User Guide ThinkPad X1 Carbon
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety and Warranty Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 147 The latest Safety and Warranty Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www.lenovo.com/UserManual Second Edition (January 2014) © Copyright Lenovo 2014.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . . . vi Conditions that require immediate action . . vii Safety guidelines . . . . . . . . . . . . vii Chapter 1. Product overview . . . . . . 1 Locating computer controls, connectors, and indicators. . . . . . . . . . . . . . . . . Front view. . . . . . . . . . . . . . . Right-side view. . . . . . . . . . . . . Left-side view . . . . . . . . . . . . . Bottom view . . . . . . . . . . . . . . Rear view . . . .
Solving recovery problems . . . . . . . . Recovery overview for the Windows 8.1 operating system . . . . . . . . . . . . . . . . . . Refreshing your computer . . . . . . . . Resetting your computer to the factory default settings. . . . . . . . . . . . . . . . Using the advanced startup options . . . . Recovering your operating system if Windows 8.1 fails to start. . . . . . . . . . . . . Creating and using recovery media . . . . . Chapter 6. Replacing devices . . . . . Static electricity prevention . . .
Battery recycling information for Brazil . . . . . Battery recycling information for Taiwan . . . . . Battery recycling information for the European Union . . . . . . . . . . . . . . . . . . Battery recycling information for the United States and Canada . . . . . . . . . . . . . . . . 140 140 India RoHS . . . . . . . . . . . . . . . . Turkish RoHS . . . . . . . . . . . . . . . Ukraine RoHS . . . . . . . . . . . . . . . 143 143 144 141 141 Appendix D. ENERGY STAR model information . . . . . . . . . . .
iv User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive, do one of the following, and make sure that the power button is off or is blinking: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
product are zero. Before you remove the covers from a product equipped with a power cord, always make sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than USB cables while the computer power is on; otherwise, you might damage your computer.
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Notice for built-in rechargeable battery DANGER Do not attempt to replace the internal rechargeable lithium batteries. Contact Lenovo Support for factory replacement. Heat and product ventilation DANGER Computers, ac power adapters, and many accessories can generate heat when turned on and when batteries are charging.
Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet. • Connect to properly wired outlets any equipment that will be attached to this product.
CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level. Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the output of the headphone or earphone connectors do not comply with specifications of EN 50332-2.
xiv User Guide
Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels, computer features, specifications, operating environment, and preinstalled programs.
1 Camera Use the camera to take pictures or hold a video conference. For more information, see “Using the camera” on page 47. 2 Microphones The built-in microphones capture sound and voice when used with a program capable of handling audio. 3 Power button Use the power button to turn on the computer. To turn off the computer, use the Start menu shutdown option on the Microsoft® Windows® 7 operating system. For the Windows 8.
10 Ambient light sensor The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen brightness and keyboard backlight accordingly. Right-side view Figure 2. Right-side view 1 1 USB 3.0 connector 3 Fan louvers 2 Ethernet extension connector 4 Security-lock slot USB 3.0 connector The Universal Serial Bus (USB) 3.0 connector is used for connecting USB-compatible devices, such as a USB printer or a digital camera.
Note: To ensure proper airflow, do not place any obstacles in front of the fan louvers. 4 Security-lock slot To protect your computer from theft, you can purchase a security cable lock that fits the security-lock slot to lock the computer to a stationary object. Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature.
Left-side view Figure 3. Left-side view 1 1 Power connector 4 Mini DisplayPort® connector 2 Lenovo OneLink connector 5 Always-on USB 3.0 connector 3 HDMI™ connector 6 Audio connector Power connector When the ac power adapter is connected to the ac power connector, the ac power adapter provides power to the computer and charges the battery.
5 Always-on USB 3.0 connector The Always-on USB 3.0 connector is used for connecting USB-compatible devices, such as a USB printer or a digital camera. By default, the Always-on USB 3.
Bottom view Figure 4. Bottom view 1 Fan louvers 3 Emergency-reset hole 2 Speakers 1 Fan louvers The fan louvers and internal fan enable air to circulate in the computer and to ensure proper cooling, especially the cooling of the microprocessor. Note: To ensure proper airflow, do not place any obstacles in front of the fan louvers. 2 Speakers Your computer is equipped with a pair of stereo speakers.
Rear view Figure 5. Rear view 1 Micro-SIM-card tray (on some models) 1 Micro-SIM-card tray (on some models) If your computer supports the wireless wide area network (WAN) feature, a micro Subscriber Identification Module (SIM) card might be required to establish wireless WAN connections. Depending on the country or region of delivery, a micro SIM card might be already installed in the micro-SIM-card tray. Note: Ensure that you use a micro SIM card. Do no use a standard-sized SIM card.
