Leica DISTO™ with Bluetooth Smart usage on Windows 8 V 1.
The Leica DISTO™ devices with Bluetooth® 2 Leica DISTO™ D3a BT (D330i) Bluetooth® 2.1 Leica DISTO™ D8 Bluetooth® 2.1 Leica DISTO™ D510 Bluetooth® Smart Leica DISTO™ D810 touch Bluetooth® Smart Requires SPP support Requires SPP support Requires Bluetooth® 4.0 Requires Bluetooth® 4.
Overview DISTO™ compatibility Availability Leica DISTO™ sketch *) Leica DISTO™ sketch *) Windows 7 Windows 8 Windows Mobile 6.5 - - - - - - Android iOS - Android 4.3 Leica DISTO™ transfer **) - - - Android 4.3 ****) Leica DISTO™ transfer PPC ***) www.disto.com Leica DISTO™ transfer PC ***) www.disto.com - - - - - - - - - Windows 8.
Prolog This presentation should provide further advice on how to use the Leica DISTO™ with Bluetooth® Smart. Also the corresponding Apps for iOS and Android are described in this document. For further information regarding using Bluetooth® 2.1 please use the document at following link: http://ptd.leica-geosystems.com/en/Leica-DISTO-D8_78069.
Leica DISTO™ Bluetooth Smart Getting started
General Bluetooth® Smart Bluetooth® Smart is compatible with Bluetooth® 4.
Leica DISTO™ D510 Bluetooth® Smart The Bluetooth® can be switched off in the Settings of the Leica DISTO™ D510 The Leica DISTO™ D510 only supports the connection to iOS or Android 4.
Leica DISTO™ D810 touch Bluetooth® Smart 8 The Bluetooth® can be switched off in the Settings of the Leica DISTO™ D810 touch
Leica DISTO™ D810 touch Bluetooth® Smart The Leica DISTO™ D810 touch provides 3 different modes for use with Bluetooth® Keyboard Spreadsheet – Mode Go to Bluetooth® Settings E.g. 7.123 decimal numbers Keyboard Text – Mode E.g. 7.123m 2‘2“13/32 TAB: sends a Tabulator after each value Enter: sends a Enter after each value none: only value will be sent 0.
Keyboard Mode Windows 8 or higher Getting started
Keyboard Mode for Windows 8 How to start This mode is only supported by the Leica DISTO™ D810 touch Please use the Bluetooth® manager to pair the devices. Once the Windows 8 device and the Leica DISTO™ are paired they will immediatelly connect if both are switched on. The Leica DISTO™ will be considered as a keyboard. So by sending a measurement the Windows 8 device believes you are writing the value on a keyboard.
Keyboard Mode for Windows 8 How to start Select „Change PC Settings“ 1. Select „Devices“ 12 Instrument should be listed as paired device Select „Bluetooth“ 2.
Keyboard Mode for Windows 8 How to start You need to either set the DISTO™ D810 touch to following modes (see also page 9 of this presentation) 13 Spreadsheet mode: Use for sending decimal values without unit for further calculation Text mode: Use for sending values an on the device display incl.
Keyboard Mode for Windows 8 How to send data and navigate in a Program After the devices are connected the favorite keys will change for sending measurement values or navigation If switched on the Arrow keys on the DISTO™ can be used for navigation on e.g.
Keyboard Mod for Windows 8 Good to know If you want to unpair device to prevent automatic detection either switch off Bluetooth® at DISTO™ or press „Remove device“ in the settings of the Windows 8 device. To Remove a device in Windows 8 proceed to the same menu like for adding a device.