UNRIVALED VERSATILITY The New Digital RECORDING Multi-Tool Made for iPhone 5, iPhone 5s, iPhone 5c, iPad (4th generation), iPad Air, iPad mini, iPod touch (5th generation) // DGT 650 User Manual 1
// Index Intro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
// Intro Thank you for choosing a LEWITT DGT 650! In brief: It’s the most versatile USB microphone on the market. It’s compatible with Windows, Mac and even iOS devices. It can be used to record vocals, instruments, ambient sound, samples, podcasts and more, both mono with a cardioid polar pattern and stereo thanks to its XY capsule arrangement. Plug in and record your guitar, synthesizer, mixing desk or any other line output-equipped device via the breakout box.
// Features // Top applications // XY stereo capsule arrangement for authentic recordings of any acoustic event // Switchable to cardioid polar pattern // Hi-Z stereo line-in (6.
// Recording Modes We’ve built four different recording modes into your DGT 650 to make it the most versatile USB microphone in the world, serving you as a true digital multi-tool. Since we’ll need to refer to those different modes later on in this user manual (and because we think they’re really cool), we’d like to briefly introduce them to you here: XY Stereo Mode // Two cardioid capsules with 90° opening for XY stereo recording.
// Setup Connect the breakout box to the lockable hi-speed 18-pin data connector (11) of the microphone, then connect the USB cable to the computer or the lightning connector (sold separately) to your iOS device. If you need to extend the USB cable, be sure to use a HI-SPEED-compatible USB extension cord. We do not recommend the use of USB hubs, but if you need to, only use a powered hub or use the dedicated charging port to power the DGT 650. OS X (10.
// User Interface Input indicator // Displays active recording mode a // Stereo Mode b // Cardioid Mode c // Singer/Songwriter Mode d // Stereo Line-In Mode a b c d Monitoring modes // Mix the output signal of your device with the input signal of your microphone – simply put: hear the playback and your voice at the same time ...
LED Graph // Displays a value for some settings like headphone gain, input gain, and others. possible to charge the microphone by connecting the dedicated charging port to a PC’s USB port, but there’s no need to do so, since the DGT 650 will then be charged via the data connection. I/O Gain // Input and output gain settings Battery Status // Indicates whether the device is being powered by the internal battery . Jog Dial // Push and turn to change settings.
// Operating the microphone The following will walk you through all the settings of your DGT 650. Standard Mode // This is the default state of the device when you power it on ( is illuminated white). Settings Mode // This is where you can change all the settings on your DGT 650 including recording modes, monitoring options, high-pass filters, pre-attenuation and gain. The illuminated LEWITT logo will turn off as to switch from setting to setting and soon as the microphone switches to Settings Mode.
Cardioid Mode selected // Gain L R will be lit. Rotate the jog dial to change the gain. Singer/Songwriter Mode selected // Gain L will be lit first. This lets you set the gain for the left channel – in this mode, it’s the cardioid microphone. Press the jog dial; Gain R will now be lit. This lets you change the gain of the right channel – in this mode, it’s the line input. Stereo Line Mode selected // Gain L R will be lit first. This lets you change the left and right-channel gain settings together.
// Tech Data // Microphone Acoustical operating principle // pressure gradient transducer, permanently polarized, XY-stereo Transducer Ø // 2 x 17 mm / 0.67 inch Polar pattern // cardioid, XY-stereo Frequency range // 20 ... 20,000 Hz Dynamic range of mic. Amp. // 110 dB-A Pre-attenuation pad // 10 dB 20 dB switchable Bass cut filter slope // 12 dB / octave at 80 Hz 12 dB / octave at 160 Hz 12 // General Resolution // 24 Bit Sample rates // 44.
Dimensions // 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 inch Net weight // 310 g, 10.9 oz // Sensitivity, SPL, Self-noise 0 dB gain, no attenuators // Sensitivity: -45.6 dBFS Limiting spl: 140 dB Self-noise: 31.6 dB, 29.2 dB (A) 10 dB gain, no attenuators // Sensitivity: -35.6 dBFS Limiting spl: 130 dB Self-noise: 25 dB, 21 dB (A) 20 dB gain, no attenuators // Sensitivity: -25.6 dBFS Limiting spl: 120 dB Self-noise: 24.9 dB, 19.6 dB (A) 30 dB gain, no attenuators // Sensitivity: -15.
// Saftey Guidelines // The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. // To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. // Keep this product out of the reach of children. // Do not use force on the switch or cable of the microphone. // When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
// Regulatory Information LEWITT GmbH declares under its sole responsibility that DGT 650 complies with the European directive 2004/108/EC and 2006/95/EC. The product has been tested according to harmonized European standards: EN 55022: 2010 EN 55024: 2010 EN 61000-3-2: 2006 + A2: 2009 EN 61000-3-3: 2008 EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 Product testing was carried out by SEM. Test Compliance Service Co., Ltd. notified body number SEM11124587 / SEM11126875.