Owner's Manual

ManualsBrandsLenovo ManualsSwitchLenovo 1754D1T ThinkSystem Digital 2x1x16 KVM Switch

Table Of Contents

Lenovo ThinkSystem Digital 2x1x16 KVM Switch

Product Guide

The Lenovo ThinkSystem Digital 2x1x16 KVM Switch is a high performance digital KVM (keyboard, video,

mouse) switch that provides two IT administrators with remote access and control of 16 servers over the

network with BIOS-level functionality. ThinkSystem Digital 2x1x16 KVM Switch is completely hardware and

OS-independent, and users can troubleshoot and reconfigure servers even when servers are down.

The switch has 16 target ports and supports up to 2 remote users and 1 local user.

Figure 1. Lenovo ThinkSystem Digital 2x1x16 KVM Switch (front and rear)

Did you know?

The ThinkSystem Digital 2x1x16 KVM Switch provides cost-effective remote management, access, and

security capabilities with out-of-band access to servers all from a single appliance. Connections to the

target servers from the switch use low-cost and flexible CAT-5 cables for convenience and durability.

Lenovo ThinkSystem Digital 2x1x16 KVM Switch 1

Summary of content (12 pages)

PAGE 1
Lenovo ThinkSystem Digital 2x1x16 KVM Switch Product Guide The Lenovo ThinkSystem Digital 2x1x16 KVM Switch is a high performance digital KVM (keyboard, video, mouse) switch that provides two IT administrators with remote access and control of 16 servers over the network with BIOS-level functionality. ThinkSystem Digital 2x1x16 KVM Switch is completely hardware and OS-independent, and users can troubleshoot and reconfigure servers even when servers are down.
PAGE 2
Part number information Ordering information is shown in the following table. Table 1.
PAGE 3
The VGA to DVI Conversion Cable, 4X97A11108, can be used with the local console connection (see below) if you are using a monitor with a VGA cable. The VGA to DVI cable is shown in the following figure. For details on when to use the VGA to DVI Conversion Cable, see this support tip: https://datacentersupport.lenovo.com/us/en/solutions/ht510707 Figure 3.
PAGE 4
Connections The following figure shows the connections on the rear of the Digital 2x1x16 KVM Switch. Figure 4. Connections on the rear of the Digital 2x1x16 KVM Switch The following figure shows the front of the Digital 2x1x16 KVM Switch. Figure 5.
PAGE 5
Features Details about the features of the Digital 2x1x16 KVM Switch are as follows. Target systems: The Digital 2x1x16 KVM Switch has 16 target system ports. Up to 16 servers can be connected to the KVM switch from these ports using standard CAT-5 cables with RJ45 connectors. At each target server end, conversion cables are used to convert the RJ45 connector to VGA and USB connectors: Single-USB Conversion Cable for Digital KVM provides a VGA connector and one USB connector.
PAGE 6
Local and remote user interfaces: The mangement interface for the Digital 2x1x16 KVM Switch is browser-based, and is accessible both locally and remotely. You can use the local management interface by connecting directly to the local port and pressing Scroll Lock twice. You can also use the remote browser interface to manage your switch. The browser interface is launched directly from the switch, and any devices connected to the switch are automatically detected.
PAGE 7
The switch also allows you to use smart cards to ensure access is authorized. Smart cards are pocket-sized cards that store and process information. Smart cards such as the Common Access Card (CAC) can be used to store identification and authentication to enable access to computers, networks, and secure rooms or buildings.
PAGE 8
Specifications The ThinkSystem Digital 2x1x16 KVM Switch has the following specifications: Based on the Raritan Dominion KX III KVM switch Supports 2 remote users and 1 local user concurrently Local user connections are USB mouse & keyboard and a DVI video port; 2 additional USB 2.
PAGE 9
Comparison with the GCM16 console switch The following table compares the Digital 2x1x16 KVM Switch with the GCM16 console switch. Table 2.
PAGE 10
Physical specifications The ThinkSystem Digital 2x1x16 KVM Switch has the following specifications: Height: 44 mm (1.73 inches): 1 rack unit (1R) Width: 440 mm (17.3 inches) Depth: 334 mm (13.2 inches) Weight: 4.1 Kg (9.1 lb) Operating environment The switch is supported in this environment: Temperature: Operating: 0° to 45°C (32° to 113°F) Non-operating: -20° to 60°C (-4° to 140°F) Relative humidity: 0% to 85% Warranty The ThinkSystem Digital 2x1x16 KVM Switch has a three-year limited warranty.
PAGE 11
Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
PAGE 12
Trademarks Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/. The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo® ThinkSystem The following terms are trademarks of other companies: Linux® is the trademark of Linus Torvalds in the U.S. and other countries.