USER’S MANUAL BT-160 LIGHT Light Bluetooth Speaker For more information: www.lenco.
A. Warning Don’ts Do not place naked flames, such as lighted candles on or near the product. Do not place objects filled with liquids, such as vases on or near the product. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. Do not clean this product with water or other liquids. Do not block or cover the slots and holes in the product. Do not push foreign objects into the slots or holes in the product.
B. Outlook and Controls Please note: After reset by pressing Reset button, it will be in AUX In mode and you should press M button to switch to different modes. C. Quick Start 1.
SLOT Diagram 1、 AUX in slot： Insert 3.5mm audio cable，Press to switch to AUX in mode, working as the external speaker of audio input. 2、Power/Working status indictor: Normal working or finished charging, the LED indicator will turn to blue. 3、Micro USB slot: For charging 4、ON/OFF: Switch the button to power on/off the speaker。 5. Micro SD Card Music Playing D. Instructions Bluetooth 1.
③ Dial Back the call Double press the button, Dial the last call back LED Themes Short press to switch the LED Themes, there are five different LED themes Please note: The Club and Equalize themes only display when music playing 1. AUX in Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). Short press the M button to enter “AUX IN” mode (the speaker will voice “Aux in” mode). The speaker will play the music from the audio source.
3. Micro SD Card Music Playing Inserting the Micro SD Card into the speaker to enter the memory card mode, the speaker will play the Micro SD card music directly. (Speaker will voice “memory card mode”). The speaker support music format at WAV, MP3, WMA, APE and FLAC. E. About the rechargeable Battery This Bluetooth Speaker has an internal, non–user-replaceable battery.
check if the device can support the A2DP stereo audio transmission. If yes, please turn on the A2DP stereo mode. 2. What should I do if the Micro SD card cannot work? (1) Ensure that the Micro SD card is in good condition. Also check that the audio files are the correct formats - MP3/WMA/WAV/APE/FLAC. (2) Besides the above case, the problem maybe the compatibility of the Micro SD card. We recommend you formatting the Micro SD Card to FAT32 file formats. G.
situation. No legal right or entitlements may be obtained from the description made in this manual. I. Service and Support For information: www.lenco.com Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.
® All rights reserved 9
