Smart Watch User Manual ID205 Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
Table of Contents English Version Getting Started ...........................................................1 What’s in the box............................................................1 What’s in this Document.................................................1 Setting up Your Watch..............................................2 Charging your watch.......................................................2 Disassembling / Assembling Your Watch.......................3 Wearing Your Watch.....................
7.3 Women’s Health Tracking......................................20 7.4 Sedentary Reminder............................................20 Basic Specifications.................................................21 FAQs...............................................................................22 Failure to find the watch when pairing......... ................22 Occasional failure to connect with Bluetooth................22 Failure to receive SMS/calls notifications.....................
Getting Started What s in the box What’s Smart Watch User Manual ID205 Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device. Smart watch (ID205 with bands) Charging cable User manual What’s in this document This manual gets you started quickly with setting up your watch.
Setting up Your Watch Charging your watch Please fully charge your watch before initial use. 1. Plug the charging cable into the USB port on your computer or a UL-certified USB wall charger. 2. Place the watch in the charging cradle and push it in until you hear a click. The pins on the charging cradle must align with the gold contacts on the back of the watch. The percent charged appears on the screen.
While the watch charges, press the left/right button to check the battery level. Remove the watch from the power supply once fully charged. USB charger requirement: DC USB port (5V-500mA) Charging time: 2-3 hours Disassembling / Assembling Your Watch Disassembly 1. Turn over the watch and find the quick-release lever. 2. While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it.
3. Repeat on the other side. Assembly 1. Slide the pin (the side opposite the quick-release lever) into the notch on the watch. Attach the wristband with the clasp to the top of the watch. 2. While pressing the quick-release lever inward, slide the other end of the wristband into place.
3. When both ends of the pin are inserted, release the quick-release lever. Wearing Your Watch All-day wear and exercise For all-day wear when you’re not exercising, wear the device on your wrist horizontally, a finger’s width below your wrist bone and lying flat, the same way you would put on a watch. For optimized heart rate tracking, keep these tips in mind: 1. Experiment with wearing the watch higher on your wrist during exercise.
2. Do not wear your watch too tight. A tight band restricts blood flow, potentially affecting the heart rate signal. This being said, the watch should also be slightly tighter (snug but not constricting) during exercise than during all-day wear. Using Your Watch App Installation Use the watch with our customized VeryFitPro app. You can download VeryFitPro from Apple Store/Google Play or scan the QR codes below to download.
Notes: The VeryFitPro app is only compatible with smartphones, not tablets or PCs. Smartphone operating system should be iOS 8.0 / Android 4.4 or higher; Bluetooth version should be 4.0 or higher. Smart Phone System Requirements iOS 8.0 & higher Android 4.4 & higher Bluetooth 4.
App Interfaces Mainpage (Swipe down the page to sync data from the watch to your phone) Details -8-
Device User -9-
Pairing the Watch with Your Phone Please pair the watch with your phone in the VeryFitPro app, NOT in the Bluetooth settings of your phone. Pair the watch with your smartphone in the VeryFitPro app iOS Do NOT pair the watch with your smartphone in your phone’s Bluetooth settings Android 1. Enable the Bluetooth of your smartphone. 2. Open the VeryFitPro app on your smartphone and go to the "Device" page, tap "Bind Device", then your smartphone starts searching devices. 3.
Ř ř Ś Notes: automatically search and reconnect itself if the connection is lost or when Bluetooth is restarted after manual disconnection. the watch will be reset, and the information on the app will be cleared. Please do not unbind the connection unless there is an issue that will require a reset.
Getting to Know Your Watch Button Functions Press and hold the left button to enter the sports mode. (you can define a specific sports mode in the function list of the ! # Press the right button to return to the previous interface Press and hold the right button to turn on the watch. Watch Interfaces This is a touch screen; swipe the screen to go to different interfaces, and tap to enter the function. The home screen is the clock.
Notice bar Function list Status bar Data bar fig. 1 After the watch is bound to the app, the home screen will display the time and date as shown in fig. 1. You can customize the home screen by following the steps below: 1) Tap and hold the home screen. 2) Swipe down to choose one and tap to confirm.
