MDV-24 Home Cinema Set
FOREWORD THANKS Thank you for purchasing this product! Your choice of the product sufficiently displays your expertise in acoustic equipment. We are honored to provide you with more satisfactory products.
CONTENT FOREWORD……………………………………………………………………………………..1 CONTENT………………………………………………………………………………………...2 FRONT PANEL...………………………………………………………………………………..3 BACK PANEL……………………………………………………………………………………4 REMOTE CONTROL……………………………………………………………………………5 CONNTECTION WITH TV……………………………………………………………………...6 CONNECTION WITH AMPLIFIER………………………………………………………….….7 SYSTEM CONNECTION…………………………………………………………………….….8 BASIC OPERATION……………………………………………………………………..…..9-16 DVD MENU SETUP…..…………………………………………………………………….
FRONT PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
BACK PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Scart output Y, Pb/Cb, Pr/Cr component output L/R front audio output Coaxial output S-video and Video outputs Optical fiber output FM antenna interface AM antenna interface Power supply input L/R audio input 2.
REMOTE CONTROL NOTE: 1. Place the batteries in the remote control and turn on the player, put the emitter against the sensor of player for remote control. 2. The distance of remote control should not exceed 7 meters, or else, it will be invalid. 3. If the sensor or remote control emitter is stuck with foreign matters, it may result in the malfunction in signal reception or not at all. 4.
CONNECTION WITH TV 1. If your TV-set has AV terminal, connect this unit to TV-set with A/V cables, and set TV-set to be AV 2. If your TV-set has S-Video terminal, please use the S-Video connection cable to connect the status after confirming the connection is correct. (Figure 1) player and TV-set, to obtain a higher quality image. (Figure 2) 3. If your TV-set has chromatics output terminal, please use three connection cables to connect the 4.
CONNECTION WITH AMPLIFIER Setup of Digital Audio Output Connect the optical or coaxial output jack to the amplifier. While in of play or stop mode, press the setup button on the remote control to open the system setup page, switch to audio setup page by pressing the directional buttons, then move the cursor to Audio Out, select SPDIF/RAW or SPDIF/PCM, press Play/Enter button to finish. Press setup button again to exit the setup.
SYSTEM CONNECTION Please refer to the following figure to connect your acoustic equipment. To keep all the connection correctly and firmly. Power supply can be connected finally.
BASIC OPERATION PREPARATIVE 1). Before turning on, check whether all the connection are correct and reliable. Plug the power plug into the corresponding power socket. 2). Press Power button on the front panel to turn on. 3). Press Eject button on the remote control (or Open/Close button on the front panel) to carry the disc tray outside, put the disc into the tray, press Eject or Open/Close button again, this unit starts to read and play.
BASIC OPERATION TIME SELECTION In play mode, press T/F button on the remote control, the TV screen displays If you want to adjust the volume of the Treble or Bass. First press the Tone button, select the corresponding item and press Vol+/- button on the remote control to increase or reduce the volume of the Treble or Bass.
BASIC OPERATION A-B REPEAT In play status, press A-B REP button to realize the specific section repeat, that is, press this button once at the beginning of the section (A), and press it again at the end of the section ( B), this player will automatically return to A and starts to repeat playing the section from A to B. Press the button again to exit. TITLE If the played DVD disc contains a directory column, press the Title button to take out the items contained in this disc.
BASIC OPERATION ANGLE SELECTION In play status, repeatedly press Angle button, you can enjoy the same action shot in different angles. (The function depends on the discs.) VOLUME ADJUSTMENT You can press the VOL+/- button to turn up or down the volume of this unit. DIRECTION BUTTONS Press the Direction buttons ▲ ▼ ◄ ► to move the cursor to select pictures or menu. PLAY/ENTER Press the Play/Enter button to enable the selected items. CLEAR Press Clear button to cancel the digital you have inputted.
