic EFR (Dynamic) 3dB / unit dB ref. 1 V / Pa Dual EFR (Dynamic) 3 dB / unit dB ref.
DTP 640 REX Tech data Tech data ■ Acoustical operating principle: ■ Transducer Ø (dynamic): ■ Transducer Ø (condenser): ■ ■ ■ ■ ■ Directional pattern: Frequency range: EFR, ‘Enhanced Frequency Response’ settings: dynamic, moving coil condenser, permanently polarized 31,7 mm 1,25 inch 22,4 mm 0,88 inch cardioids, condenser and dynamic 20 … 16.000 Hz, dynamic, depending on EFR setting 20 … 20.
DTP 640 REX Accessories Accessories DTP 40 Trs DTP 40 Lb 10
DTP 640 REX Cautions Cautions ■ The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress ■ To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. and force. ■ Keep this product out of the reach of children. ■ Do not use force on the switch or cable of the microphone.
DTP 640 REX Warranty Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
DTP 640 REX Regulatory information LEWITT GmbH declares under its sole responsibility that DTP 640 REX WEEE note: Electronic waste has to be collected separately. Please bring complies with the European directive 2004/108/EC. The product has this device to a local recycling center at the end of its life time.
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.