Status indicators The status indicators show the current status of your computer. Note: Your computer might have slight variations from the following illustrations. 1 Caps Lock indicator • On: Caps Lock mode is turned on. You can type all alphabetic characters (A-Z) in upper case without pressing the Shift key. To turn off the Caps Lock mode, press the left Shift key twice. • Off: Caps Lock mode is turned off. To turn on Caps Lock mode, press the left Shift key twice.
• Blink fast: The computer is entering sleep or hibernation mode. • Blink slowly: The computer is in sleep mode. • Off: The computer is off or in hibernation mode. Locating important product information This section provides information to help you locate the machine type and model label, the FCC ID and IC Certification label, the Windows Certificate of Authenticity label, and the Genuine Microsoft label. Machine type and model information The machine type and model label identifies your computer.
The FCC ID and IC Certification number labels are affixed on the wireless WAN card card 2 installed in your computer. 1 and wireless LAN Note: Use only Lenovo-authorized wireless communication cards for the computer. If you install an unauthorized wireless communication card that is not approved for use in your computer, an error message will be displayed and the computer will beep when you turn on the computer.
Genuine Microsoft label The Genuine Microsoft label is provided on models that are licensed to use a Windows 8.1 operating system. The version of the Windows 8.1 operating system is printed on the label. If your computer model is licensed to use the Windows 8.1 Pro operating system, that license also permits you to use the Windows 7 Professional operating system in place of the Windows 8.1 Pro operating system if you prefer. Lenovo computers that are licensed for use with a Windows 8.
• Camera • Microphones • Multi-touch technology (on some models) Adaptive Keyboard • 5-row keyboard with backlight function • Adaptive Keys • ThinkPad TrackPoint pointing device and trackpad Interface • Audio connector • Lenovo OneLink connector • External monitor connectors (HDMI and Mini DisplayPort connectors) • Always-on USB 3.0 connector • USB 3.
Heat output • 45 W (154 Btu/hr) maximum • 65 W (222 Btu/hr) maximum Power source (ac power adapter) • Sine-wave input at 50 to 60 Hz • Input rating of the ac power adapter: 100 to 240 V ac, 50 to 60 Hz Battery status • For the percentage of remaining battery power, go to the desktop screen and check the battery-status icon in the Windows notification area. Operating environment This section provides information about the operating environment of the computer.
Accessing Lenovo programs on the Windows 7 operating system On the Windows 7 operating system, you can access Lenovo programs from either the Lenovo ThinkVantage® Tools program or from Control Panel. Accessing Lenovo programs from the Lenovo ThinkVantage Tools program To access Lenovo programs from the Lenovo ThinkVantage Tools program, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools. Then double-click a program icon to access the program.
• The Lenovo QuickCast program and the Lenovo QuickControl program are not listed in Control Panel. Use the Lenovo ThinkVantage Tools program to access them. Table 2.
Lenovo program overview This topic provides information about some Lenovo programs. Note: Depending on the model, some of the programs might not be available. • Access Connections (Windows 7) The Access Connections program is a connectivity assistant program for creating and managing location profiles. Each location profile stores all the network and Internet configuration settings needed for connecting to a network infrastructure from a specific location such as a home or an office.
• Lenovo Support (Windows 8.1) The Lenovo Support program enables you to register your computer with Lenovo, check the computer health condition and battery status, download and view user manuals, get the warranty information of your computer, and explore help and support information. • Lenovo Tools (Windows 8.1) The Lenovo Tools program helps you work more easily and securely by providing easy access to various program, such as Fingerprint Manager Pro, Lenovo Solution Center, and so on.
Chapter 2. Using your computer This chapter provides information on using some of the computer components.
How do I use battery power more effectively when I am on the go? • To conserve power, or to suspend operation without exiting programs or saving files, see “Power-saving modes” on page 36. • To achieve the best balance between performance and power saving, change power plan settings. See “Managing the battery power” on page 36.
3. On the Navigation tab, locate the Start screen section, and then do one of the following: – To set the desktop as your default startup screen, select When I sign in or close all apps on a screen, go to the desktop instead of Start so a check is visible. – To set the Start screen as your default startup screen, remove the check from the When I sign in or close all apps on a screen, go to the desktop instead of Start checkbox. 4. Click OK to save the new setting.
Tasks Touch gestures (touch models only) Mouse actions To zoom out Move two fingers closer together. Press the Ctrl key while scrolling the mouse wheel backward. To zoom in Move two fingers farther apart. Press the Ctrl key while scrolling the mouse wheel forward. To rotate an item Put two or more fingers on an item, and then rotate your fingers (supported only on some models). If the application supports rotation, click the rotation icon. To open a menu with multiple options Tap and hold.
Tasks Touch gestures (touch models only) Mouse actions To display the charms that contain system commands, such as Start, Settings, Search, Share, and Devices Swipe in from the right edge. Move the pointer to the bottom-right or top-right corner of your screen. To cycle through and switch to open applications Swipe in from the left edge. Move the pointer to the top-left corner of your screen, and then click. Keep clicking to cycle through the open applications.
