Lenovo IdeaPad Miix 10 Hardware Maintenance Manual
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 64. First Edition (June. 2013) © Copyright Lenovo 2013. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
Contents About this manual........................................ iv Safety information......................................... 1 General safety................................................. 2 Electrical safety............................................... 3 Safety inspection guide................................... 5 Handling devices that are sensitive to electrostatic discharge..................................... 6 Grounding requirements..................................
About this manual This manual contains service and reference information for the following Lenovo IdeaPad product: Lenovo IdeaPad Miix 10 Use this manual to troubleshoot problems. The manual is divided into the following sections: • The common sections provide general information, guidelines, and safety information required for servicing computers. • The product-specific section includes service, reference, and product-specific parts information.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service an Lenovo IdeaPad Miix 10 computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14 1
IdeaPad Miix 10 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. Do not use such kind of mat to protect yourself from electrical shock.
IdeaPad Miix 10 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage.
Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potential unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards according to the attachment of non-Lenovo IdeaPad features or options not covered by this inspection guide.
IdeaPad Miix 10 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
IdeaPad Miix 10 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or shortcircuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. Certaines batteries de secours contiennent du nickel et du cadmium.
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
IdeaPad Miix 10 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery.
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes.
IdeaPad Miix 10 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
IdeaPad Miix 10 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo IdeaPad computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products.
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
IdeaPad Miix 10 Hardware Maintenance Manual Important service information This chapter presents the following important service information: • “Strategy for replacing FRUs” on page 16 – “Important notice for replacing a system board” on page 17 • “Important information about replacing RoHS compliant FRUs” on page 18 Important: BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site: http://support.lenovo.com.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one.
IdeaPad Miix 10 Hardware Maintenance Manual Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs.
IdeaPad Miix 10 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8.
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Connect the AC adapter. 3. Make sure that power is supplied when you turn on the computer. 4. Turn off the computer. 5. Disconnect the AC adapter. 6. Make sure that the battery pack supplies power when you turn on the computer.
IdeaPad Miix 10 Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack.
Related service information Related service information This chapter presents the following information: • “Restoring the factory contents by using Recovery system” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery system Restore of factory default The Lenovo IdeaPad Miix 10 computers come with pre-installed Recovery system.
IdeaPad Miix 10 Hardware Maintenance Manual When you use the recovery discs to boot your computer, the system will enter the user interface for system recovery automatically. Please follow the prompt to insert the backup discs to complete the whole recovery process. Note: The recovery process might take up to 2 hours. Passwords As many as two passwords may be needed for any Lenovo IdeaPad computer: the power-on password (POP) and the supervisor password (SVP).
Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. To end screen blank mode and resume normal operation, press any key.
IdeaPad Miix 10 Hardware Maintenance Manual Lenovo IdeaPad Miix 10 This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 26 • “Function key combinations” on page 28 • “FRU replacement notices” on page 29 • “Removing and replacing an FRU” on page 30 • “Locations” on page 54 • “Parts list” on page 57 Specifications The following table lists the specifications of the Lenovo IdeaPad Miix 10 : Table 1.
Lenovo IdeaPad Miix 10 Table 1. Specifications (continued) Feature Description Touch pad Integrated camera Battery AC adapter Pre-installed operating system • Multi-touch type • 1.
IdeaPad Miix 10 Hardware Maintenance Manual Function key combinations The following table shows the function of each combination of function key. Table 2. Function keys : 28 Mutes/unmutes the sound. : Decreases the volume level. : Increases the volume level. : Closes the currently active window. : Refreshes the desktop or the currently active window. : Displays the Settings charm. : Enables/disables Airplane mode. : Displays all currently active apps.
Lenovo IdeaPad Miix 10 FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten.
IdeaPad Miix 10 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 29. 3.
Lenovo IdeaPad Miix 10 1010 LCD cover Figure 1. Removal step of LCD cover Turn the pad over, open the SIM card door 1, then remove one screw 2. 1 2 Remove the LCD cover in the direction shown by arrow 3. 3 Step 2 Screw (quantity) Color Torque M1.4 × 2.3, Cover to Bezel (IO Door) (1) Black 0.9+/-0.
IdeaPad Miix 10 Hardware Maintenance Manual 1020 Battery pack For access, remove this FRU: • “1010 LCD cover” on page 31 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 2. Removal steps of battery pack Disconnect the battery connector in the direction shown by arrow 1, then remove the five screws 2. 2 2 2 1 Step 2 32 Screw (quantity) Color Torque M1.6 × 2.5, Battery to Bezel (5) Sliver 1.85+/-0.
Lenovo IdeaPad Miix 10 Figure 2. Removal steps of battery pack (continued) Remove the battery pack in the direction shown by arrow 3. 3 When installing: Make sure the battery pack connector is attached firmly.