Home Screen (default) Tap the screen to switch between steps, distance, and calories. Contents displayed may be different according to the home screen you choose. Steps Distance Calories Wake a Dimmed Screen To conserve power, the watch has a standby mode in which the screen turns off. To wake the screen, turn your wrist towards you or press the left/right button. Function Introduction Tracks your exercise data in up to 14 sports modes.
Control the music playing of your smartphone. Timing and countdown. Some basic settings of the watch. Your recent sports record. 1. Tracking Sports The watch tracks your exercise data in up to 14 sports modes. You can set up to 8 different sports modes from among 14 sports modes in the app to display on the watch $ % ' * + ' # Start a sport ' Tap the sport you choose to start.
End the sport < = Exercise data is displayed after the exercise has ended. Swipe down the screen to flip through exercise data: Data of exercises less than 1 minute will not be saved. Notes: You can also use your phone’s GPS to track your pace and distance during walks, hikes, runs or rides while mapping out your run or walk on your phone. In the app, tap will pop up.
2. Monitoring Heart Rate The watch tracks your real-time heart rate automatically and continuously. You can also view your detailed heart rate data on the watch screen or in the app. Notes: on the upper position of your wrist and a bit tighter than usual when you exercise. In addition, complete your profile in the app. + > monitoring heart rate all day automatically.
4. Setting Alarms 1) Go to the "Device" page in the app and tap "Alarm Alert". 2) Tap "+" to add an alarm. 3) Tap the alarm, then set the alarm type, repeat type and time. Z# = ' You can tap the alarm you set on the watch screen to enable/disable the alarm. 5. Controlling Phone Music 1) Go to the "Device" page in the app and tap "Music Control". [# \ = ' 3) Tap "Music Controller" on the watch screen to enter the function and control t
6. Tracking Sleep The watch automatically tracks your sleep duration (Deep Sleep, Light Sleep, and Wake-sleep) and consistency with a comprehensive analysis of sleep quality data so you can see your sleep trends and improve your routine. You can check your detailed sleep data in the app. 7. More Functions 7.1 Call Notification When there is an incoming call, the watch vibrates to alert you, and the screen displays the caller ID. Tap on the watch screen to reject the call.
7.2 Message Notification When messages (SMS, Facebook, WhatsApp, Twitter, Instagram, Facebook Messenger, LinkedIn, Email, Mail, Calendar, and more) come in, the watch vibrates to alert you, and the screen displays the message content. Notes: > + $ % ' > + + # messages be notified.
Basic Specifications Model No.: ID205 Sync: Bluetooth 4.0 Screen: 1.3" TFT LCD Battery Capacity: 210mAh Working Voltage: 3.8V Working Temperature: -10℃~ 40℃ Weight: 1.
FAQs Failure to find the watch when pairing 1. Make sure your smartphone’s Bluetooth is enabled and your smartphone’s system meets the requirements of Android 4.4 or higher, iOS 8.0 or higher, and Bluetooth 4.0 or higher. 2. Make sure the distance between your smartphone and the watch does not exceed 0.5 meters and that Bluetooth communication is also within range (10 meters max). 3. Make sure your watch has enough battery life. If there is still a problem after being fully charged, please contact us.
Failure to connect to smartphone The watch will disconnect from your smartphone in the following cases: 1. Smartphone Bluetooth is off or exceeds the Bluetooth connection range (the maximum Bluetooth connection range is 10 meters and can easily be reduced by walls, furniture, etc.) 2. The VeryFitPro app is closed on the phone. (This can occur automatically under certain circumstances.) To reconnect the watch to your smartphone, please kindly take the following steps: 1.
Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty on all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices. Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly.
Do not leave your watch near open flames such as cooking stoves, candles, or fireplaces. This product is NOT a toy – never allow children or pets to play with this product. Always store the product out of the reach of children. The devices themselves or the many small parts they contain may cause choking if ingested. Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard.
% > ' ' non-user-replaceable battery. % > J ' explosion, or other hazards. Health Warnings ' { device, consult your physician before using a heart rate monitor. flashes occasionally. Consult your physician if you have epilepsy or are sensitive to flashing lights.
{ movements and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including step, sleep, distance, heart rate, and calorie data. ' } more likely to experience skin irritation or allergies from a wearable device.
