Lenovo TAB 7 Lenovo TB-7504F Lenovo TB-7504X Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 54. First Edition (August 2017) © Copyright Lenovo 2017. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents About this manual........................................iv Trademarks .........................................................55 Safety information.........................................1 General safety....................................................... 2 Electrical safety .................................................... 3 Safety inspection guide....................................... 5 Handling devices that are sensitive to electro‐ static discharge...................................
Lenovo TAB 7 Hardware Maintenance Manual About this manual This manual contains service and reference information for the following Lenovo product: Lenovo TAB 7 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product‐specific section includes service, reference, and product‐specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
Lenovo TAB 7 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
Lenovo TAB 7 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards according to the attachment of non‐Lenovo features or options not covered by this inspection guide.
Lenovo TAB 7 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Lenovo TAB 7 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short‐circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. Certaines batteries de secours contiennent du nickel et du cadmium.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short‐circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Lenovo TAB 7 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez‐les abondamment pendant au moins quinze minutes.
Lenovo TAB 7 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo TAB 7 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD‐ROM drive or a DVD‐ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD‐ROM drive, a DVD‐ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Lenovo TAB 7 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Important notice for replacing a main board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer‐installable. The BIOS and device drivers are posted on the customer support site: http://support.lenovo.com/.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a main board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
Lenovo TAB 7 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • When you replace FRUs, use new nylon-coated screws.
Lenovo TAB 7 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the AC adapter and install the charged battery pack. 7. Make sure that the battery pack supplies power when you turn on the computer.
Lenovo TAB 7 Hardware Maintenance Manual 1.Open the Android Settings screen. To open the Android Settings screen, do either of the following: – – From the main Home screen, touch the Android Settings icon on Lenovo Launch Zone. The Android Settings screen is displayed. Touch the application icon from the action bar and then touch Settings. The Android Settings screen is displayed. 2.Touch About Tablet on the Android Settings screen. 3.
Related service information Related service information This chapter presents the following information: • “Security” on page 23 • “Power management” on page 23 Security Security settings include: SCREEN SECURITY, SIM CARD LOCK (3G version only), PASSWORDS, DEVICE ADMINISTRATION and CREDENTIAL STORAGE. Power management Note: Power management modes are not supported for APM operating system.
Lenovo TAB 7 Hardware Maintenance Manual Lenovo TAB 7 This chapter presents the following product‐specific service references and product‐specific parts information: • “FRU replacement notices” on page 25 • “Removing and replacing an FRU” on page 26 • “Locations” on page 49 • “Parts list” on page 50 24
Lenovo TAB 7 FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon‐coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten. • Each one should be used only once.
Lenovo TAB 7 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 25. 3.
Lenovo TAB 7 1010 Back Cover Figure 1. Removal steps of back cover Open the SIM card slot cover and take out the SIM card tray. Using a disassembly tool, pry open the rear cover in the direction of the arrows, starting from the SIM card slot.
Lenovo TAB 7 Hardware Maintenance Manual Figure 1.
Lenovo TAB 7 1020 Battery DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Back Cover” on page 27 Figure 2. Removal steps of battery Tear off the battery radiation film from the device slowly. Unscrew the three screws on the battery connector bracket and remove it. Step 1 Screw (quantity) Color Torque M1.4*3.0 (3) Silver 0.
Lenovo TAB 7 Hardware Maintenance Manual Figure 2. Removal steps of battery (continued) Disconnect the battery FPC in the direction of the arrow. Peel off and pull out the tear tape along the direction of the battery. Take out the battery.
Lenovo TAB 7 Figure 2.
Lenovo TAB 7 Hardware Maintenance Manual 1030 Sub Board For access, remove this FRU: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 3. Removal steps of sub board Disconnect the ends of the RF cable and remove the RF cable from the routing groove. Unscrew the screw on the sub board and remove the sub board. Step 1 32 Screw (quantity) Color Torque M1.4*3.0 (1) Silver 0.
