Declaration of Conformity

LE11416AB
2
3 4
This product is a connected accessory which requires you to buy and install one of these rst:
- … with Netatmo » connected starter pack and «… with Netatmo » connected power outlets,
switches (with dimmer option).
- Connected lighting micromodules.
- radiant with Netatmo Gateway and radiant with Netatmo Switch, Dimmer or Receptacle.
- adorne with Netatmo Gateway and adorne with Netatmo Switch Dimmer or Receptacle.
1
2
3
4
Congurable
scenes
Frequency band: 2.4 - 2.4835 GHz
Power level : < 100 mW
OR OR OR
Gateway
power
module
Gateway Power
Outlet and Home/Away
wireless Switch
radiant
Gateway
adorne
Gateway
Contents:
Pocket remote control with
4 scenes
4-scene pocket remote control
0 676 95
Start conguration of the 4-scene pocket remote control
Prepare the 4-scene pocket remote control
1
2
3
4
1
2
3
4
1
2
3
4
Remove the
protective tab
press one of the buttons
on the 4-scene pocket remote control
The LED on the 4-scene pocket remote control will
ash green and then switch o.
Your 4-scene pocket remote control is ready to
use.
Press the gateway power module
conguration button or the middle of the
Home/Away wireless master switch until the
LED briey lights up green, then release. All
the LEDs on the wired products light up with a
steady green light.
To complete your installation, briey press the
gateway power module conguration button
or briey press the middle of the wireless
master switch.
All the LEDs on the products will switch o.
Press the gateway EZ button for 5
seconds and let go. The LED will turn solid
green.
Customise your scene
From the Legrand Home + Control application (Settings/Scene section)
Follow the instructions in the guide
Complete the conguration
OR
< 1 s
< 1 s
To complete your installation, briey press
the gateway EZ button.
All the LEDs on the products will switch o.
US :
Question? We’re here to help.
Phone: [phone]:00 a.m. to 8:00 p.m. EST (M-F)
Email: [e-mail]
Chat: https://wwwlegrand.us/radiant/smart-lighting.aspx
(Click on the chat icon to open a dialogue box)
Outside US:
www.legrandoc.com/064875
Legrand – Pro and Consumer Service
BP 30076 87002 Limoges CEDEX FRANCE
www.legrand.com
Reset To Factory Default:
To manually reset the device to factory defaults, press and hold the EZ Button for
10 seconds until you see the LED blink red, then release. The LED will turn o when
the reset is complete.
Replacing the battery
low
battery
lithium battery
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions
complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the following website:
www.legrandoc.com
1
2
3
4
1