D 3045 Hybrid Digital DAC Amplifier Owner’s Manual ENGLISH ®
IMPORTANT SAFETY INSTRUCTIONS ENGLISH 1. Read instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
23. Battery Disposal - When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. 24. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 25. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
GETTING STARTED ENGLISH UNPACKING AND SETUP WHAT’S IN THE BOX Packed with your D 3045 you will find: • Detachable mains power cord • AMP 3 remote control with 3V CR2025 battery • Eight pieces of dome-shaped feet • Quick Setup Guide SAVE THE PACKAGING Please save the box and all the packaging in which your D 3045 arrived. Should you move or otherwise need to transport your D 3045, this is by far the safest container in which to do so.
ENGLISH IDENTIFICATION OF CONTROLS 1 6 7 8 PHONO (MM) 9 LINE 1 10 LINE 2 PRE / SUB OUT COAXIAL 100-120V~60Hz / 220-240V~50Hz 2 3 HDMI ARC OPTICAL 1 OPTICAL 2 11 COMPUTER 12 13 14 +12V TRIGGER IN 15 16 17 4 5 1 o (STANDBY) • With the corresponding end of the mains power cord connected to the AC mains input of the D 3045 and the plug connected to a mains power source, press o (Standby) to switch ON the D 3045 from standby mode.
IDENTIFICATION OF CONTROLS ENGLISH 10 PRE/SUB OUT • These full range output terminals have dual function. They are used either as PRE-OUT or SUBWOOFER OUT terminals. • The D 3045 and associated external devices must be turned OFF always before connecting or disconnecting anything to the PRE/ SUB OUT sockets. PRE OUT • The PRE/SUB OUT sockets make it possible to use the D 3045 as a full range preamplifier to an external power amplifier.
ENGLISH IDENTIFICATION OF CONTROLS AMP 3 REMOTE CONTROL 1 1 4 2 3 5 BASS DIM 6 7 AMP 3 1 ON: Power up unit from Standby mode to operating mode. OFF: Switch unit to Standby mode. 2 SOURCE d/f: Select through source input selections. 3 DIM: Toggle to select display brightness level – dim, bright or display turned off. 4 MUTE: Audio is temporarily switched off or restored. Restore audio by pressing MUTE again, VOL d/f or rotating VOLUME knob. 5 VOLUME d/f: Increase or decrease loudness level.
OTHER FEATURES ENGLISH ABOUT QUALCOMM aptX™ HD MASTER QUALITY AUTHENTICATED A Bluetooth connection is a bit like a data pipeline between devices. Because the pipeline has a maximum width, it can sometimes be difficult to flow large audio files through it. aptX® reduces the size of the audio files so they can be squeezed through the wireless pipeline without affecting the sound quality.
5 ENGLISH OTHER FEATURES 11 12 Run foobar2000. Go to File $ Preferences $ Components. Confirm that “WASAPI output support” is already installed. 6 7 13 Go to “Playback” tab. Under “Replay/Gain”, ensure that both “Source Mode” and “Processing” are set to “None”. Select “Apply” to confirm the setting. 8 9 Download the WASAPI output plug-in for Foobar2000 from www.foobar2000.
OTHER FEATURES ENGLISH 15 The column header for sample-rate is not standard. Manually input sample rate as shown below. File $ Preferences $ Display $ Default User Interface $ Playlist View $ Custom Columns $ Name $ Sample Rate $ Pattern $ %samplerate% $ OK 18 With D3045 as the default speaker, go to “Properties” and then “Advanced”. Ensure that both options under “Exclusive Mode” are selected. 16 Activate Sample Rate in the playlist view by selecting any spot in the header and right click.
AUTO STANDBY TV CONNECT The D 3045 can be setup to automatically go to standby mode if there is no user interface interaction and no active Source input within 30 minutes. Auto standby mode can be enabled or disabled by the following steps. TV Connect is a new software enabled feature that allows the D 3045 to provide the sound for your TV. TV Connect enables D 3045 to learn the mute and volume control commands from any TV remote control.
OTHER FEATURES ENGLISH PERFORM IR LEARNING WITH TV REMOTE CONTROL Direct or point the D 3045 or TV remote control to the D 3045 front screen when performing below procedure. IR LEARNING PROCEDURE STEP** PROCEDURE 1 Press and hold [MUTE] of AMP 3 remote control to initiate IR learning mode. 2 Press [ON] of AMP 3 remote control. 3 Press [ON] of TV remote control. 4 Press again [ON] of TV remote control. 5 Repeat Steps 2 to 4 to learn “Volume +”, “Volume - “ and “Mute” controls.
58,0 FEET INSTALLATION GUIDE The dome-shaped feet are supplied for optional installation. There are two ways of installing the feet as per suggested methods below. You may generate a template for proper placement of the feet. 184,5 58,0 NOTE Ensure that with the feet installed, the D 3045 is stable, balanced and will not tip over.
SPECIFICATIONS ENGLISH All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter. PREAMPLIFIER SECTION GENERAL SPECIFICATIONS LINE INPUT/PRE OUT LINE INPUT/SPEAKER OUT THD (20 Hz – 20 kHz) <0.003 % at 2 V out Signal-to-Noise Ratio >100 dB (IHF, A-weighted, ref. 500 mV out, unity gain) >85 dB (1 kHz) Channel separation >80 dB (10 kHz) Continuous output power into 4 and 8 ohms THD (20 Hz – 20 kHz) 60 W (ref.
ENGLISH
www.NADelectronics.com ©2018 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.