Tasks Touch gestures (touch models only) Mouse actions To view the application commands on an open application, such as Copy, Save, and Delete, depending on the application Swipe in from the top or bottom edge. Right-click an open application. To close the current application Swipe in from the top edge to the bottom. Move the pointer to the top edge of the screen, click and hold the left button on your mouse, then move the pointer to the bottom of the screen.
Adaptive Keys overview The following illustration shows the location of the Adaptive Keys dynamically based on the application you are using. 1 .
Depending on your needs, you can customize the Adaptive Keys by removing Web-browser mode and Web-conference mode from the cycle list when you tap the Fn key. The Lay-flat mode is available only when you open your computer display to 180 degrees from the relative position of the keyboard. For more information, see “Modes of the Adaptive Keys” on page 26. Modes of the Adaptive Keys This topic provides information on the modes of the Adaptive Keys.
Function mode When you turn on the computer, the Function mode is displayed and active before the computer enters the Windows operating system. F1 through F12 provide the same functions as the F1 through F12 keys on a traditional keyboard. If you are using an application that supports the F1 through F12 functions, you can use the Fn key to cycle to the Function mode whenever you need it. The following illustration shows the icons displayed in the Function mode.
Table 3. Functions of the Adaptive Keys (continued) Adaptive Keys Functions 1. Tap the settings icon opens. in the Function mode. The Adaptive Keyboard Settings window 2. Click Mode Settings ➙ Advanced Settings, and then follow the instructions on the screen to set the Quick-access mode as you desired. Volume controls • • • : Decreases the speaker volume. : Mutes the speakers. When the speakers are muted, the red speaker-mute indicator turns on. : Increases the speaker volume.
Table 3. Functions of the Adaptive Keys (continued) Adaptive Keys Functions Changes the microphone noise-cancellation sensitivity. There are three kinds of noise-cancellation sensitivity : • : Only my voice • : Normal • : Multiple voices Turns on or turns off the camera. When the camera is turned off, the red camera-off indicator turns on . • Changes camera modes when you tap the icon. • Opens the Camera Settings screen when you tap and hold the icon for about two seconds.
Table 3. Functions of the Adaptive Keys (continued) Adaptive Keys Functions Rotates the screen clockwise. Each time you tap the icon, the computer screen rotates 90 degrees. • Opens the predefined cloud application as defined in the cloud settings when you tap the icon. • Opens the Cloud Settings screen when you tap and hold the icon for about two seconds. Note: By default, when you tap the icon for the first time, the Cloud Settings screen is displayed.
Table 4. Fn key combinations Fn key combination Function Fn+B Has the same function as the Break key on a conventional keyboard. Fn+I Has the same function as the Insert key on a conventional keyboard. Fn+K Has the same function as the ScrLK key on the conventional keyboard. Fn+P Has the same function as the Pause key on the conventional keyboard. Fn+S Has the same function as the SysRq key on the conventional keyboard. Fn+T Has the same function as the Prt Sc key on a conventional keyboard.
2. Follow the instructions on the screen to set the Adaptive Keys. Windows key On the Windows 7 operating system, press the Windows key 1 to open the Start menu. On the Windows 8.1 operating system, press the Windows key to switch between the current workspace and the Start screen. You also can use the Windows key together with another key to achieve other functions. For more information, refer to the help information system of the Windows operating system.
Using the ThinkPad pointing device The ThinkPad pointing device consists of a pointing stick 1 on the keyboard and the trackpad 2 . The whole trackpad is an active area sensitive to finger movement. The left click zones 3 and right click zones 5 work as the left and right mouse buttons on a conventional mouse. The scroll zone 4 enables you to scroll Web pages or documents in any direction.
Replacing the cap The cap 1 on the top of the TrackPoint pointing stick is removable. After you use the cap for a period of time, you can replace the cap with a new one. Note: The TrackPoint cap used in your computer has grooves a as shown in the following illustration. Ensure that you replace the TrackPoint cap with a correct one that has such grooves. Power management When you need to use your computer away from electrical outlets, you depend on battery power to keep your computer running.
Enabling the battery alarm on the Windows 7 operating system For the Windows 7 operating system, you can program your computer so that when the battery power falls below a certain level, three events occur: the alarm goes off, a message is displayed, and the LCD is turned off. To enable the battery alarm, do the following: 1. Start the Power Manager program. 2. Click the Global Power Settings tab. 3.
If an ac outlet is convenient, plug the ac power adapter into the outlet, and then plug it into ac power connector of the computer. The battery will be fully charged in about three to six hours. The charging time is affected by the battery size and the physical environment. You can check the battery charging status at any time through the battery-status icon in the Windows notification area.
