Lenovo Q24i-10 User Guide
Product numbers 65F3-KAC3-WW 65F3-KCC3-WW First Edition (July 2019) © Copyright Lenovo 2019. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Safety information .................................................................................................................................................iii General Safety guidelines ................................................................................................................................................................................iii TCO Certified....................................................................................................................
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet.
TCO Certified Congratulations! This product is TCO Certified – for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. Shipping contents The product package should include the following items: • Information Flyer • Flat Panel Monitor • Adapter • HDMI Cable • VGA Cable(Optional) • Base • Stand Chapter 1.
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2. Align the stand assembly bracket to the monitor. 3. Insert the bracket towards monitor until it locks in place. Note: "Remove the screws from base before detaching base and stand from the monitor." on page 2-9”.
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see “Adjusting your monitor image” on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Setting up your monitor This section provides information on how to set up your monitor.
Connecting and turning on your monitor 2. Connect the cables according to below icon indication. 3. Connect one end of the HDMI cable to the monitor HDMI connector and the other end to the computer. HDMI Note: Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the "Lenovo HDMI to HDMI Cable OB47070" www.lenovo.com/support/ monitoraccessories. 4.
4. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from HDMI. Note: Please be aware that excessive and/or extreme volume might damage your hearing ability. 5. Insert the Adapter into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered.
6. Power on the monitor and the computer. 7. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://support.lenovo.com/docs/q24i_10. Refer to the “Manually installing the monitor driver” on page 3-5 section to install the driver. Chapter 1.
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
• Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. • General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: • Use adequate lighting for the type of work you are performing.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon 1 Name Description Input Source Switches the video input source. Shift back to previous level when in OSD mode. DDC-CI Press and hold for 10 seconds to enable or disable the DDCCI function. Exit Exit and return to previous level. Volume Increase or decrease the volume.
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Q24i-10 1920x1080 Brightness Contrast DCR DisplayMode Scaling OverDrive InputSignal: VGA To use the controls: to open the main OSD menu. 1. Press 2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments then press to save.
Table 2-1. OSD functions OSD Icon on Main Menu Submenu Brightness Contrast DCR Description Controls and Adjustments Adjusts overall brightness Adjusts difference between light and dark areas Enable dynamic contrast ratio. • Standard • Game DisplayMode • Web • Movie • Picture All input ports Selects type of scaled image. Scaling • Full Screen: expand image to full screen. • Original AR: same aspect ratio with input signal. Basic image setting Respond time enhancement.
Table 2-2. OSD functions OSD Icon on Main Menu Input Source Submenu Controls and Adjustments VGA VGA input source VGA input port HDMI HDM Iinput source HDMI input port Information Shows Model name,Refresh,Firmware,Serial Number . Note: This screen offers information only, and (does) not allow for setting changes. Language Changes languages of menu. Note: The selected language only affects the language of the OSD. It has no effect on any software running on the computer.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-3.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model Q24i-10 Dimensions Stand Image Depth 179.5mm(7.07 in.) Height 434.7mm (17.11 in.) Width 540.5mm (21.28 in.) Tilt Range: -5°~22° Viewable image size 604.7mm (23.8 in.) Maximum height 296.46 mm (11.67 in.) Maximum width 527.04mm (20.
Table 3-1. Monitor specifications for type-model Q24i-10 Speakers Output 3Wx2 Communications VESA DDC CI Horizontal frequency 15 kHz - 85 kHz Vertical frequency 48 Hz - 75 Hz Native Resolution 1920 x 1080 at 60 Hz Operating 0° to 40°C (32° to 104°F) Storage -20° to 60°C (-4° to 140°F) Shipping -20° to 60°C (-4° to 140°F) Operating 10% to 80% non-condensing Storage 5% to 95% non-condensing Shipping 5% to 95% non-condensing Supported Display Modes Temperature Humidity Chapter 3.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The words "Out of Range" are shown on the screen, and the power indicator is flashing white. The system is set to a display mode which is not supported by the monitor.
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power indicator is amber, but there is no image. The video signal cable is loose or disconnected from the system or monitor. Be sure the video cable is connected with the system properly. “Connecting and turning on your monitor” on page 1-4 The monitor brightness and contrast are at the lowest setting. Adjust the brightness and contrast setting on the OSD menu.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 10. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system. 4.
Installing the monitor driver in Windows 10 To use the Plug and Play feature in Microsoft Windows 10, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system. 4. From the Lenovo website http://support.lenovo.
Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: • Images burned onto the screen of a CRT monitor.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the ac power cord for other devices. Appendix B.
