ENGLISH PORTABLE DVD PLAYER OWNER`S MANUAL MODEL NO :DVP-722 16:9 / 4:3 REVERSE MODE UP DOWN ENTER Please read this manual before operating MPEG4 UNIVERSAL SERIAL BUS SD/MMC/MS CARD
Table of Contents Table of Contents.......................................................................................................................................................................1 Safety Information......................................................................................................................................................................2 Remote Control............................................................................................................
Safety Information Please read all of the safety and operating instructions before operating this Player, follow all warnings placed on the Player and in the user's manual. These safety and operating instructions should be retained for future reference. Safety Information Do not expose the system to excessive moisture, rain, sand, or heat sources. Place the DVD Player on a firm, flat surface. Keep the DVD Player away from domestic heating equipment and direct sunlight.
Remote Control Remote Control STANDBY MENU/PBC 1 14 DISPLAY MUTE P/N L/R ANGLE LANGUAGE SUBTITLE TITLE 15 16 2 17 3 4 18 5 1 2 3 4 5 6 7 8 9 0 10+ 6 7 SLOW 19 8 ENTER SETUP 20 9 21 22 23 10 REPEAT MARK GOTO 24 25 ZOOM 11 12 REMOTE CONTROL 13 1.MENU/PBC Button Brings up the disc menu. 2.L/R Button Selects left, right and stereo sound tracks. 3.P/N Button Selects PAL/NTSC TV systems. 4.TITLE Button 5.SUBTITLE Button Selects the subtitle's language. 6.
Description Right View Front View 4 1 5 2 6 7 8 9 10 3 11 1.(16:9/4:3)/REVERSE/MODE/ DOWN/UP 2.OPEN 3.DISC COVER 4.LCD 5. LCD on/off switch 6.SPEAKER 1 7 8 9 10 2 3 7.CURSOR(UP/DOWN/LEFT/ RIGHT), ENTER( ) 8.MENU/PBC 9.STOP 10.PAUSE/STEP 11. PLAYBACK BUTTONS PLAY FAST REVERSE FAST FORWARD SKIP-FORWARD SKIP-PREVIOUS 1.OPEN 2.EARPHONE / SPEAKER VOLUME 3.EARPHONE JACK 4.DC IN 12V 5.POWER ON/OFF Bottom View Left View 3 4 5 4 5 6 1 1 2 2 1.LED LIGHT 2.REMOTE CONTROL SENSOR 3.3-in-1 card slot 4.
Using the Remote Control Installing the battery Using the remote control Point the remote control directly at the remote sensor on the front of the DVD Player. 1. Press the locking tab in the arrow direction. (1) 16:9 / 4:3 REVERSE UP MODE DOWN (2) ENTER 2. Pull out the battery tray. o 30 o 3 0 MENU STAN /PBC DBY L/R P/N MUT DISP (3) TITL UAG E SUB TITL E E LANG 3. Insert a 3V lithium battery into the tray with the polarity ( + ) facing up as marked.
Connecting Earphones to the DVD Player You can attach an earphone with a stereo mini-jack plug to the phone jack ( ) for private listening. Its volume is adjustable using the VOLUME control dial. You can also connect a second earphone to the AUDIO OUT jack, but its volume cannot be adjusted. Note: When the earphone is connected to the Phone Jack ( ), the speaker will be disconnected.
Connecting to an External Component You can enjoy video from VCR or camcorder on your DVD player. 1. Turn off DVD player, VCR and other components. 2. Connect the audio and video cables as illustrated below. 3. Slide INPUT/OUTPUT to INPUT. 4.Turn on power.
Connecting to a TV You can enjoy DVD quality video on TV screen. 1. Turn off DVD player and other components. 2. Connect the audio and video cables as illustrated below. 3. Slide INPUT/OUTPUT to OUTPUT. 4.Turn on power. 5.Repeatedly press TV/Video button on your TV to select the input from the DVD player.
Connecting to a Stereo Component By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection. 1.Turn off both DVD player and your stereo system. 2.Connect the SPDIF to your stereo system as illustrated below. 3.Slide INPUT/OUTP to OUPUT. 4.Turn on power of DVD player.
Using Card Reader The player has a 3-in-1 card reader, accepting MMC(Multimedia card), SD (Secure digital card) and MS (Memory stick). Inserting a memory card 1.Make sure that no disc is placed on the Player. 2.Insert the card into the slot with the gold contacts facing up. Gently push the card in all the way until the card is fixed in place. WARNING: Be careful not to insert the card in the wrong direction, or it is forced in, the card may be damaged, or data on the card may be lost or corrupted.
