P27h-20 Flat Panel Monitor D19270QP1 User’s Guide Machine Type: 61E9
Product Number D19270QP1 61E9-GAR6-WW First Edition (10 2019) © Copyright Lenovo 2019 All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 47 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
Contents Product Number ............................................................................................................................................................................................................. i Contents ......................................................................................................................................................................................................................... ii Safety information...............................
Safety information General Safety guidelines For tips to help you use your computer safety, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. This equipment is not suitable for use in locations where children are likely to be present, avoid hurting your child when machine falling down.
TCO Certified iv © Copyright Lenovo 2019
© Copyright Lenovo 2019 v
Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. The grounding plug is an important safety feature.
Chapter 1 Getting started This User’s Guide contains detailed information on the ThinkVision® P27h-20 Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. ThinkVision P27h-20 supports Lenovo Display Control Center - ThinkColour.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. Height Adjustment After pressing the top of the monitor, you can adjust the height of the monitor.
Monitor Pivot - Adjust the monitor height before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point and it inclines backward at 35°) - Then rotate clockwise or anticlockwise until the monitor stops at 90°. User controls Your monitor has controls at the right side which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image” on page 2-6.
Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Flyer before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord. 2. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor.
4. Connect one end of the USB C-C cable to the USB Type-C connector of the computer, and the other end to the USB Type-C connector on the monitor. Connect one end of the network cable connector to the Ethernet interface of the monitor and the other end to the router. Note: Power output for USB-C: 20V/4.5A, 15V/3A, 9V/3A, 5V/3A. 5. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from DP, TypeC, HDMI, or USB. Note: The audio output in DP, Type-C and HDMI modes. 6.
7. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used.
10. Power on the monitor and the computer. 11. To install the monitor driver, you must download it from Lenovo website， (http://support.lenovo.com/docs/P27h_20) and follow the instructions on page 3-5. Registering your option Thank you for purchasing this Lenovo® product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future.
Chapter 2 Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
Health Administration Prolong exposure to computer screens may cause temporary visual fatigue. Factors including working environment, working habit and posture, screen flicker and blue light contribute to this condition. To minimize visual fatigue certain adjustments can be made on the work stations or using suitable computer screens with features that alleviate eye strain. Environment Visual fatigue is affected by the working environment.
Exercises for the eye: 1. Alternate looking up and looking down while keeping the body and head upright. 2. Slowly roll your eyes to look to the left and right. 3. Roll eyes to look at objects on the upper right corner and then on lower right. Do same thing to look at objects on the upper left and lower left. Exercises for the neck: 1. Relax arm at the side. Bend head forward to slightly stretch the neck. Hold for 5 seconds. 2. Relax arm at the side. Turn head to the right. Hold for 5 seconds.
● Viewing Angle Neck fatigue and pain may result from prolong turning of the head to see objects on the monitor screen. To minimize this, position the monitor directly in front so the head, neck and torso face forward to the screen. It is recommended that monitor should not be more than 35 degrees to the right or left of the head. Monitors should also not be placed too high or too low as this contributes to awkward posture which results to muscle fatigue.
2. Use or to move among the icons. Select icon (Advanced Settings) and press to access this function. 3. Use or to move among the items. Select Scenario Modes and press this function. 4. Select Low Blue Light and press to access to enable/disable Low Blue Light. Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability.
Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1 Direct access controls Icon Control Description DDC-CI Press and hold for 10 seconds to enable or disable the DDC-CI function Input change Switches the video input source. Brightness Direct access to Brightness adjustment. Main menu Open OSD main menu.
Using the On-Screen Display (OSD) controls The settings adjustable with the user controls are viewed through the On-Screen Display (OSD), as shown below. To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using to select that function. Use 3. Press 4. Press and hold 5. or to make adjustments. Press or , then press to save.
Table 2-2 OSD functions OSD Icon on Main Menu Monitor Controls Controls and Submenu Description Brightness Adjusts overall screen brightness Contrast Adjustments Adjusts difference between light and dark areas. Volume Adjust the volume level. Dynamic Contrast Enable dynamic contrast ratio. ● Off ● On Over Drive ● Off ● Normal ● Extreme Adjusts intensity of red, green, and blue. Color Mode Advanced Settings Scenario Modes Aspect Ratio Button Repeat Rate ● sRGB ● BT.
OSD Icon on Main Menu Port Setting Menu Setting Exit Submenu Description Input Signal This monitor can accept video signals through three different connectors. Select digital among OSD controls when you use HDMI/DP/USB-C connector. ● HDMI ● Display Port ● USB-C USB Charging ● Off ● On Smart Power ● Off ● On Super USB-C Charging ● Off ● On DP Select ● DP1.1 ● DP1.2 Daisy Chain ● Off ● On Language Select OSD Language. Note: The language chosen only affects the language of the OSD.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Understanding power management Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table2-4.
Detaching the monitor stand After placing the monitor face down on a clean and soft surface, push the hook of the stand and lift the stand up to remove it from the monitor . Wall Mounting (Optional) Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor face down on a non-abrasive surface on stable flat table. 2. Remove the stand. 3. Attach the mounting bracket from the wall mounting kit to the monitor. 4.
Chapter 3 Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 61E9-GAR6-WW Dimensions Height 576.5 mm (22.7 in.) Depth 208 mm (8.19 in.) Width 613.8 mm (24.17in.
(VESA Standard modes between noted ranges) Temperature Humidity 3-2 P27h-20 Flat Panel Monitor User’s Guide Vertical frequency 50 Hz – 75 Hz Native Resolution 2560 x 1440 at 60 Hz Operating 0° to 40°C (32°F to 104° F) Storage -20° to 60°C (-4°F to 140° F) Shipping -20° to 60°C (-4° F to 140° F) Operating 8% to 80% Storage 5% to 95% Shipping 5% to 95%
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table3-2.Troubleshooting Problem The words” Out of Range” are shown on the screen, and the power indicator is flashing white.
Table3-2.Troubleshooting(continued) Problem Possible cause Suggested action Reference Screen is blank and power indicator is steady amber or flashing white The monitor is in Standby/Suspend mode The power indicator is white, but there is no image. The video signal cable Be sure the video cable is is loose or connected with the system disconnected from the properly. system or monitor. “Connecting and turning on your monitor ” on page 1-4 The power indicator is white, but there is no image.
Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 10. Installing the monitor driver in Windows 7 To install the device driver in Microsoft® Windows 7, do the following: 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then turn on the computer. Allow your computer to boot into Windows 7 operating system. 4.
(such as a desktop). 5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel, then double click the icon of Hardware and Sound, and then click Display. 6. Click the Change the display settings tab. 7. Click the Advanced Settings button. 8. Click the Monitor tab. 9. Click the Properties button. 10. Click the Driver tab. 11. Click Update Driver, then click Browse the computer to find the driver program. 12.
Service information Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: ● Images burned on to the screen of a CRT monitor.
Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo warranty terms. Registering your option Register to receive product service and support updates, as well as free and discounted computer Accessories and content. Go to: http://www.lenovo.
Country or Region Telephone Number China (Macau S.A.R.
Country or Region Telephone Number Panama Lenovo Customer Support Center: 001-866-434(Toll-Free)(Spanish) Peru 0-800-50-866 (OPCION 2) (Spanish) Philippines Portugal 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English ) 808-225-115 (Standard Charges Apply) (Portuguese) Romania 4-021-224-4015(Romanian) Russia +7-499-705-6204 +7-495-240-855
Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Recycling information Lenovo encourage owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: www.lenovo.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCentre ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.
