MSY2 ALL-IN-ONE MUSIC SYSTEM
Table of content 1. Introduction …………………………………………........ 3 1.1 Safety ………………………………………............ 3 1.2 Features ……………………………………...……..... 5 1.3 Carton contents ………………………………………............. 5 2 Controls, connectors and display ………………………………………………..6 2.1 Main controls ……………………………….........................6 2.2 Connectors ……………………………….........................7 2.3 Remote control ……………………………………….…........7 3 Started and setup ………………….,…………….………...…....
1. Introduction 1.1 Safety Instructions Please store this instruction manual for future reference. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. • WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable.
• Clean only with a dry cloth. • Unplug this product from the wall outlet before cleaning. • Place the unit on a solid surface. • Do not put it in a closed bookcase or a cabinet that may keep air from flowing through its ventilation openings. • Do not install near any heat sources, such as radiators, heat registers, stoves or other appliances that produce heat. • Protect the power cord from being walked on or pinched, particularly at plugs and the point where they exit from the product.
player. • CDs with severe scratches may not play properly. • Do not insert anything except a CD inside the loading slot. • In the rare event you experience an error, unplug the power cord for 60 seconds and then plug it back in firmly. 1.2 Features This manual describes how to use the MSY2: • DAB/DAB+ digital radio with a wide choice of channels and digital quality sound broadcast free-to-air • FM with RDS (Radio Data System) • Bluetooth - streaming music and control from Smart device.
2. Controls, connectors and display 2.1 Main control 1. Alarm button 2. SOURCE：Press to Source to select different modes DAB, FM, Bluetooth, Aux in, CD and USB playback 3. SLEPP: Press to set the sleep 4. Menu/Back button BACK: press the BACK to return to the previous screen. MENU: press the MENU to show the MENU for the current mode. Press again to show now playing screen 5. INFO: Info button 6. Presets button 7.
13. CD/Bluetooth skip next/Tune+button 14. CD stop and eject button 15. CD slot 16. TFT color Display 2.2 Connectors As shown below has connectors (from left to right) for the following: 2.
1. 1, 2, 3, 4, 5, 6, 7, 8, 9,10: Short press to preset the stations. For the 10+, it needs to long press the 10+ and then short press the 1-9 to get the 10+ preset number 2. : Press to play / pause the playing BT mode and CD mode. Auto Scan stations under DAB and FM mode. 3. : Press to stop CD playback, press again for CD ejection. 4. / : Press to volume up or volume down in playing screen. Press up or down to select menu for settings. 5. / Press right or left to select mode.
3. Started and setup MSY2 is easy to use by the below 3 steps: a. Place the MSY2 on a suitable shelf or table; b. Extend the telescopic antenna; c. Connect the power adapter between MSY2 and the mains supply and press the Power/Volume dial to turn the device on. Set Time/Date (wizard) The time and date can be updated manually or automatically. With auto-update, the time and date are automatically synchronised with national time signals broadcast over DAB and FM (when available).
Manual set If you set No update, the wizard now prompts you to set the time and date manually. The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with the first value, dd, active (flashing). Adjust each value with the Select control. As each value is set, the next value becomes active and flashes. 12/24 hour display To change between 12 and 24 hour display, select Set 12/24 hour and then select your preference. 4.
To remove stations that are listed but unavailable, select Menu > Prune invalid. 4.1 Selecting stations To listen to or change a station, turn the Select control to view a list of stations and press to select. Once selected, the station plays and the screen shows information about the station, track or show as broadcast. Presets To store a DAB preset, press and hold Presets until the display shows the Save preset screen. Select one of the 20 presets (on the remote) to save the currently playing station.
broadcast. 5. FM radio mode FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information about the station and show (where broadcast). To enter FM mode, please refer the below steps: 1) Press ‘Source’ button to enter Audio Source Menu and use/rotate ‘Navigation’ dial to select FM 2) To automatically scan for station, long press Tune +’ or Tune -’ button. 3) To manual tune in 0.05MHz increments press Tune +’ or Tune -’ button.
If no RDS information is available, the currently tuned frequency is shown. 6 AUX mode Aux in mode plays audio from an external source such as an MP3 player. To play audio with Aux in mode, 1).Connect the external audio source to the Aux In (RCA) stereo socket. 2). Either press Source and select AUX in 3). Adjust the volume of MSY2 (and, if necessary, the audio source device) as required. 7. Bluetooth mode Prior to pairing, verify your device supports Bluetooth 5.
drive, Select Source> USB. Browsing folders From this point on, menus are generated from the folders on the USB device. Browse folders with the Select control and Back button. The display shows folder and file names (not necessarily track names). 9. CD Playback Notice! Improper operation can result in material damages! Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into the CD player. These may not be played and ejected correctly.
10. Alarms and sleep 10.1 Alarms To set or change an alarm, press Alarm button Select the alarm number (1 or 2) then configure the following parameters: Alarm: on/off, Frequency: Daily, Once, Weekends or Weekdays, Time:0-max Source: Buzzer, DAB, FM Duration: 15/30/45/60/90/120 Volume: 0 - max. To activate the new settings, scroll down and select Save. The screen shows active alarms with an icon at the bottom left. At the set time, the alarm will sound.
11. Factory reset A factory reset resets all user settings to default values, so time/date, and presets are lost. However, the radio’s current software version is maintained. To perform a factory reset, select Menu > System settings > Factory reset proceed >Yes. 12 Troubleshooting and error messages 12.
12.2 Troubleshooting Problem Cause Solutions FM: Hiss Low signal Check/move antenna DAB: strength Move radio burbling/intermittent Rescan local (high-strength) stations only cut-out For DAB, check local coverage at www.ukdigitalradio.
13 Technical Specification： Model: MSY2 ALL-IN-ONE MUSIC SYSTEM Type: CD/DAB/DAB+/FM/AUX/Bluetooth Music system Speaker: 1 x 3” (full range) Power: RMS 15W Power Supply: 12V/2.5A power adapter Dimension (mm): 200W x 160H x 280D Weight: 3.0 KG Specifications are subject to change without notice If you have any questions or suggestions, please share with us. info@lemegaaudio.com www.lemegaaudio.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