Using USB Port The player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USB in this player is version 2.0. USB slot Pluging a USB device 1.Remove the disc from the player. 2.Plug in the USB device to the USB port on the player. Removing a USB device You can remove the USB device anytime even it is playing. To remove the USB device, simply grasp the end of the USB and remove it from the slot. Playing a USB device 1.
Using the AC Adaptor This portable DVD player can be powered by AC through the supplied switching power AC adaptor. It can also use the supplied battery pack to power. When the AC adaptor is connected to the unit and powered, the unit will be automatically powered by the AC power. AC adaptor Power cord To home power outlet To DC12V IN on the DVD player Important ! Always turn off the DVD Player before connecting or disconnecting the AC cord. Only use the AC adaptor supplied with this Player.
Using the Battery Pack Installing the battery pack Removing the battery pack <1>.Align and insert the battery <2>.Slide the battery pack to the pack into the corresponding left until it clicks into place. slots on the back of the unit. <1>.Slide down the latch. <2>.Slide the battery pack to the right, and remove. Charging the battery pack 1. Attach the battery pack to the Player. 2. Use the AC adapter to charge the battery pack. Make the connection as illustrated below. 3.Slide POWER to ON.
Cautions in Using Battery Pack Danger! Strictly follow these safety information when using the battery pack, otherwise, a short circuit, overheating, smoke, fire, or damage to the product may result. Never disassemble or modify the battery pack in any way. Do not touch the terminal of the battery pack with a metal object. Do not place the battery pack in direct sunlight, dashboard of a vehicle, or high temperature place. It can cause explosion or fire. Do not expose the battery pack to water, fire, or heat.
Playing a Disc Turning ON /OFF the player To Turn On The Player 1.Slide POWER on the Player to ON, this will put the Player on standby mode. 2.Press on the Player to turn on the power. 3.You can also press STANDBY on the remote control to turn on the power. To put the Player on standby mode Press STANDBY on the remote control. To Turn Off The Power Slide POWER on the Player to OFF. Preparation for Playback 1.Make sure the unit has the power either from the battery pack or the AC adaptor. 2.
Playing a Disc Resume This Player provides a unique resume function for making viewing movie more convenient. Follow these steps 1.When you want to interrupt the playback and come back later to play where you interrupted it, you can press OPEN on the Player to open the disc compartment cover. 2.You can now turn off the power, put it on standby, or even remove the disc from the Player, and when you play the same disc next time, the disc will play from where it was interrupted.
Playing a Disc Repeat Playback You can play a chapter, a track, a title, a file or the entire disc repeatedly. 1.During playback, repeatedly press REPEAT to choose a Repeat option. Depending on the type of disc,the Repeat options may be different. 2.To cancel repeat playback, repeatedly press REPEAT until " REP:[ OFF ] " appears on the screen. Mark (Bookmark) The Mark function lets you select parts of a DVD so that you can quickly find the section at a later time.
Playing a Disc ZOOM 1.Press ZOOM repeatedly during playback or pause to enlarge (2X, 3x, 4x, ) or reduce (1/2, 1/3, 1/4) the image. 2.Use direction keys ( and ) to move around (pan and scan) the enlarged image. MUTE 1. Repeatedly press MUTE until " MUTE " appears on the display to silence the audio. Press MUTE again to turn on audio. MENU/PBC Press MENU/PBC to return to the dis c's Start Menu if it has the Start menu, if not, " INVALID KEY " appears.
Playing a Disc TITLE Press TITLE, it takes you to the very beginning of the title and play, or to the MENU if it has title menu. DISPLAY Repeatedly press DISPLAY during playback to display various playback information such as current title, chapter, track elapsed time, languages etc. L/R This function is mostly used for karaoke (sing along) discs, by repeatedly pressing L/R, you can select STEREO, MONO L, MONO R. P/N This is used when you connect the Player to a TV and watch video on the TV.
Playing MP3 and Regular Audio CD Valid MP3 CD and CD-R/RW The MP3 files should be ISO9660 or Joliet format. Use " mp3 " as the file extension. Play In most cases, when a MP3 or CD is placed into the player, the first song file of the first folder palys. In other cases, the file manger appears. Use direction keys ( and ) to select the song file and press Play control to play.
