BTT-6 3D SOUND SPEAKERTOWER WITH BLUETOOTH® User manual www.lenco.eu V1.
Table of contents What’s in the box? ...................................................................................................... 3 3D Sound ................................................................................................................... 4 Exploring the device ................................................................................................... 4 Top view ...............................................................................................................
Dear customer, Thank you for buying this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this tablet, we have manufactured this product using high quality standards, materials, components, and care. Please read all safety instructions and national restrictions, before you use this product. Note: This user manual was printed prior to the development of this product.
3D Sound This is a model that features integrated Sonic Emotion 3D Sound, a technology that uses Wave Field Synthesis to create the illusion that sound comes from all around the room. Every type of input, even stereo, iPhone, iPad, iPod, Touch / smartphone Bluetooth music streaming, stereo FM-radio or Auxin music that is being played in stereo can be used to create a virtual soundfield using WFS by Sonic Emotion. This enabled you to enjoy the finest audio, no matter where you are in the room.
Front view 14 14 15 22 21 20 19 18 17 16 14. Speakers. 15. Subwoofer. 16. Infrared eye, the infrared eye receives the remote control’s signals. 17. AUX LED, this LED will be lit when the device in in the AUX mode. 18. Bluetooth® LED, this LED will be lit when the device is in the Bluetooth® mode. 19. FM LED, this LED will be lit when the device is in the radio mode. 20. FM Band decimal LED. 21. LED Display, this display shows the most important information. 22.
Exploring the remote control 1 9 10 11 12 13 14 15 2 3 4 5 6 7 8 16 1. 2. 3. 4. 5. 6. Infrared LED, this LED sends infrared signals to the main unit. Standby button, press this button to turn the device on or off. BT button, press this button to enter the Bluetooth® mode. AUX button, press this button to enter the AUX mode. MEM button, use this button to save radio stations. Volume + / - buttons, press the volume + button to increase the volume. Press the volume – button to decrease the volume. 7.
Getting started Where to install Never place the tower in direct sunlight. For comfortable viewing, we recommend a soft light. Place it on a sturdy platform of which the surface should be flat and steady, so the product can’t fall or hit by any objects. Make sure the product is placed in such a manner that nothing can fall on top of it, as pressure will damage or break the product. Prevent insertion of objects into the ventilation slots, or openings in the cabinet at all time.
Establishing a Bluetooth® connection Bluetooth® LED indicator information: The Bluetooth® LED will burn continuously if the device is searching for a Bluetooth® device. The Bluetooth® LED will blink if it is paired with a Bluetooth® device. The Bluetooth® information of this product is: Name: Lenco Password / PIN: 0000 Before you start the configuration of the Bluetooth® connection, make sure that the Bluetooth® module on your smartphone or tablet is turned on.
Bluetooth® All of the functions below only work when in Bluetooth® mode with another device paired to the tower. Music playback Press the play button on the tower or remote control to start music playback. button, press this button on the tower or remote control to go to the next song. button, press this button on the tower or remote control to go to the previous song. Volume + / - buttons, press the volume + button on the tower or remote control to increase the volume.
Reset If the device does not respond to the controls anymore, you can press the reset button with a think object such as an paperclip. When the device is reset, the system memory is cleared and all settings will be erased. System settings Setting the display backlight level Press the dimmer button on the remote control to adjust the backlight intensity. The intensity can be set to low or high. Setting the clock 1. 2. 3. 4. 5. 6.
Safety instructions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT AN ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this device.
Safety instructions - continued WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH THE VENTS OR OPENINGS. HIGH VOLTAGE FLOWS THRU THE PRODUCT AND INSERTING AN OBJECT CAN CAUSE ELECTRIC SHOCK AND/OR SHORT CIRCUIT INTERNAL PARTS. FOR THE SAME REASON, DO NOT SPILL WATER OR LIQUID ON THE PRODUCT. Do NOT use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools. Do not use this device when condensation may occur.
Do not distribute copyright-protected material Do not distribute copyright-protected material without the permission of the content owners. Doing this may violate copyright laws. The manufacturer is not liable for any legal issues caused by the user’s illegal use of copyrighted material. Keep your personal and important data safe 1. When you want to dispose of your device reset your device to prevent misuse of your personal information.
Service and support For information and support: www.lenco.eu Lenco helpdesk: Germany The Netherlands Belgium France 0900-1520530 0900-23553626 02-6200115 0170480005 (Local charges) (Local charges + 1ct P/min) (Local charges) (Local charges) The helpdesk is accessible from Monday to Friday from 9 AM till 6 PM. In case your device needs repair, our helpdesk will redirect you to your local dealer.
End of life This symbol indicates that the relevant electrical product or battery can’t be disposed as general household waste in Europe. To ensure the correct waste treatment of this device and the battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment and batteries.