IdeaPad Miix 10 Hardware Maintenance Manual 1030 3G card For access, remove these FRU: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 Figure 3. Removal steps of 3G card Disconnect the two 3D card cables (blue, red) 1. Then remove the one screw 2. 2 1 In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 51078891), or pick up the connectors with your fingers and gently unplug them in the direction shown by the arrows.
Lenovo IdeaPad Miix 10 Figure 3. Removal steps of 3G card (continued) Remove the 3G card in the direction shown by arrow 3. 3 Step 2 Screw (quantity) Color Torque M1.6 × 1.8, NGFF to Bezel (1) Black 1.85+/-0.
IdeaPad Miix 10 Hardware Maintenance Manual 1040 Speakers For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 Figure 4. Removal steps of speakers Unplug one speaker connector in the direction shown by arrow 1. Remove the four screws 2. 2 2 1 Step 2 Screw (quantity) Color Torque M1.6 × 2.5, Speaker to Bezel (4) Sliver 1.85+/-0.15kgf*cm When installing: Make sure the speaker connector is attached firmly.
Lenovo IdeaPad Miix 10 Figure 4. Removal steps of speakers (continued) Remove the speakers in the direction shown by arrows 3.
IdeaPad Miix 10 Hardware Maintenance Manual 1050 Audio Board For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 Figure 5. Removal steps of audio board Detach the two FPC connectors in the direction shown by arrows Remove the one screw 3. 1 and 2. 3 1 2 Step 3 Screw (quantity) Color Torque M1.6 × 2.5, Audio Board to Bezel (1) Sliver 1.85+/-0.
Lenovo IdeaPad Miix 10 Figure 5. Removal steps of Audio Board (continued) Remove the audio board in the direction shown by arrow 4. 4 When installing: Make sure the audio board connector is attached firmly.
IdeaPad Miix 10 Hardware Maintenance Manual 1060 Power board For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 Figure 6. Removal steps of Power board Detach the power board connector in the directions shown by arrows 1 and 2. Remove the one screw 3.
Lenovo IdeaPad Miix 10 Figure 6. Removal steps of power board (continued) Remove the power board 4. 4 Step 3 Screw (quantity) Color Torque M1.6 × 2.5, PWR Board to Bezel (1) Sliver 1.85+/-0.15kgf*cm When installing: Make sure the power board connector is attached firmly.
IdeaPad Miix 10 Hardware Maintenance Manual 1070 Docking Board For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 • “1060 Power board” on page 40 Figure 7. Removal steps of Docking Board Detach the docking board connector in the directions shown by arrows 1 and 2 then remove the two screws 3. 3 1 2 Step 3 Screw (quantity) Color M1.6 × 2.
Lenovo IdeaPad Miix 10 1080 Touch Pad Board For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 • “1060 Power board” on page 40 • “1070 Docking Board” on page 42 Figure 8. Removal steps of touch pad board Detach the touch pad board connector in the directions shown by arrows and 2. Remove the two screws 3. 1 3 3 1 2 Step 3 Screw (quantity) Color M1.6 × 2.
IdeaPad Miix 10 Hardware Maintenance Manual Figure 9. Removal steps of touch pad board (continued) Remove the touch pad board in the direction shown by arrow 4. 4 When installing: Make sure that the touch pad board connectors are attached firmly.
Lenovo IdeaPad Miix 10 1090 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • Avoid rough handling of any kind. • In the whole process, make sure not to drop or stack the system board. • If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material.
IdeaPad Miix 10 Hardware Maintenance Manual Figure 9. Removal steps of system board Detach the camera board and LCD cable connectors shown by arrow 1 and 2. Unplug the vibrator board and DC-IN Cable connectors shown by arrow 3. Disconnect antenna GPS (gray) shown by arrow 4, then remove the three screws 5 and three screws 6. 5 1 4 2 6 1 2 3 3 When installing: Make sure that all the connectors are attached firmly. Step 5 6 46 Screw (quantity) Color Torque M1.6 × 1.
Lenovo IdeaPad Miix 10 Figure 9. Removal steps of system board(continued) Turn the system board over as shown by arrow 7 and unplug the WLAN card board connector in the direction shown by arrow 8. Then remove the system board as shown by arrow 9 and remove vibrator board 0 and DC-in board K.
IdeaPad Miix 10 Hardware Maintenance Manual 1100 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 • “1060 Power board” on page 40 • “1070 Docking Board” on page 42 • “1080 Touch Pad Board” on page 43 • “1090 System board” on page 45 Figure 10.
Lenovo IdeaPad Miix 10 Figure 10. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 2.
