Specification Sheet

NEW Integrated Tactile Switch Kit Introduction and Installation Sheet
NEW Standard Integrated Tactile Switch Kit Single
12 & 24-Volt Single Actuator Systems - 124SSR-ISK
NEW LED Indicator Integrated Tactile Switch Kit Single & Dual
12 & 24-Volt Single and Dual Actuator Systems - 123SC-ISK
Align the center bit of a 2 1/16” (52.39 mm) hole saw with the cross hairs in the center of
the desired mounting area and drill straight down through the console, providing additional
clearance for switch and electrical connection. Insert the switch into the console cutout
hole then tightly screw the Bezel Locknut clockwise onto the backside of the key pad.
NOTE:
This switch has the control box
integrated into the back of the
switch Key Pad. There is
no external control box
for this kit. Wiring
harness is 30”
(76.2 cm)
in length from the end
of the switch bezel.
Key Pad Dimensions & Installation Instructions
THIS NEW SWITCH TECHNOLOGY IMPROVES ACCURACY AND INTEGRATES THE CONTROL BOX FUNCTIONALITY INTO THE KEY PAD BEZEL
LENCO ESTIMATES TO START SHIPPING THIS NEW SWITCH KIT TO AFTERMARKET CUSTOMERS NO LATER THAN SEPT 1, 2016
2.75”
(7 cm)
4.43”
(11.25 cm)
4.08”
(10.36 cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
4.43”
(11.25cm)
4.08”
(10.36cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
2.68”
(6.8 cm)
2.33”
(5.9 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
4.43”
(11.25 cm)
4.08”
(10.36 cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
4.43”
(11.25cm)
4.08”
(10.36cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
2”
(5.08 cm)
2.42”
(6.15 cm)
2.68”
(6.8 cm)
2.33”
(5.9 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
2.75”
(7 cm)
06/16/16
See the Lenco Marine owners
manual for complete switch
mounting
instructions.
lencomarine.com/ownersmanual
This switch has the control box integrated
into the back of the switch Key Pad.
NO MORE EXTERNAL CONTROL BOX
This switch has the control box integrated
into the back of the switch Key Pad.
NO MORE EXTERNAL CONTROL BOX
Part# 15169-001 (shown)
Part# 15170-001
(shown)
ATTENTION: REPLACEMENT KEY PADS AND CONTROL BOXES FOR 2016 AND PRIOR SWITCHES ARE NOT COMPATIBLE WITH THESE NEW SWITCH KITS.
PLEASE REFER TO OUR LENCO CATALOG AND / OR LENCOMARINE.COM FOR REPLACEMENT PARTS FOR OUR OLD-STYLE AND NEW-STYLE SWITCH KITS.
Part# Description
15169-001
Standard Integrated Switch Kit with Pigtail
for Single Actuator Systems
Part# Description
15170-001
LED Indicator Integrated Switch Kit w/Pigtail
for Single Actuator Systems
15171-001
LED Indicator Integrated Switch Kit w/Pigtail
for Dual Actuator Systems
A vailable kit for this series:
A vailable kits for this series:
Aftermarket New Product Bulletin #1 Fall 2016
+
Wiring harness length
30” (76.2 cm)
Wiring harness length
30” (76.2 cm)