Tailpiece adaptors Motor A B C Bolt Strike plate 2 strike plate screws 2 bolt screws CR2 battery
To enable HomeKit, scan this code during the installation steps in the Level app: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more information on FCC compliance, please go to www.level.
Visit www.level.co/install for more information and tips on installing your Level Lock. What you need: Phillips Screwdriver Compatible iOS or Android Device 01 Test your deadbolt. Make sure your current deadbolt throws smoothly without pushing or pulling the door. 02 Disassemble your lock and keep the pieces. Unscrew the lock housing, the deadbolt, and the strike plate. Store the deadbolt and strike plate in the Level box. 03 Install your Level Lock and strike plate.