Playing Picture CD Valid Picture The player can play both Kodak Picture CD that you order from photo processing store, and home-made CD by burning JPEG files onto a CD-R or CD-RW disc. Play In most cases, after the disc is placed into the player, the first file will be shown. In other cases, the file manger appears. Use direction keys ( and ) to select the picture and press ENTER to view one picture or press PLAY the Player or on the remote control to start the slide show ( plays photos automatically).
Setting TV system, Screen Saver, TV type (4:3/16:9), Password, Rating, Default 1.Press SETUP on the remote control. TV type 4:3 or 16:9 2.Use the direction keys( ) to select SYSTEM SETUP and its sub-menu. 3.Press ENTER to confirm your selection. 4.Press SETUP to exit, or select EXIT SETUP to exit. STANDBY MENU/PBC DISPLAY MUTE P/N L/R ANGLE LANGUAGE SUBTITLE TITLE 1 2 3 4 5 6 7 8 9 0 Selecting TV system 4:3 LB (Letter Box) Displays the content of the DVD title in 16:9 aspect ratio.
Setting TV system, Screen Saver, TV type (4:3/16:9), Password, Rating, Default STANDBY STANDBY DISPLAY MUTE P/N Setting rating LANGUAGE SUBTITLE TITLE 1 2 3 4 5 6 0 7 ENTER SETUP MARK GOTO MUTE P/N L/R ANGLE LANGUAGE SUBTITLE TITLE Resetting to default setting 1 2 3 4 5 6 7 8 9 0 8 10+ SLOW REPEAT DISPLAY L/R ANGLE 9 MENU/PBC MENU/PBC ZOOM SYSTEM SETUP TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT EXIT SETUP 10+ SLOW 1 2 3 4 5 6 7 8 KID SAFE G PG
Setting Language for OSD, Voice, Subtitle, Menu Although this Player supports a list of different languages for OSD, subtitle and voice, the disc must have the specific language(s) builted-in in order to effect the multi-language function of this Player. 1.Press SETUP on the remote control. 2.Use the direction keys( ) to select LANGUAGE SETUP and its sub-menu. 3.Press ENTER to confirm your selection. 4.Press SETUP to exit, or select EXIT SETUP to exit.
Setting Audio Output 1.Press SETUP on the remote control. 2.Use the direction keys( ) to select AUDIO SETUP and its sub-menu. 3.Press ENTER to confirm your selection. 4.Press SETUP to exit, or select EXIT SETUP to exit. STANDBY DISPLAY MUTE MENU/PBC P/N L/R Changing AUDIO output LANGUAGE SUBTITLE 1 2 3 4 5 6 7 8 9 0 ANGLE TITLE 10+ AUDIO SETUP AUDIO OUT SLOW ENTER SETUP REPEAT MARK GOTO EXIT SETUP SPDIF/OFF SPDIF/RAW SPDIF/PCM ZOOM REMOTE CONTROL MODEL No.
Setting Video's Brightness, Contrast, Hue, Saturation 1.Press SETUP on the remote control. 2.Use the direction keys( ) to select VIDEO SETUP and its sub-menu. 3.Press ENTER to confirm your selection. 4.Press SETUP to exit, or select EXIT SETUP to exit.
Adjusting LCD Screen Following these steps to adjust the LCD quality during playback or while paused. 1.Repeatedly press MODE on the screen panel to select the parameters listed in the menu. You can change BRIGHTNESS, CONTRAST, SATURATION and HUE. 2.Repeatedly press (or hold down) UP and DOWN to change the setting of the parameter selected. 3.To reset the setting to its defaulted value, select RESET by repeatedly pressing MODE then press UP or DOWN to confirm.
Troubleshooting If your DVD player dose not seem to be functioning properly, check the items below before you contact a service center. Symptom Check Power does not turn on or suddenly turns off Make sure the AC Power cord is securely plugged into an AC outlet. Turn the power off and then back on. Battery pack is in place but the power does not turn on or suddenly turns off Check that the battery pack is charged. If not, recharge it.
Troubleshooting Symptom Check While in the input mode, no picture is output from the external component to the DVD player Check that the DVD player is in the INPUT mode and in the DVD mode. Battery pack won't charge Check that the DVD player is turned on. Check that the video or audio cable is securely connected. You cannot charge the battery pack with the player turned off. A hot battery pack may take longer to charge. Wait until the battery pack is sufficiently cooled down.
Specifications General Power Requirements Input AC 100V~240V, 50/60 Hz, Output DC 12V Power Consumption > 15 W Weight 880g (without battery pack) Dimensions Operating Temperature Range 206mm ( W ) x 158.5mm ( D ) x 40.
