. DTP 340 TT
DTP 340 TT Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. With its DTP series, LEWITT introduces a complete family of cutting-edge, high-performance wired dynamic microphones designed specifically for drums, percussion and bass instruments.
DTP 340 TT The product With the DTP 340 TT LEWITT introduces consistently high-performing wired dynamic microphones specifically designed to accurately capture the sound of drums and percussion instruments providing a maximum of acoustic presence and clarity in live sound applications. Even in high sound pressure level applications, DTP 340 TT reproduces instrumental sounds with sonic detail and character. The super-cardioid polar pattern ensures that side and rear sounds are effectively rejected.
DTP 340 TT Features / Top applications Features ·Tailored frequency response for powerful yet smooth and natural sound on percussion instruments ·Uniform supercardioid pickup pattern ensures high gain before feedback and maximum isolation of the desired sound source ·Solid full-metal, die-cast body suited for rough daily touring routine ·Highly durable steel mesh grille to prevent wear and abuse ·Corrosion-resistant gold-plated 3-pin XLR output connector ·Comes in a cardboard box with foam layers, includi
DTP 340 TT Tech data Tech graph 5 dB / unit dB ref.
DTP 340 TT Tech data 41 94 Dimensions Tech data ·Acoustical operating principle: ·Directional pattern: ·Frequency range: ·Sensitivity: ·Rated impedance: ·Connector: ·Dimensions: ·Net weight: dynamic, moving coil super-cardioid 40 ... 16.000 Hz 1,4 mV / Pa (-57 dBV) < 500 ohms gold plated 3-pin XLR 41 dia. x 94 mm 1,6 dia. x 3,7 inch 165 g 5,82 oz.
DTP 340 TT Accessories Accessories DTP 40 Lb DTP 40 Mts DTP 40 Mt 07
DTP 340 TT Cautions Cautions ·The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. ·To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. ·Keep this product out of the reach of children. ·Do not use force on the switch or cable of the microphone. ·When disconnecting the microphone cable, grasp the connector and do not pull the cable.
DTP 340 TT Warranty Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
DTP 340 TT Regulatory information LEWITT GmbH declares under its sole responsibility that DTP 340 TT complies with the European directive 2004/108/EC. The product has been tested according to harmonized European standards: EN 55013:2001+A1:2003+A2:2006 EN 55020:2007 EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Product testing was carried out by TIMCO Engineering Inc., notified body number 1177. WEEE note: Electronic waste has to be collected separately.
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.
