Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Important Safety Instructions CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
Important Safety Instructions 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Safety Instructions UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS PRODUCT. Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Safety Instructions MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. The images in this manual are for reference only and they may appear different from the actual items.
Accessories List The following items are included with your GPS unit. ITEM NAME QTY Car Adaptor 1 Mounting Bracket 1 Mounting Cradle 1 Stylus 1 USB Cable 1 User’s Manual 1 NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements.
Contents Important Safety Instructions …………………………………..……..…..1 Accessories ……………………………….……….…....5 View of Main Unit ……………………………….………..…...7 System Connections ………………………………..…………....9 Power supply Preparation ……………………………….…….….…10 Use of the Mount Accessories …………………………….…….….…….11 Troubleshooting ……………………………….……….…..12 Specifications …………………………….……………...
View of Main Unit 1. LCD Screen Finger touches the screen directly or use the stylus included for optional. 2. Charge Indicator When charging the battery, it is red. W hen the battery is fully charged, it turns green. 3. POWER Button Press for a longer time to enter or exit the standby mode. 4. ON/OFF Switch Used to switch power on or off. 5. Card Slot Insert the SD card into the slot. 6. Earphone Jack Connect earphone for private listening.
View of Main Unit 8. Speaker NOTE: In order to acquire good GPS signals, make sure the area with built in GPS Antenna of the unit is not obstructed by something(such as heat insulation paper) and has a clear view of the sky. And you’d better to position the unit with its GPS antenna area slightly upward inclinded.
System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Inserting SD Card The unit is designed with SD Card slot which allows you to insert the SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. The card unlocks and protrudes slightly. You can now remove the card.
Power Supply Preparation Using the Car Adaptor The unit is supplied with a Car Adaptor for powering while in a vehicle. Connect the Car Adaptor Power Plug to the unit’s USB charging port and plug the other end to the vehicle’s 12-24V accessory cigarette socket, as shown below. Attention: Place the unit in a proper position for viewing. Disconnect the unit from the Car Adaptor when starting the vehicle. When connected with adaptor, the LCD screen will be brighter than when it's not charging.
Use of the Mounting Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket and mount cradle) to mount the unit in the vehicle. Take the following steps to operate: 1. See Fig. 1, slide the mount cradle onto the end of the mount bracket to fix it. 2. See Fig. 2. Set the bottom edge of the unit onto the mount cradle. Then push the tap at the top of the mount cradle in arrow 1 direction to mount the unit to the mount cradle.
Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. PROBLEM Users can’t turn the unit on. POSSIBLE CAUSE POSSIBLE SOLUTION The adaptor doesn’t connect well. Connect the adaptor correctly. The built-in rechargeable battery is weak.
Troubleshooting PROBLEM The unit can receive signals now but can’t then or signals received are not stable. POSSIBLE CAUSE POSSIBLE SOLUTION The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. The unit may be obstructed by veil, such as heat insulation paper. Remove the veil. Swing of the unit is too great. Avoid great swing of the unit. System software of the unit fails to function after a change. Turn the unit on again.
Specifications TFT screen size 4.3 inches Frequency Response 20Hz - 20kHz Audio Signal-to-noise Rate ≥65dB Audio distortion+noise ≤-20dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) Power DC 5V Power Consumption < 8W Dimensions 118mmX78mmX16mm (L*W*D) Weight About 0.16Kg Design and specifications are subject to change without notice. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exit.