• Hibernation mode By using this mode, you can turn off your computer completely without saving files or exiting any programs that are running. When the computer enters hibernation mode, all open programs, folders, and files are saved to the solid-state drive, and then the computer turns off. If you put your computer into hibernation mode with the wake-up function disabled, the computer does not consume any power. The wake-up function is disabled by default.
DANGER If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The battery pack contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery pack away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Store it in a cool dry place. • Keep it away from children. The battery pack is a consumable supply.
Ethernet connections You can connect your computer to a local network or a broadband connection by using the built-in Ethernet feature of the computer. DANGER To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet extension adapter. The following figure shows how to connect your computer to a LAN using the Ethernet extension adapter that comes with your computer.
• NFC connection Using the wireless LAN connection A wireless LAN covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.11 standards can connect to this type of network. Your computer comes with a built-in wireless network card and a configuration utility to help you establish wireless connections and monitor the connection status.
Checking the wireless LAN connection status You can check the wireless LAN connection status through the wireless-network-connection-status icon in the Windows notification area. The more bars encompassed, the better the signal is. For the Windows 7 operating system, you also can check the Access Connections gauge, the Access Connections status icon, or the Access Connections wireless status icon in the Windows notification area.
• Place your computer on a flat surface and open your computer lid to an angle of slightly more than 90 degrees. • Place your computer away from concrete or brick walls that might dampen cellular signals. • Best reception will be available near windows and other locations where cellular phone reception is the strongest. Checking the wireless WAN connection status You can check the wireless WAN connection status through the wireless-network-connection-status icon in the Windows notification area.
2. Locate the data you want to send and right-click the data. Note: If you are using the Windows 8.1 operating system, go to the desktop screen first, locate the data you want to send, and then right-click the data. 3. Select Send To ➙ Bluetooth Devices. 4. Select a Bluetooth device, and then follow the instructions on the screen. Note: If you use the wireless feature (the 802.
Connecting a projector or an external monitor This topic provides information about connecting a projector or an external monitor. Using an external monitor Note: When you connect an external monitor, a video interface cable with a ferrite core is required. Your computer can support a maximum video resolution of up to 2560x1440 or up to 1600x900, provided that the external monitor also supports that resolution.
12. Clear the Show compatible hardware check box. 13. Select the correct manufacturer and model for the external monitor. If you cannot find your monitor on the list, stop the installation of this driver and use the driver shipped with your monitor. 14. After updating the driver, click Close. Changing the color settings To change the color settings, do the following: 1. Right-click anywhere on the desktop, and then click Screen resolution. 2.
Using the Duplicate or Extend desktop function With the Duplicate desktop function, you can display the same output on both the computer display and an external display. You also can display different desktop images on each monitor with the Extend desktop function. You can use the Duplicate or Extend desktop function without changing any settings. If the function does not work, refer to the following topic on how to enable the Duplicate or Extend desktop function.
• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3 (MP3) files • Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files • Recording from various sound sources, such as a headset attached The following table shows the supported functions for the audio devices attached to the connectors on your computer or ThinkPad OneLink Dock. Table 5. Audio feature list Connector Headset with a 3.5 mm (0.
To configure the camera settings, do the following: • For Windows 8.1, do one of the following: – Configure the camera settings directly from the program that is using the camera. For more information, see the help information system of the program. – Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the screen to configure the camera settings as desired. • For Windows 7: Start the Communications Utility program and configure the camera settings as desired.
Table 6. Sample camera gestures (continued) Camera gestures Actions Functions Supported apps Open your hand, put it in front of the camera, and then tap against the computer display. Pause or play. Media players Raise your fist, and then move it upward or downward. Move your fist upward to increase or downward to decrease the volume. Media players Open your hand, and then raise it in front of the camera. Enable hand-tracking.
50 User Guide
Chapter 3. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 51 • “Traveling with your computer” on page 53 Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
Display: Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position. Chair: Use a chair that gives you good back support and seat height adjustment.
Assistive technologies Some accessibility technologies are available through the Accessibility Options program. Depending on your operating system, the number of accessibility options available varies. In general, accessibility options enhance the way users with hearing, vision, or mobility limitations navigate and use their computer. For example, some users might not have the fine motor skills required to use a mouse or select key combinations.
• Mini-DisplayPort to VGA Adapter Cable • External mouse, if you are accustomed to using one • Ethernet extension adapter • Ethernet cable • A quality carrying case that provides adequate cushion and protection • External storage device If you are traveling to another country, you might want to consider an ac power adapter for the country to which you are traveling. To purchase travel accessories, go to http://www.lenovo.com/accessories.
Chapter 4. Security This chapter provides information about how to protect your computer from theft and unauthorized use.
3. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter Current Password field, type the current power-on password and press Enter. b.
– Internal wireless device – Internal Bluetooth device – Internal Network Option ROM – Internal wireless WAN device – Security mode – Fingerprint reader priority Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a supervisor password is required.
