ThinkVision T23i-20 User Guide Machine Types: 61F6
Product numbers C20230FT0 61F6-MAR2-WW First Edition (February 2020) © Copyright Lenovo 2020 LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Safety information........................................................................................................................................... iii General Safety guidelines......................................................................................................................................................................... iii Chapter 1. Getting started...................................................................................................................
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information.
Chapter 1. Getting started 1 This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: y Flat Panel Monitor y Information Flyer y Stand y Base y DP Cable y USB 3.0 A-B Cable y Power Cord USB 3.0 Cable * Notice for use To set up your monitor, please see the illustrations below.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. 35 -5 Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. Chapter 1.
Height Adjustment For height adjustment, user needs to press down or lift up the monitor. 150mm Monitor Pivot - Adjust the screen position before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 30°.) - then rotate clockwise /counterclockwise until the monitor stops at 90°. Chapter 1.
Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image”on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Chapter 1.
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord. Note: The type of plug & Socket shown here are for illustration only. 2. Connect the cables according to below icon indication. 3. For computer in HDMI connecting.
4. For computer in DisplayPort connecting. Note:Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the “ Lenovo DisplayPort to DisplayPort Cable 0A36537 “ www.lenovo.com/ support/monitoraccessories. 5. For computer in Analog Signal Cable connecting. Chapter 1.
6. For computer in USB A-B connecting. * If there are any *,you can consult the comments on page 1-1 7. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from DP, HDMI. Note: The audio output in DP, HDMI modes. Warning note: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltageand therefore the sound pressure level. Chapter 1.
8. Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the other end of the USB cable to an appropriate USB port on your device. Note: The USB downstream port does not provide power while the monitor switch is off. If there are any *,you can consult the comments on page 1-1 9. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.
10. Connect the cables with cable clip. 11. Power on the monitor and the computer. Chapter 1.
12. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website https://pcsupport.lenovo.com/solutions/t23i_20. Refer to the “Manually installing the monitor driver”on page 3-5” section to install the driver. Registering your option Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future.
Chapter 2. Adjusting and using your monitor 2 This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
y Use adequate lighting for the type of work you are performing. y Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. y Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1.
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. T23i-20 Monitor Controls Language English Advanced Settings Menu Time Out 30 Port Settings Menu Horizontal 100 Menu Settings Menu Vertical 0 Exit Transparency 20 Factory Reset Model: T23i-20 Input Signal: HDMI Serial Number: VNA3VGZG Resolution: 1920 x 1080 Refresh Rate: 60Hz Firmware: LG0.1 Color Mode: Reddish To use the controls: 1. Press to open the main OSD menu.
6. The ENERGY STAR option resets all user settings to default values so that the monitor can meet the requirements of Energy Star. Energy Star is an energy saving program for consumer electronics led by the U.S. government.It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and environmental protection.
Table 2-2. OSD functions OSD Icon on Main Menu Monitor Controls Sub menu Brightness Contrast Dynamic Contrast Over Drive Color Mode Advanced Settings Description Adjust bar 0-100 Adjust bar 0-100 Off On Off Normal Extreme sRGB Neutral Reddish Bluish Low Blue Light Custom Aspect Ratio Automatic Full Screen Original AR Normal Reddish Red(0-100) Green(0-100) Blue(0-100) Clock Phase Image Setup (Analog) H. Position V.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: y Apply water or liquid directly to your monitor. y Use solvents or abrasives. y Use flammable cleaning materials to clean your monitor or any other electrical equipment. y Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. y Use any cleaner which contains an anti-static solution or similar additives.
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm. VESA hole Step 5: Attach the LCD display to the wall, following the instructions in the wallmounting kit. For use only with UL/GS Listed Wall Mount Bracket with minimum weight/load:9.96 kg Chapter 2.
Chapter 3. Reference information 3 This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 61F6-MAR2-WW Dimensions Depth 200 mm (7.87 in.) Height 404.34 mm (15.92 in.) Width 521.80 mm (20.54 in.) Size 23.0 in.
Table 3-1. Monitor specifications for type-model 61F6-MAR2-WW Video input (HDMI) Interface HDMI Input signal VESA TMDS (Panel Link™) Horizontal addressability 1920 pixels (max) Vertical addressability 1080 lines (max) Clock frequency 148.5 MHz Interface VGA Input signal Analog Direct Drive, 75 ohm 0.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The words “Out of Range” are shown on the screen, and the power indicator is flashing green. The system is set to a display mode which is not supported by the monitor.
Table 3-2. Troubleshooting Problem Possible cause One or more of the pixels appear discolored. This is a characteristic of the LCD technology and is not an LCD defect. If there are more than five pixels missing, contact the Support Center. Appendix A.”Service and Support”on page A-1 y Fuzzy lines in text or a blurry image. y Image setup has not been optimized. Adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 at 60 Hz.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 10. Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following: 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system. 4.
Installing the monitor driver in Windows 10 To use the Plug and Play feature in Microsoft Windows 10, do the following: 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system. 4. From the Lenovo website https://pcsupport.lenovo.
Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: y Images burned onto the screen of a CRT monitor.
Appendix A. Service and Support A The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.
Country or Region Telephone Number Brazil Calls made from within the Sao Paulo region: 11-3889-8986 Calls made from outside the Sao Paulo region: 0800-701-4815 (Portuguese) Brunei Darussalam Dial 800-1111 (English) Canada 1-800-565-3344 (English, French) Chile 800-361-213 (Spanish) China Technical Support Line: 400-990-8888 (Mandarin) China (Hong Kong S.A.R.) (852) 3516-8977 (Cantonese, English, Mandarin) China (Macau S.A.R.
Country or Region Telephone Number Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.
Country or Region Telephone Number Nicaragua 001-800-220-2282 (Spanish) Norway 8152-1550 (Norwegian) Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English ) Portugal 808-225-115 (Standard Charges Apply) (Portug
Country or Region Telephone Number United States 1-800-426-7378 (English) Uruguay 000-411-005-6649 (Spanish) Venezuela 0-800-100-2011 (Spanish) Vietnam 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) Appendix A.
Appendix B. Notices B Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Recycling information Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacture Do not use the ac power cord for other devices. Appendix B.