AM/FM RADIO CASSETTE RECORDER MODEL CT-995 OPERATING INSTRUCTIONS CASSETTE PLAYER/RECORDER AM/FM RADIO RECEIVER ONE-TOUCH CASSETTE RECORDING AUTOMATIC LEVEL CONTROL ROTARY VOLUME CONTROL BUILT-IN CONDENSER MICROPHONE 2 WAY POWER - AC/DC FULL SIZE FOLDING HANDLE PLEASE READ CAREFULLY BEFORE USE IB-CT995(NL)-WM-E-011004 IB-CT995(NL)-WM-E-011004.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries.
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. Battery compartment To a wall outlet NOTE: BATTERY DOOR One blade of plug & outlet is wider. TIP The plug of the AC power cord is polarized and only fits one way into the wall outlet. If this plug does not match your outlet, do not force it. Reverse it and try again. 1. Connecting the AC Power Cord Open the BATTERY COMPARTMENT DOOR, stretch the AC power cord out, and insert the AC PLUG into the wall outlet. 2.
LISTENING TO THE RADIO 1&4 3 2 Connect the supplied AC power cord or batteries (see page 4). 1 2 RADIO OFF TAPE FM Slide the FUNCTION SWITCH to AM or FM position. AM TUNING Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. 3 4 Adjust the volume level by rotating the VOLUME control. RADIO OFF TAPE FM To turn off the Radio, slide the FUNCTION switch to TAPE (RADIO OFF) position.
PLAYING A TAPE 1 3 2 Connect the supplied AC power cord or batteries (see page 4). 1 2 RADIO OFF TAPE FM STOP/EJECT AM Slide the FUNCTION switch to TAPE (RADIO OFF) position. Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door. E M P TY R EE L FU LL R EE L INSERT TAPE THIS WAY FULL REEL ON RIGHT 3 PLAY Press the PLAY button. The player turns on and starts playing. 6 IB-CT995(NL)-WM-E-011004.
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR VOLUME CONTROL PAUSE STOP/ EJECT TIP When the tape finishes playing that side of the tape, the set will stop and the PLAY button will pop up. To hear the other side, flip the tape over, then insert and press PLAY, or press REWIND then PLAY to hear the same song again.
RECORDING ON A TAPE 2 3 1 MICROPHONE Connect the supplied AC power cord or batteries (see page 4). 1 2 RADIO OFF TAPE RADIO OFF TAPE 3 Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM or built-in microphone) you want to record. STOP/EJECT FM FM AM AM RECORD To record from radio, slide the FUNCTION switch to AM or FM position, and tune into the station you want.
USE THESE BUTTONS ADDITIONAL OPERATIONS FOR FUNCTION SWITCH PAUSE TIP Adjusting the VOLUME control will not affect the recording level. For best recording effect, use AC power instead of batteries. To erase a recording, just start a new one, and the old recording is automatically replaced. To Press or Adjust Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording.
PRECAUTIONS Notes on Cassette On Safety Should any solid object or liquid fall into the set, disconnect the power, and have it checked by qualified personnel before operating it any further. Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape.
MAINTENANCE Cleaning the Tape Heads Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. After cleaning, insert a tape when the areas cleaned are completely dry. NOTE: In order to see and clean the head, you may have to press PLAY first. Notes for Storing Cassette Tapes 1. Do not put a tape near a magnetic field, such as a TV, or speaker.
TROUBLE SHOOTING Remedy General Problem Connect the AC power cord to a wall outlet securely. Make sure the batteries are inserted The power is not on. correctly and they are fresh. Make sure the FUNCTION switch is in the correct position. Adjust the volume. Unplug the headphone when listening There is no sound. Radio through speaker. The sound is weak or poor quality. The RECORD button does not function/The tape does not play. Tape player The tape does completely.
SPECIFICATION General Description Power source: AC 120V, 60Hz, 6 Watts DC 6V (4 size C batteries) (we recommend alkaline batteries for longer life) Speaker: 3 DYNAMIC Output power: Dimensions: 600mW Width: 11 3/ 4 Depth: 4 Height: 6 1/ 4 Weight: 3 LBs (without batteries) Tape Recorder Section Tape: Standard normal bias cassette tape Frequency response: 70 Hz - 10 kHz Wow & flutter: 0.35% W.R.M.S.