TIWI Transceiver Module / User’s Guide TIWI Transceiver Module User’s Guide Internal Use only Last Update 24.04.2015 Version: 1.0 Date of version: 24.04.2015 Author: Christian Gerber Path: 15_TIWI UserMan.docx Date 09.04.
TIWI Transceiver Module / User’s Guide Contents TIWI Transceiver Module .........................................................................................................................1 1 2 3 Introduction ......................................................................................................................................3 1.1 Purpose & Scope ......................................................................................................................3 1.2 Audience ..
TIWI Transceiver Module / User’s Guide 1 Introduction 1.1 Purpose & Scope The purpose of this document is to provide details regarding the setup and use of the TIWI transceiver module in Leica Geosystems AG and Hexagon AB. This document will also present application guidance such that the module’s EMC compliance will not be degraded. This Document is for Internal use only. 1.2 Audience This document is intended to be read by engineers and technical management.
TIWI Transceiver Module / User’s Guide 2.2 Integration of the TIWI Module Please look in to the datasheet from LSR. --> www.lsr.com (TiWi-BLE Module) Document Nr: 330-0087 3 EMC Compliance Application Guide 3.1 Introduction The TiWi module has been tested as Modular Radio in accordance with the FCC .The device has been tested to relevant FCC parts and the results of the testing may be found in the module’s test report.
TIWI Transceiver Module / User’s Guide This firmware includes: Binary image ini.ini. configuration file. 3.4 Testing Requirements for End-Product Once the module is integrated and the product realized, the product must be tested and follow the verification process for Unintentional Conducted and Radiated Emissions in accordance to the FCC guidelines. The module is to be placed in the receive mode for this test. 3.5 Marking Requirements for End-Product and Compliance Statements. 3.5.
TIWI Transceiver Module / User’s Guide this list or having a gain greater than 2dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. L'opération est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
TIWI Transceiver Module / User’s Guide Canada ne sont plus considérés comme valides et l'ID de la FCC et IC numéro de certification ne peut pas être utilisé sur la produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'un distincte de la FCC et Industrie Canada l'autorisation. 3.5.4 End Product Labeling The TIWI Module is labeled with its own FCC ID and IC Certification Number.
