User Manual

ManualsBrandsLeica Geosystems ManualsElectronicsRemote Control Radio

Table Of Contents

User Manual

For CT100

29. Aug. 2012

1 of 8

INTRODUCTION ................................................................................................................................................... 2

2 ELECTRICAL INTERFACE .................................................................................................................................. 3

2.1 Maximum Ratings ...................................................................................................................................................... 3

2.2 Operating Conditions ................................................................................................................................................. 3

2.3 Connector .................................................................................................................................................................... 3

3 UART CONFIGURATION ..................................................................................................................................... 4

4 MODULE MOUNTING .......................................................................................................................................... 4

5 RADIO MODULE COMMAND SET ...................................................................................................................... 5

6 RADIO MODULE CONFIGURATION ................................................................................................................... 7

7 CERTIFICATION ................................................................................................................................................... 8

7.1 FCC Certification ....................................................................................................................................................... 8

CONFIDENTIAL

Date / Editor Version / Comment

5-JULY-12 / WMART Document creation

Summary of content (8 pages)

PAGE 1
User Manual For CT100 29. Aug. 2012 1 2 2.1 2.2 2.3 3 4 5 6 7 7.1 INTRODUCTION ...................................................................................................................................................2 ELECTRICAL INTERFACE ..................................................................................................................................3 Maximum Ratings .................................................................................................................
PAGE 2
User Manual For CT100 29. Aug. 2012 1 INTRODUCTION The CT100 radio facilitates a IEEE 802.15.4 based radio communication. It uses a proprietary wireless communication stack to implement a star or cluster network with multiple nodes communicating simultaneously.
PAGE 3
User Manual For CT100 29. Aug. 2012 2 E L E C T R I C A L I N T E R FA C E 2.1 Maximum Ratings Rating Input Voltage VCC Input Current VCC Operating Temperature 2.2 Min. -0.3 -30 Unit V mA °C Operating Conditions Rating Input Voltage VCC Operating Current at 3dBm Maximum RF Output Power 2.3 Max. 3.6 150 60 Min. 2.1 - Typ 3 / 3.3 30 Max. 3.6 7 Unit V mA dBm Connector The radio module is connected through a 10-pin 0.
PAGE 4
User Manual For CT100 29. Aug. 2012 3 UART C O N F I G U R AT I O N Baudrate 19200 Data Bits 8 Stop bits 1 Parity No Flow Control No 4 MODULE MOUNTING The CT100 radio module can be mounted with two 2.5mm machine screws. It is preferred that the screws and stand offs are made of a non conductive and non-ferromagnetic material such as plastic or ceramics. Alternatively the module can be directly soldered on to a carrier board utilizing the radio module using connector J2 and J6.
PAGE 5
User Manual For CT100 29. Aug. 2012 5 RADIO MODULE COMMAND SET The following table lists all commands available to the user through the UART communication. Ref. 1 Group Test Command 0/TEST/CW/n Response 0/OK 0/ERR 0/TEST/RND/n 0/OK 0/ERR 0/TEST/DUTY/hh 0/OK 0/ERR 3 0/TEST/CH/n 4 5 0/TEST/LOOP 0/TEST/END 6 0/TEST/HIST 7 0/TEST/VER 8 0/TEST/BUILD 0/OK 0/ERR 0/OK 0/OK 0/ERR 0/Assert: hhhh 0/Assert: HHHH/HHHHHHHH 0/Assert: hhhh 0/Assert: HHHH/HHHHHHHH ….
PAGE 6
User Manual For CT100 29. Aug.
PAGE 7
User Manual For CT100 29. Aug. 2012 6 R A D I O M O D U L E C O N F I G U R AT I O N The radio module can be configured through filters using the command 0/CONF/FTR/n/hhhhhhhh, whereas n indicates the filter number and h the filter bit mask. Each filter corresponds to a node in the network where as filter 0 is reserved for the radio module configuration.
PAGE 8
User Manual For CT100 29. Aug. 2012 7 C E R T I F I C AT I O N 7.1 FCC Certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.