User's Manual

ManualsBrandsLETSCOM ManualsElectronicsWireless Charger

Wireless Charger User Manual

Model: Super P

Thank you for purchasing our products. This manual addresses the safety

guidelines, warranty and operating instructions. Please review this manual

thoroughly before operating your device.

SAFETY AND WARRANTY

Important Safety Instructions

• Using an ultra-thick protective phone case or a case with magnetic/iron

plate is not recommended, as it may affect the wireless charging

function.

• Avoid dropping.

• Do not disassemble.

• Do not expose to liquids.

• For the safest and fastest charge, use original or certified cables.

• The product is suitable for moderate climates only.

• The maximum ambient temperature during use of the product must not

exceed 60°C.

• Naked flame sources, such as candles, must not be placed on the

product.

• If you want to clean the product, use only with dry clothes or a brush.

Warranty

We strive to build our products with the highest attention to detail and

craftsmanship. However, sometimes there are occurrences of defect.

We are happy to offer a one-year hassle-free warranty to all our

products as we continue to make amazing products. Please contact us if

you have any questions about our devices.

Summary of content (5 pages)

PAGE 1
Wireless Charger User Manual Model: Super P Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device. SAFETY AND WARRANTY Important Safety Instructions • Using an ultra-thick protective phone case or a case with magnetic/iron plate is not recommended, as it may affect the wireless charging function. • Avoid dropping. • Do not disassemble. • Do not expose to liquids.
PAGE 2
Package Contents • 1 × Wireless Charger • 1 × USB-C Charging Cable • 1 × User Manual At a Glance LED indicator Charging area USB-C input port Using the Wireless Charger 1. Plug the USB-C cable into an AC USB adapter (not included) or a charging USB port. Connect the other end of the USB-C cable to the wireless charger. The indicator will turn red.
PAGE 3
2. Place a supported mobile device in the center of the charging surface. 3. The indicator stays blue. You can check the charging icon displayed on the mobile device’s screen for the charging status. 4. When the mobile device is fully charged, remove it from the wireless charger. Notes: • For some Qi-compatible devices, you may need to buy a Qi-compatible receiver (not included) separately to activate the wireless charging function.
PAGE 4
• The wireless charger supports fast wireless charging. To begin fast wireless charging, place a mobile device that supports fast wireless charging on the wireless charger. Quick charge 2.0 / 3.0 wall adapter (not included) is required for fast wireless charging.
PAGE 5
FCC ID：2AR5E-SUPERP NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.