If a user hard disk password has been set, but no master hard disk password has been, the user must enter the user hard disk password to access files and applications on the solid-state drive. • Master hard disk password The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any solid-state drive in a system like a master key.
3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is changed. Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2.
the Windows 7 operating system and Windows 8.1 operating system. See “Using Windows BitLocker Drive Encryption” on page 60. • Before you dispose of, sell, or hand over your computer, delete data stored on it. For more information, refer to “Notice on deleting data from your solid-state drive” on page 64. The solid-state drive built into your computer can be protected by the UEFI BIOS.
To set an item on the Security Chip submenu, do the following: 1. Restart the computer. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 2. Select Security ➙ Security Chip by using the directional keys. 3. Press Enter. The Security Chip submenu opens. 4. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 5. Set other items that you want to set. 6. Press F10. A Setup Confirmation window is displayed.
Swiping your finger over the fingerprint reader To swipe your finger over the fingerprint reader, do the following: 1. Place the top joint of your finger on the sensor. 2. Apply light pressure and swipe your finger toward you across the reader in one smooth motion. Do not lift your finger when you are swiping it.
Indicator behavior of the fingerprint reader Indicator behavior Description Green The fingerprint reader is ready for swiping. Amber The fingerprint cannot be authenticated. Associating your fingerprints with your power-on password and hard disk password To associate your fingerprints with your power-on password and hard disk password, do the following: 1. Turn off and then turn on the computer. 2. When prompted, swipe your finger over the fingerprint reader. 3.
• Security Mode: Specifies the settings of the security mode. • Password Authentication: Enables or disables the password authentication. Note: This item is displayed only if High security mode is enabled. • Reset Fingerprint Data: Select this item to erase all of the fingerprint data stored in either the internal or external fingerprint reader.
• Format your solid-state drive, using the software for initializing it. • Use the recovery program provided by Lenovo to bring the solid-state drive back to the factory default settings. These operations, however, only change the file location of the data; they do not delete the data itself. In other words, the data retrieval processing is disabled under an operating system such as Windows operating system. The data is still there, even though it seems to be lost.
66 User Guide
Chapter 5. Recovery overview This chapter provides information about the recovery solutions. • “Recovery overview for the Windows 7 operating system” on page 67 • “Recovery overview for the Windows 8.1 operating system” on page 72 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
Using recovery media On the Windows 7 operating system, you can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed. Attention: When you use recovery media to restore the computer to the factory default settings, all the files currently on the solid-state drive will be deleted and replaced by the factory default settings.
1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens. 2. In the Rescue and Recovery main window, click the Launch advanced Rescue and Recovery arrow. 3. Click the Restore your system from a backup icon. 4. Follow the instructions on the screen to complete the recovery operation.
• To restore your solid-state drive from a Rescue and Recovery backup or to restore your solid-state drive to the factory default settings, click Restore your system and follow the instructions on the screen. For more information about the features of the Rescue and Recovery workspace, click Help. Notes: 1. After restoring your solid-state drive to the factory default settings, you might have to reinstall device drivers for some devices.
When the rescue medium starts, the Rescue and Recovery workspace opens. The help information for each feature is available from the Rescue and Recovery workspace. Follow the instructions to complete the recovery process. Reinstalling preinstalled programs and device drivers Your computer has provisions that enable you to reinstall selected factory-installed programs and device drivers. Reinstalling preinstalled programs To reinstall selected programs, do the following: 1. Turn on your computer. 2.
• Use recovery media if all other methods of recovery have failed and you need to restore the solid-state drive to the factory default settings. See “Performing backup and recovery operations” on page 68. Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a rescue medium or recovery media, you might not have the rescue device (a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startup device sequence.
3. Depending on your needs, do one of the following: • To perform a quick format, click Just remove my files to start the process. The process will take several minutes. • To perform a complete format, click Fully clean the drive to start the process. The process will take several hours. 4. Follow the instructions on the screen to reset your computer to the factory default settings.
3. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start. 4. Ensure that you select the Copy the recovery partition from the PC to the recovery drive. option. Then click Next. Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option, you will create recovery media without the recovery partition content.
Chapter 6.
5. Click Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off. Wait for a few minutes to let the computer cool. The built-in battery will be enabled automatically when the computer is connected to an ac power adapter. Installing or replacing the micro SIM card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
5. Install a new micro SIM card into the tray. Note: Ensure that you use a micro SIM card. Do no use a standard-sized SIM card. The standard-sized SIM card is not compatible. 6. Insert the tray into the computer. 7. Reconnect the ac power adapter and all cables. Replacing the base cover Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic. To replace the base cover, do the following: 1.
