User Manual

ManualsBrandsLeviton ManualsAccessories & Supplies4-Outlets 7-Feet Cord Length Medical Grade Surge Protective Power Strip, 20-Amp, 125-volt

Leviton’s family of medical-grade power strips are

designed explicitly for use in health care facilities,

including patient care areas as deﬁned by NEC (2011)

Article 517. These devices also satisfy electrical safety

requirements speciﬁed in NFPA 99 (2012): Health Care

Facilities Code, allowing facility managers to ensure that

their facilities are compliant with this safety regulation.

Features & Beneﬁts:

n Available in 2, 4 and 6 outlet conﬁgurations

n Choice of 7’ or 15’ AC power cord with molded

right-angle hospital grade plug

n All outlets are hospital grade, ensuring dependable

performance

n Surge-protective models are UL 1449 3rd edition

compliant, providing the ultimate protection against

voltage surges that can damage or diminish the

performance of sensitive electronic equipment

n Heavy duty steel construction withstands the

rigors of demanding environments

n Built-in overload protection shuts o the strip in case

of excess power draw, and can be returned to service

with the simple push of a button

n UL 60601-1, UL 1363A, and UL 60950-1 compliant

to meet all major safety regulations required for

health care facilities

n Easily accommodates surface mounting and IV pole

mounting with the use of the mounting bracket

n NAFTA Compliant

n Flying leads available on cords up to 15’ long

n Locking safety covers are splash-resistant and protect

from incidental contact with unused outlets

n Indicator lights provide visual conﬁrmation of power

and surge protection (where applicable)

n For surge protective strips, optional audible alarm

for protection status available (special order – contact

Leviton sales representative for details)

n LIMITED LIFETIME WARRANTY

Medical Grade Power Strips

For use in Patient Care Areas

of Health Care Facilities

Conforms to UL 60601-1,

UL 60950-1 and UL 1363A

Product Bulletin for

Medical Grade Power Strips

Summary of content (6 pages)

PAGE 1
Product Bulletin for Medical Grade Power Strips Medical Grade Power Strips For use in Patient Care Areas of Health Care Facilities Conforms to UL 60601-1, UL 60950-1 and UL 1363A Leviton’s family of medical-grade power strips are designed explicitly for use in health care facilities, including patient care areas as defined by NEC (2011) Article 517.
PAGE 2
Patient Care Areas As defined in NFPA 99 – 2012 Edition Patient Care Vicinity (Depicted at right) A space, within a location intended for examination and treatment of patients, extending 6 feet (1.8 m) beyond the normal location of the bed, chair, table, treadmill, or other device that supports the patient during examination and treatment and extending vertically 7.5 feet (2.3 m) above the floor. Patient Care Room Any room of a health care facility wherein patients are intended to be examined or treated.
PAGE 3
meter Leviton’s Medical Grade Strips may be used in ALL types of Patient Care Rooms, both within and beyond the Patient Care Vicinity.
PAGE 4
What is a Medical Grade Power Strip? Applicable Codes & Standards It is a power strip for use with medical equipment and with medical approval under the UL guidelines. They are intended for use inside Patient Care Areas and specifically within the 6 foot perimeter of the patient, known as the Patient Care Vicinity.
PAGE 5
Specifications Medical Grade Power Strips Catalog Number Surge Protective Medical Grade Power Strips 5302M-1N7 5304M-1N7 5306M-1N7 5302M-1N5 5304M-1N5 5306M-1N5 5302M-2N7 5304M-2N7 5306M-2N7 5302M-2N5 5304M-2N5 5306M-2N5 15A (12A max 20A (16A max Electrical Specifications Current Voltage Frequency continuous load) continuous load) 125V 60Hz 125V 60Hz <100μA Maximum Leakage Current Material Specifications #14/3 SJT #12/3 SJT Powder Coated Steel (18ga)* Polypropylene Mechanical Specifications NEM
PAGE 6
Mounting Bracket for Medical Grade Power Strips Compatible with Leviton medical grade power strips, durable powder coated aluminum, adjustable mounting clamps fit any diameter from .875” to 1.