STEP 7 Install Complete NOTE: The INSTALL CHECKLIST screen will appear with the selection box around STEP 7 - Install Complete when you save your security selection. Press the center button to receive your confirmation that the INSTALL CHECKLIST is now complete. Press the center button again to start using the RZCPG. The HOME screen of the RZCPG will be displayed. x1 INSTALL CHECKLIST 3. Update Controller 4. Create Areas 5. Set Associations 6. Security 7.
MAIN MENU SCREEN Pressing the right soft key while on the HOME screen will bring up the MAIN MENU screen where you can navigate through the various selections to edit or change settings. x1 x1 MAIN MENU MAIN MENU 1. Device List 2. "Who Is" 3. Area 4. Profile 5. Events 3. Area 4. Profile 5. Events 6. Settings 7. System Setup Home Back Home Back DEVICE LIST Selecting 1.
AREA Selecting 3. Area from the MENU screen will bring you to the AREA screen. You can create a new area, rename an existing area, modify devices in an area or delete an area (refer to Step 4 of INSTALLATION CHECKLIST - Create Areas pg. 9).
x1 12:00 PM Mon 05.01.200 6 Default Profile x1 Default Profile 1 ON 1 ON 2 ON 2 ON 3 ON 3 ON 4 ON 4 ON OFF 2 ON OFF 3 ON OFF Selecting Events from the MAIN MENU screen will bring you to the EVENTS screen where you can program up to 64 timed events. An area can be set to MAX, ON/OFF, or a SCENE command for a desired time, a specified recurrence or a value relative to sunrise or sunset. The following explains how to create an event: x1 EVENT With the selection box around <> press the center 1.
x1 Mon 05. 0 1 . 2 0 0 6 Default Profile Stand By 1 ON 2 ON 3 ON 4 ON Menu OFF OFF OFF OFF OFF Default Profile Menu Stand By ON OFF ON OFF 12:00 PM OFF x1 12:00 PM Mon 05.01.2006 Default Profile Stand By OFF OFF Menu x1 12:00 PM Mon 05.01.2006 1 ON 1 ON 2 ON 2 ON 3 ON 3 ON 4 ON 4 ON Menu Stand By Default Profile Default Profile Stand By WEEKENDS, ONE TIME, x1 EVENT TIME MONTHLY, or WEEKLY). Time of Day Press right soft key (Save) to 12:00P complete your choice.
CONTRAST x1 12:00 PM M o n 0 5 . 0 1.200 6 Sets the contrast for your RZCPG LCD screen as follows: 1. Select Contrast. 2. Use the and buttons to adjust 1 the 2percentage of contrast. 3. Press right soft key 3 (Save) to complete. 4 x1 x1 Default Profile 12:00 PM Stand By Mon 05.01.
SECURITY Sets the password and lock level for your RZCPG or System (refer to INSTALLATION CHECKLIST - Security pg. 11). BATTERY LEVEL Displays the battery level and charger status for your RZCPG as follows: 1. Select Battery Level. 2. Battery level will be displayed when charger is OFF. Battery level and temperature will be x1 displayed when charger is 12:00 PM ON. NOTE: Battery icon Mon 05.01.2006 x1 will flash as indicator when charging. 12:00 PM Mon 05.01.
SYSTEM SETUP x1 Selecting 7. System Setup from the MAIN MENU screen SYSTEM SETUP 1. Install Checklist will bring you to the SYSTEM 2. Advanced SETUP screen. Selecting 1. Install Checklist brings you to the Installation Back Home Checklist (refer to pg. 5). NOTE: This feature is not x1 available on secondary remotes. ADVANCED Selecting 2. Advanced will Advanced prompt you to continue with Settings? Advanced Settings. Pressing the right soft key (YES) will NO YES bring you to the ADVANCED screen.
It will optimize the mesh network to ensure overall system routing integrity. 4. Update Controllers (refer to INSTALLATION CHECKLIST - Update Controller pg. 8). 5. Remove Failed Use this option to detect devices that are nonoperational and require removal from the network. Once the list is generated, you will press the center button to select a device to remove. Press the right soft key (YES) to remove the device from the network. 6.
secondary remote will be populated with only the device data of the primary remote (not Areas, Profiles, Events). You can create new Areas, Profiles and Events with your secondary remote. If you wish to duplicate the secondary RZCPG remote with the primary RZCPG remote's application information, use RZCPG Utilities. 7. RZCPG Utilities This feature allows you to duplicate all necessary network data from a primary RZCPG remote into your secondary RZCPG remotes. 1.
to select a device to replace. x1 You will be prompted to FAILED NODE Building Node List prepare the controller to be Complete...65% replaced or to press a button on a slave device to be replaced when prompted. The Cancel button press will occur after you initiate the replacement x1 process by pressing the REPLACE NODE center button on the Bedroom Bathroom RZCPG. After replacement Hall you can name the replacing Room Controller device (refer to TEXT Home EDITOR pg. 6).
HAI SETUP Selecting 3. HAI Setup from the ADVANCED screen will bring you to the HAI SETUP screen. This feature allows for the creation of subscriptions for devices when setting up a PC interface (refer to ViziaRF application guide). x1 HAI SETUP Bedroom Hall Room Controller (3) Back Home RTS DEVICES Selecting 4. RTS Devices from the ADVANCED screen will bring you to the RTS DEVICES screen.
3. Rediscovery PL x1 This feature allows you to REDISCOVERY PL change the power level used -3 DB for network rediscovery (refer to Network Rediscovery +/– to adjust pg. 19). Cancel Save 4. Device Properties (refer to Device Properties pg. 22). 5. Reset x1 Resets your RZCPG back to RESET factory default and erases any ALL DATA programmed information from WILL BE the remote. Note: Resetting LOST PROCEED? the RZCPG to factory default does not reset your devices.
