LenoxxElectronics@LenoxxAustralia www.lenoxx.com.
PRODUCT FEATURES - 33/45/78 RPM SELECTABLE TURNTABLE AUTO-RETURN TONE-ARM BELT DRIVEN SYSTEM TURNTABLE PLATTER WITH STROB DOTS +/- 10% PITCH CONTROL DIRECT USB/SD RECORDING FOR TURNTABLE, AUX IN & FM RADIO AUX IN FOR CONNECTION OF OTHER DEVICE (EG.
CAUTION: THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. PRECAUTIONS FOR USE INSTALLATION UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN MADE. DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION. CONNECTION 1. 2. PLUG THE EXTERNAL POWER ADAPTOR INTO THE EXTENERNAL POWER SOCKET.
FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL. TIMER FUNCTION 1. PRESS THE POWER BUTTON TILL THE STANDBY INDICATOR LIGHT OFF. UNIT IS TURNING FROM STANDBY MODE TO OPERATION MODE. 2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME MINUTES FROM 90>80>70…..>10 OFF. 3. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.
PHONO & ENCODING NOTED: - INSTALL THE DUST COVER INTO HINGE ON THE UPPER CABINET. - SET THE TURNTABLE PLATTER ONTO THE CENTER SPINDLE. - ATTACH THE DRIVE BELT: POSITION THE BELT ON THE MOTOR PULLY, THE DRIVE BELT IS TIGHTENED UNDER THE TURNTABLE PLATTER. - - - PRESS FUNCTION BUTTON TO SELECT “PHONO” ON DISPLAY. REMOVE THE STYLUS PROTECTOR. BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM REST PART BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
- ROW FOR 45RPM. SUITABLE STROBE LIGHT WILL BE ON DURING PHONO MODE AND WILL LIGHT ON THE STROB DOTS. SUITABLE DOTS WILL KEEP STABLIZED IN SIGHT IF THE SPEED IS CORRECT. ADJUST SPEED BY PITCH CONTROL SLIDER (+/-10%). USE THE 45 RPM ADAPTOR IF REQUIRED. ADJUST THE VOLUME TO THE DESIRED LEVEL. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING, TONE ARM WILL AUTOMATICALLY RETURN TO THE TONE ARM REST PART.
SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016). 5. THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC) AUTOMATICALLY. - PLAY / PAUSE BUTTON PRESS THE “PLAY/PAUSE” - STOP BUTTON PRESS STOP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN 女 TO SELECT FILE FORWARD OR BACKWARD. - SKIP UP / SKIP DOWN BUTTON DURING MP3/WMA PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT FILE.
2. PRESS ALBUM DOWN OR ALBUM UP TO SEARCH DESIRED FOLDER FOR COPYING. 3. PRESS REC BUTTON, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. TO SELECT “DIR” ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM. 4. USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 5. WHEN THE USB OR SD ICON STOPS FLASHING, IT MEANS THAT THE FOLDER COPYING IS COMPLETED. III) COPY ALL TRACK 1.INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN “USB” OR “CARD” MODE & SET AT STOP MODE AFTER UNIT READING. 2.
SILENT PART THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING. NOTE FOR AUTO SPLIT: DURING USB/SD RECORDING FROM TURNTABLE, WHEN THE UNIT HAS DETECTED ANY PARTICULAR SILENT PART, THE TURNTABLE WILL STOP MOMENTARILY. THE TURNTABLE WILL RESUME OPERATION ONCE THE USB/SD DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED. LOUDNESS DURING MUSIC PLAYBACK, PRESS LOUDNESS BUTTON TO SWITCH ON OR OFF BASS ENHANCEMENT. WHEN DISPLAY SHOWS “LOUD”, IT MEANS BASS ENHACEMENT ACTIVATED.
REMOTE CONTROL BATTERY INSTALLATION THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION BUTTON DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 STANDBY: TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE. PRESET/ALBUM DN: PERFORM SAME FUNCTION AS “ALBUM DOWN / PRESET DOWN” BUTTON (16) ON THE UNIT. PRESET/ALBUM UP: PERFORM SAME FUNCTION AS “ALBUM UP / PRESET UP” BUTTON (17) ON THE UNIT. TIMER / SLEEP: PERFORM SAME FUNCTION AS “SLEEP / TIMER” BUTTON (5) ON THE UNIT.