IdeaPad Miix 10 Hardware Maintenance Manual 1110 Integrated camera For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 • “1060 Power board” on page 40 • “1070 Docking Board” on page 42 • “1100 PCI Express Mini Card for wireless LAN” on page 48 • “1080 Touch Pad Board” on page 43 • “1090 System board” on page 45 • “1100 PCI Express Mini Card for wireless LAN” on page 48
Lenovo IdeaPad Miix 10 1120 Antenna Module For access, remove these FRUs in order: • “1010 LCD cover” on page 31 • “1020 Battery pack” on page 32 • “1030 3G card” on page 34 • “1040 Speakers” on page 36 • “1050 Audio Board” on page 38 • “1060 Power board” on page 40 • “1070 Docking Board” on page 42 • “1100 PCI Express Mini Card for wireless LAN” on page 48 • “1080 Touch Pad Board” on page 43 • “1090 System board” on page 45 • “1100 PCI Express Mini Card for wireless LAN” on page 48 • “1110 Integrated came
IdeaPad Miix 10 Hardware Maintenance Manual Figure 12. Removal steps of antenna module(continued) Remove the 3G antennas in the direction shown by arrow 2. 2 Remove the GPS antenna in the direction shown by arrow 3.
Lenovo IdeaPad Miix 10 Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label: The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
IdeaPad Miix 10 Hardware Maintenance Manual Locations Top view 1 Multi-touch screen 2 Integrated camera 3 Windows button 1 2 3 54
Lenovo IdeaPad Miix 10 Locations Front view 1 Combo audio jack 2 Power button 1 2 55
IdeaPad Miix 10 Hardware Maintenance Manual Bottom view, Left-side and Rear view 1 2 3 4 5 6 7 AC power adapter jack Micro HDMI port SIM card slot (on select models) Micro SD card slot Volume button Speakers Micro USB port 6 7 5 4 3 1 56 2
Lenovo IdeaPad Miix 10 Parts list This section presents the following service parts: • “Overall” on page 58 • “Keyboard” on page 60 • “Miscellaneous parts” on page 61 • “Screws” on page 62 • “AC adapters” on page 63 Notes: • Each FRU is available for all types or models, unless specific types or models are specified.
IdeaPad Miix 10 Hardware Maintenance Manual Overall 1 a 2 3 5 6 4 7 b 8 10 9 11 12 14 13 c 15 16 17 58
Lenovo IdeaPad Miix 10 Table 3. Parts list—Overall (continued) No. FRU FRU no. a-c 1 2 3 4 5 5 5 5 6 7 8 9 10 11 12 13 13 14 14 15 15 16 16 17 17 See “Miscellaneous parts” on page 61. VIXJ0 LCD Module VIXJ0 Antenna Wifi VIXJ0 Antenna 3G VIXJ0 Antenna GPS VIXJ0 MB W8P SSD-64G Wifi VIXJ0 MB W8S SSD-64G Wifi VIXJ0 MB W8P SSD-64G 3G VIXJ0 MB W8S SSD-64G 3G Azw BCM4330 BGN SDIO + UART BT无线网卡 VIXJ0 Power Board W/Cable VIXJ0 DC-IN Cable VIXJ0 Vibrator Board VIXJ0 Camera 1.
IdeaPad Miix 10 Hardware Maintenance Manual Keyboard Table 4. Parts list—Keyboard (continued) 60 Language P/N French Traditional Chinese Belgian English German Arabic U.K.
Lenovo IdeaPad Miix 10 Miscellaneous parts Table 5. Parts list—Miscellaneous parts FRU Cable miscellaneous parts: • (a ) VIXJ0 LCD Cable WO/3G • (a ) VIXJ0 LCD Cable W/3G • (b ) VIXJ0 Camera Cable • (c ) VIXJ0 Touch Panel Cable Note: Italicized letters in parentheses are references to the exploded view in “Overall” on page 58 . P/N 90203079 90203080 90203078 90203081 CRU ID.
IdeaPad Miix 10 Hardware Maintenance Manual Screws Table 6. Parts list—Screws 62 FRU P/N VIXJ0 SCREW 1.4D 2.3L K 2.5D 0.6TNINL+A 90203086 VIXJ0 SCREW 1.6D 1.8L K 4.1D ZK NL+ 90203087 VIXJ0 SCREW 1.6X2L(NL) 90203088 VIXJ0 SCREW 1.6D 2.5L K 3.0D NI NL+0.3T 90203089 CRU ID.
Lenovo IdeaPad Miix 10 AC adapters Table 7. Parts list—Miscellaneous parts FRU P/N Delta ADP-18FW AA 12V1.5A adapter 36200380 Delta ADP-18AW JC 12V1.5A adapter 36200387 Delta ADP-18AW BC 12V1.5A adapter 36200381 Delta ADP-18AW DC 12V1.5A adapter 36200383 Delta ADP-18AW HC 12V1.5A adapter 36200386 Delta ADP-18AW GC 12V1.5A adapter 36200385 Delta ADP-18AW CC 12V1.5A adapter 36200382 CRU ID.
IdeaPad Miix 10 Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Notices Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