3. Remove the screws cover 3 . 1 and loosen the screws 4. Reinstall the new base cover 1 2 that secure the base cover. Then remove the base , tighten the screws 2 , and then reinstall the screws 3 . 5. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the solid-state drive Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
• Replace the solid-state drive only if you upgrade it or have it repaired. The connectors and slot of the solid-state drive are not designed for frequent changes or replacement. • Do not drop the solid-state drive or subject it to physical shocks. Put the solid-state drive on a material, such as soft cloth, that absorbs any physical shocks. • Do not apply pressure to the cover of the solid-state drive. • Do not touch the connector.
6. Install the new solid-state drive. 7. Install the screw to secure the new solid-state drive. 8. Reinstall the base cover. 9. Turn over the computer and connect the ac power adapter and all cables. Replacing the wireless LAN card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic. DANGER During electrical storms, do not connect the cable to or disconnect it from the telephone outlet on the wall.
Attention: Before you start installing the wireless LAN card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the card. To replace the wireless LAN card, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 75. 2. Close the computer display, and turn the computer over. 3. Remove the base cover. See “Replacing the base cover” on page 77. 4.
6. Carefully remove the wireless LAN card out of the slot. 7. Align the notched edge of the new wireless LAN card with the key in the slot. Then carefully insert the card into the slot at an angle of about 20 degrees. 8. Install the screw to secure the new wireless LAN card in place.
9. Connect the antenna cables to the new wireless LAN card. Ensure that you attach the gray cable to the connector marked 2 on the card, and the black cable to the connector marked 1 on the card. 10. Reinstall the base cover. 11. Turn the computer over again. Connect the ac power adapter and all cables. Installing or replacing the wireless WAN card Before you start, print these instructions. Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
a. If a tool is provided with the new card to help you disconnect cables, use the tool to disconnect the cables from the old card. If no such a tool is provided, hold the cable connector with your fingers and gently disconnect each cable from the old card. b. Remove the screw that secures the wireless WAN card. c. Carefully remove the wireless WAN card out of the slot.
5. Align the notched edge of the new wireless WAN card with the key in the slot. Then carefully insert the card into the slot at an angle of about 20 degrees. 6. Install the screw to secure the card in place. 7. Connect the antenna cables to the new wireless WAN card. Ensure that you connect the orange cable to the main connector on the card, and the blue cable to the auxiliary connector on the card. 8. Reinstall the base cover. 9. Turn the computer over again.
86 User Guide
Chapter 7. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. It includes the following topics: • “Finding ThinkPad options” on page 87 • “ThinkPad docks” on page 87 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
ThinkPad OneLink Dock and ThinkPad OneLink Pro Dock front view 1 Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other non-permanent fixture. 2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0.
ThinkPad OneLink Dock rear view 1 USB 2.0 connector: Used to connect devices that are compatible with USB 2.0. 2 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector have the same function as the ones on the computer. 3 HDMI connector: Used to connect a digital audio device or video monitor that is compatible with HDMI. 4 Power connector: Used to connect the ac power adapter.
ThinkPad OneLink Pro Dock rear view 1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. 2 USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0. 3 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector have the same function as the ones on the computer. The Ethernet connector supports PXE boot on your computer. For more information about PXE boot, see “Preboot eXecution Environment” on page 105.
Chapter 8. Advanced configuration This chapter provides the following information to help you configure the computer: • “Installing a new operating system” on page 91 • “Installing device drivers” on page 93 • “Using the ThinkPad Setup program” on page 93 • “Using system management” on page 104 Installing a new operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a new operating system.
When you install the Windows 7 operating system, you might need one of the following country or region codes: Country or region Code Country or region Code China SC Netherlands NL Denmark DK Norway NO Finland FI Spain SP France FR Sweden SV Germany GR Taiwan and Hong Kong TC Italy IT United States US Japan JP Installing the Windows 8.1 operating system Before you start, print these instructions.
Italy IT Japan JP United States US Installing device drivers Device driver is the program that operates a particular hardware device of the computer. If a device does not perform well or you install a new device, you need to install or update the corresponding device driver. For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to download and install the USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.
Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date • Embedded Controller Version • ME Firmware Version • Machine Type Model • System-unit serial number • System board serial number • Asset Tag • CPU Type • CPU Speed • Installed memory • UUID • MAC Address (Internal LAN) • Preinstalled operating system license • UEFI Secure Boot Config menu To change the configuration of your computer, select the Config tab from the ThinkPad
Table 7. Config menu items (continued) Menu item Submenu item Value Comments UEFI IPv4 Network Stack • Disabled Enable or disable Internet Protocol Version 4 (IPv4) network stack for UEFI environment. UEFI IPv6 Network Stack • Disabled UEFI PXE Boot Priority • IPv6 First • Enabled • Enabled • IPv4 First USB USB UEFI BIOS Support • Disabled Always On USB • Disabled • Enabled • Enabled - Charge in Battery Mode • Disabled USB 3.