Lenovo TAB 7 Figure 3.
Lenovo TAB 7 Hardware Maintenance Manual 1040 Main FPC For access, remove this FRU: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 4. Removal steps of main FPC Peel off the mylar on the main FPC connector. Disconnect the connectors on both ends of the main FPC.
Lenovo TAB 7 Figure 4. Removal steps of main FPC (continued) Pull out the FPC in the direction of the arrow.
Lenovo TAB 7 Hardware Maintenance Manual Figure 4. Removal steps of main FPC (continued) Remove the vibrator and MIC from the front cover. Slowly separate the main FPC from the front casing.
Lenovo TAB 7 Figure 4. Removal steps of main FPC (continued) Solder both the vibrator and the MIC off from the main FPC with a soldering iron at a temperature of 330‐350.
Lenovo TAB 7 Hardware Maintenance Manual 1050 Rear Camera For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 5. Removal steps of rear camera Disconnect the rear camera connector and remove the rear camera.
Lenovo TAB 7 Figure 5.
Lenovo TAB 7 Hardware Maintenance Manual 1060 Sidekey For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 6. Removal steps of sidekey Disconnect the sidekey connector and pull out the FPC.
Lenovo TAB 7 Figure 6. Removal steps of sidekey (continued) Remove the sidekey in the direction of the arrow.
Lenovo TAB 7 Hardware Maintenance Manual 1070 Speaker Box For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 Figure 7. Removal steps of speaker box Unscrew the five screws on the speaker box. Step 1 Screw (quantity) Color Torque M1.4*3.0 (5) Silver 0.7N Remove the speaker box in the direction of the arrow.
Lenovo TAB 7 Figure 7.
Lenovo TAB 7 Hardware Maintenance Manual 1080 Main Board Important notices for handling the main board: When handling the main board, bear the following in mind. • Be careful not to drop the main board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • Throughout the process, make sure not to drop or stack the main board.
Lenovo TAB 7 Figure 8. Removal steps of main board (continued) Remove the main board in the direction of the arrow. Remove the sensor rubber.
Lenovo TAB 7 Hardware Maintenance Manual Figure 8.
Lenovo TAB 7 1090 Front Camera For access, remove these FRUs in order: • “1010 Back Cover” on page 27 • “1020 Battery” on page 29 • “1030 Sub Board” on page 32 • “1040 Main FPC” on page 34 • “1050 Rear Camera” on page 38 • “1060 Sidekey” on page 40 • “1070 Speaker Box” on page 42 • “1080 Main Board” on page 44 Figure 9. Removal steps of front camera Disconnect the front camera FPC connector and pull out the FPC.
Lenovo TAB 7 Hardware Maintenance Manual Figure 9.
Lenovo TAB 7 Locations Model Version Lenovo TB‐7504F WLAN Lenovo TB‐7504X WLAN + LTE 1 2 3 4 5 6 5 7 11 8 9 10 1 Front camera 2 Speaker/Receiver 3 Indicator 4 Touch screen 5 Power button 6 Volume buttons 7 Rear camera 8 Micro USB connector 9 Headset connector 10 Card tray 11 Microphone Notes: The WLAN version (Lenovo TB‐7504F) does not have a Nano‐SIM card slot.
Lenovo TAB 7 Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 51 • “AC Adapter” on page 53 • “Screw” on page 53 • “Others” on page 53 Notes: • Each FRU is available for all types or models, unless specific types or models are specified.
Lenovo TAB 7 Overall 9 2 16 15 6 4 8 11 5 14 10 13 3 12 7 1 51
Lenovo TAB 7 Hardware Maintenance Manual Table 1. Parts list—Overall No. FRU FRU no.
Lenovo TAB 7 AC Adapter Table 2. Parts list—AC Adapters FRU FRU no.
Lenovo TAB 7 Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Notices Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development‐level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
Lenovo TAB 7 Hardware Maintenance Manual 56