Quick Start Guide

ThinkSystem ST50
Type 7X48 and 7X49
Quick Start
PN: SP47A37122
Printed in China
Your shipping box contains the following items:
 ST50
 Material box, including printed documentation
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase and packing material.
They might be required to receive warranty service.
First glance
Server front view:
5.25-inch drive bay:
1. Drive bay filler
2. Optical disk drive
3. Drive bay adapter with
storage drive
4. Drive bay adapter with
storage drive and slim
optical drive
USB 3.1 Gen1 connector
Drive activity LED
USB 3.1 Gen1 connector
Power button with power
status LED
Note:
Depending on the configuration, the illustration above might differ
slightly from your server.
Server rear view:
Fixed power supply
Line Out connector
Serial connector
Display port connector 2
Display port connector 1
USB 3.1 Gen1
connectors (2)
USB 2.0 connectors (2)
Ethernet connector
PCIe slots (3)
Setting up the System
1. Install the required server components.
2. Install the server into the rack if necessary.
See the Tower-to-rack Conversion Kit Installation Instructions that
was provided with the Tower-to-rack conversion kit.
3. Connect the cables.
4. Power on the server.
5. Configure the system.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/topic/ST50/introduction.html