BASIC OPERATION SHORTCUT When play DVD discs, press the Shortcut button to jump over the initial title, menu or warnings. (Only for some discs, subject to the quality or recorded status of the played discs) NUMERIC KEYS 1). While playing songs, press the Numeric Keys buttons to directly select the songs you need. 2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and then pressing a Digital button (1--10).
BASIC OPERATION 2). Press the directive keys ▲▼ to move the cursor to a certain directory, and press Play/Enter button to enter the directory. Press the direction buttons to enter the subdirectory or the file area, select a song with the cursor, press Play/Enter button to play the song. During playing, press or button to select other songs under the current directory.
BASIC OPERATION DVD TITLE MENU SELECTION FUNCTION DVD disc features high capacity, records more than one movie, background data and songs. It is hereby given a name of TITLE, while more sections will be given under each TITLE, which are called Chapters. There are some songs in one chapter. While playing DVD discs, press the Title button, the TITLE menu will appear on the TV screen. (Available for DVD discs that contain more than one title menu).
BASIC OPERATION FM/AM RADIO OPERATION 1. Enter FM/AM Function In the turn-on or playing status, press the FM/AM button on the remote control to enter FM/AM status. 2. Select Bands 1) Directly input frequency: press the T/F button on the remote control, input the frequency that you want directly. 2) Select band by pressing Tune- or Tune+ button: under some frequency, press the button, the frequency will be up or down on the step. The step of FM is 0.05 MHz. The step of AM is 9 KHz.
DVD MENU SETUP Press the Setup button on the remote control to open the menu setup function, the TV screen will display the following figures. Press ◄ ► buttons to move the different setup pages; Also press the direction buttons to move cursor to the item you want, then press Play/Enter button again to enter the subdirectory. 1. General Setup Page 1) TV Display (4:3 PS, 4:3 LB, 16:9) (1) No matter which format you select, if the screen is 4:3 display, the image is able to be display in 4:3.
DVD MENU SETUP 2. Audio Setup Page 1) Analog Audio Setup (1) Downmix LT/RT: audio output from Left and Right channel Stereo: stereo audio output (2) Dialog: the dialog of this unit is set to be off. 2) Digital Audio Setup (1) Digital Output When playing the DOLBY, or MPEG disc, the optical or coaxial terminal will be output in SPDIF/RAW format. Meanwhile the connected amplifier must be able to decode the DOLBY DIGITAL or MPEG.
3. Video Setup Page 1) Video Output This option is used to set the mode of video output: S-video, YUV/Y.Pb.Pr, RGB. 2) TV Mode This option is used to select the scan mode to Progressive or Interlace. (This option is unavailable when the S-video output mode is selected.) 3) Color Setting You can adjust the video output of sharpness, brightness, contrast, gamma, hue, saturation according to your favor. The adjustable range of sharpness is: High, Medium and Low.
4. Preference Setup Page (This setup page only be available when the player in No Disc or Eject status; or in playing status, press the STOP button twice.) 1) TV Type Select the corresponding TV system to fit your system; PAL, MULTI, NTSC system are available of this device. 2) PBC This option is used to open or close PBC. 3) Audio (Language) Select the desired audio language (English, French, German, Spanish and Dutch.
5. Password Setup Page Password The original password of this unit is “138900” and you can change it to a new one. 6. Exit Setup Page In this option, press the PLAY/ENTER button to exit the Setup menu; you can also pres the SETUP button on the remote control to exit.
SPECIFICATION Disc type DVD, DVCD, VCD, SVCD, CD, CD-R, MP3, MPEG-4 Video format MPEG2 for DVD, and MPEG1 for VCD Audio format MPEG1, MPEG2, PCM, Stereo Signal output Video format: NTSC, PAL, AUTO Video output: 1,0 Vp-p Audio: stereo,2V (RMS) Output Joint Video-output,Audio-output,Chromatic aberation output, S-video output,Optical fiber output, Coaxial output, Scart output Input Joint USB, Multi-media card Power supply ~230 V/ 50 Hz Max.
TROUBLESHOOTING Please use the following methods to solve the following problems while using this unit.