Table 7. Config menu items (continued) Menu item Submenu item Value Comments Display Boot Display Device • ThinkPad LCD Select the display device that is to be activated at boot time. This selection is effective for boot time, password prompt, and ThinkPad Setup. • HDMI • DisplayPort • Display on dock HDMI is the HDMI connector on your computer. This option is not available when the computer is connected to a dock. DisplayPort is the Mini DisplayPort connector on your computer.
Table 7. Config menu items (continued) Menu item Submenu item Value Comments If you select Disabled, the system is not powered on nor resumed when the ac power adapter is attached. Intel Rapid Start Technology Disable Built-in Battery • Disabled • Enabled To use this feature, a special partition on the solid-state drive is required.
Table 7. Config menu items (continued) Menu item Submenu item Value Comments CIRA Timeout 0-255 Set the timeout option for CIRA connection to be established. Selectable second values are from 1 to 254. Note: The default value is 60 seconds. If you select 0, use 60 seconds as the default timeout value. If you select 255, the waiting time for establishing a connection is unlimited. Console Type • PC ANSI Select the console type for AMT.
Table 8. Security menu items (continued) Menu item Submenu item Value Comments goes ahead and loads the operating system. To prevent unauthorized access, set the user authentication on the operating system.
Table 8. Security menu items (continued) Menu item Submenu item Value Comments UEFI BIOS Update Option Flash BIOS Update by End-Users • Disabled If you select Enabled, all users can update the UEFI BIOS. If you select Disabled, only the person who knows the supervisor password can update the UEFI BIOS. Secure RollBack Prevention • Disabled (If OS Optimized Defaults is set as disabled.) • Enabled If you select Disabled, you can flash the older version UEFI BIOS.
Table 8. Security menu items (continued) Menu item Submenu item Value Comments Memory Protection Execution Prevention • Disabled Some computer viruses and worms cause memory buffers to overflow. By selecting Enabled you can protect your computer against attacks by such viruses and worms. If after choosing Enabled you find that a program does not run correctly, select Disabled and reset the setting.
Table 8. Security menu items (continued) Menu item Submenu item Value Comments Anti-Theft Intel AT Module Activation • Disabled Enable or disable the UEFI BIOS interface to activate the Intel AT module, which is an optional anti-theft service from Intel. • Enabled • Permanently Disabled Intel AT Suspend • Enter Note: If you set the Intel AT module activation to Permanently Disabled, you will be unable to enable this setting again.
• After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a format operation. Otherwise your data might be erased or overwritten. • If you are using the BitLocker drive encryption, do not change the startup sequence. BitLocker drive encryption locks the computer from starting once detects the change of startup sequence. To change the startup sequence temporarily so that the computer starts from a desired drive, do the following: 1. Turn off the computer. 2.
Table 9. Startup menu items (continued) Menu item Value Comments Option Keys display • Disabled If you select Disabled, the “To interrupt normal startup, press Enter.” message is not displayed during the POST. • Enabled Boot Device List F12 Option • Disabled • Enabled Boot Order Lock • Disabled • Enabled If you select Enabled, the F12 key is recognized and the Boot Menu window is displayed. If you select Enabled, the boot priority order is locked for your future use.
Desktop Management Interface The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS) Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices on the system board. This specification documents the standards for getting access to this BIOS information.
Defining a Network Boot sequence When the computer wakes on LAN, the computer starts from the device as specified on the Network Boot menu, and then follow the boot order list on the Boot menu. To define a Network Boot sequence, do the following: 1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 93. 2. Select Startup ➙ Network Boot. The boot device list is displayed. 3. Select a boot device to make it as the top boot priority. 4. Press F10.
Chapter 9. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. This chapter provides information that can help you keep your computer running smoothly.
• For suspected solid-state drive issues, refer to “Diagnosing problems” on page 113 and run a diagnostic test for the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest. Run the test and record any messages or error codes. If the test returns any failing error codes or messages, call the Customer Support Center with the codes or messages and the computer in front of you.
Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following the important tips in this topic, you will get the most use and enjoyment out of your computer. Be careful about where and how you work • Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic bags.
Take care in setting passwords • Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and you might have to replace your system board or solid-state drive. Taking care of the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: • Scratching the surface of the fingerprint reader with a hard, pointed object. • Scraping the surface of the fingerprint reader with your fingernail or anything hard.
4. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush or cool air from a hair dryer. Cleaning your computer display To clean the computer display, do the following: 1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover was pressed from the outside. 2. Wipe or dust the stain gently with a soft, dry cloth. 3.
112 User Guide
Chapter 10. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. • “Diagnosing problems” on page 113 • “Troubleshooting” on page 113 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
• If you cannot turn off your computer by pressing and holding the power button, remove all sources of power from the computer and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 7. After the computer is off, reconnect the ac power adapter and restart the computer by pressing the power button. If the computer does not turn on, continue with step 3. 2.
Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error Solution: The computer turned off, because the battery is low. Connect the ac power adapter to the computer and charge the battery. • Message: 0191: System Security - Invalid remote change requested Solution: The system configuration change has failed. Confirm the operation and try again.
Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the power button for four seconds or more. Then turn on the computer and listen again. Solution: Make sure that: – The ac power adapter is connected to the computer and the power cord is plugged into a working electrical outlet. – The computer is turned on. (Press the power button again for confirmation.) – The brightness level of the screen is appropriately set.
1. Check for error messages during startup. Follow the appropriate corrective actions for power-on self-test (POST). See “Error messages” on page 114. 2. Verify that the latest UEFI BIOS for your model has been installed. 3. Verify the proper memory configuration and compatibility including the maximum memory size and the memory speed. 4. Run the Lenovo Solution Center program. See “Diagnosing problems” on page 113. Networking problems The following are the most common networking problems.
• Problem: My computer is a Gigabit Ethernet model, but the computer cannot connect to the network at 1000 Mbps. Instead, it connects at 100 Mbps. Solution: – Try another cable. – Make sure that the link partner is set to auto-negotiate. – Make sure that the switch is 802.3ab-compliant (gigabit over copper). A wireless LAN problem Problem: I cannot connect to the network using the built-in wireless network card. Solution: Make sure that: • Your wireless LAN driver is the latest version.
Problems with the keyboard and other pointing devices The following are the most common problems with keyboards and other pointing devices. TrackPoint pointing device problems • Problem: The pointer drifts when the computer is turned on or after it resumes normal operation. Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect.
– If the problem persists, follow the solution for the following problem. • Problem: The screen is unreadable or distorted. Solution: Make sure that: – The display device driver is installed correctly. – The screen resolution and color quality are correctly set. – The monitor type is correct. To check these settings, do the following: 1. Right-click anywhere on the desktop, and click Personalize. 2. Click Display at the left. 3. Select Change display settings.
3. Refer to the manual shipped with the external monitor to check the resolutions and refresh rates that are supported. – If the external monitor supports the same resolution as the computer display or a higher resolution, view output on the external monitor or on both the external monitor and the computer display. – If the external monitor supports a lower resolution than the computer display, view output on the external monitor only.
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For more information, see the documentation that comes with the monitor. Audio problems • Problem: Wave or MIDI sound does not play correctly. Solution: Make sure that the built-in audio device is configured correctly. 1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4.
Solution: It is normal for the sliders to change position when certain sound programs are used. The programs are aware of the settings in the Volume Mixer window and are allowed to change the settings themselves. An example is the Windows Media Player. Usually the program has sliders available to control the sound from within the program. • Problem: The balance slider cannot completely mute one channel.
• Problem: The battery cannot be charged. Solution: You cannot charge the battery when it is too hot. Turn off the computer and allow it to cool to room temperature. After it cools, recharge the battery. If it still cannot be charged, call Lenovo Customer Service Center to have it serviced. An ac power adapter problem Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the power adapter (power plug) icon is not displayed in the Windows notification area.
If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the error message. Sleep and hibernation problems • Problem: The computer enters sleep mode unexpectedly.
If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device. • Problem: The battery discharges slightly while the computer is in hibernation mode. Solution: If the wakeup function is enabled, the computer consumes small amount of power. This is not a defect. For more information, see “Power-saving modes” on page 36.
Solution: Make sure that: • The ThinkPad OneLink Dock is connected to power. • The computer is correctly connected to the ThinkPad OneLink Dock. Chapter 10.
128 User Guide
Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 129 • “Getting help and service” on page 129 • “Purchasing additional services” on page 131 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
• • • • • • Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts Identification of software problem sources Configuration of the UEFI BIOS as part of an installation or upgrade Changes, modifications, or upgrades to device drivers Installation and maintenance of network operating systems (NOS) Installation and maintenance of application programs For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see “Warranty information
132 User Guide
Appendix A. Regulatory Information Wireless related information Wireless interoperability The M.2 wireless LAN card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g or 802.11n draft 2.
• Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes they are safe for use by consumers.
4 Wireless LAN antenna (main) Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with the computer. If the computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/UserManual Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 4A994.b.
Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. European Union - Compliance to the Electromagnetic Compatibility Directive This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B. Korea Class B compliance statement Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Lenovo product service information for Taiwan Eurasian compliance mark Appendix A.
138 User Guide
Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
142 User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo progress on RoHS, go to: http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.
Ukraine RoHS 144 User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation.
3. In the Device Manager window, expand Network adapters. 4. Right-click your network adapter device, and click Properties. 5. Click the Power Management tab. 6. Clear the Allow this device to wake the computer check box. 7. Click OK.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Rescue and Recovery ThinkPad ThinkVantage TrackPoint UltraConnect Chrome is a trademark of Google Inc. Intel and Intel SpeedStep are trademarks of Intel Corporation in the U.S. and/or other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
