BLE Module MBP00 Datasheet V1.
BLE Module MBP00 Datasheet V1.0 Version History Revison Amendment V1.0 Initial version Date Author 2022.10.
BLE Module MBP00 Datasheet V1.0 Contents 1.Description .......................................................................................................................................4 1.1Overview ................................................................................................................................4 1.2 RF Feature .............................................................................................................................4 1.
BLE Module MBP00 Datasheet V1.0 1.Description 1.1Overview This is UART to BLE 5.0/5.1 module. It is composed of a highly wireless chip with Arm Cortex-M0, internal 512 KB Flash and 64KB SRAM. The antenna is build-in PCB with 2dbi gain. It has high stability and ultra-low sleep power consumption, about 1.1uA in deep sleep model. For the ice water meter, the module supports the low power management, it can work over 10 years with battery.
BLE Module MBP00 Datasheet V1.0 Shutdown Power Consumptoin:700 nA (GPIO Wake Up) 1.4Security AES Security Module(64/128/192) Elliptical Curve Cryptography(256) Triple Data Encryption Standard(T/DES) True Random Number Generator(RNG) Application layer Security via App 1.
BLE Module MBP00 Datasheet V1.0 2.Pin Description 2.1Pin Diagram 2.2Pin Definition No. Pin name Description 1 / / 2 / / 3 / / 4 PB13 GPIO/ADC Channel 1 5 PB14/BOOT GPIO/BOOT Control 6 PB15 GPIO/Wake Up 7 PA00 GPIO/ADC Channel 4/Wake Up 8 GND GND 9 3V3 Chipset 3.
BLE Module MBP00 Datasheet V1.0 10 / / 11 / / 12 / / 13 / / 14 / / 15 / / 16 / / 17 PB01_RX1 GPIO/UART1_RXD 18 PB00_TX1 GPIO/UART1_TXD 19 / / 20 / / 21 / / 22 / / 23 RST RST 24 PB06/SWCLK SWD-SWCK 25 PB05/SWDIO SWD-SWIO ﹡ Support SWD and UART programming. Push the Boot pin high, and then do the Uart programming.
BLE Module MBP00 Datasheet V1.0 3.Reference Design Notes: 3.3V stable, minimum ripple wave with DC-DC or LDO power supply Maximum distance between BLE model and power/high-freq layout. Avoid high- freq signal lines/power lines close or beneath the MPB00 model. Place the antenna on clearance area without any components. UAR default power is 3.3V TTL.
FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device is only authorized for use in a m obile application. At least 20 cm of separation distance between the m odule and the user's body m ust be m aintained at all tim es. The final host / m odule com bination m ay also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. The FCC Part 15 Statem ent shall be included in the user m anual of final com m ercial product if applicable.