Installation Instructions

ManualsBrandsLEGRAND FRANCE ISERE ST-MARCELLIN ManualsElectronicsSwitch wireless without battery

Stickers

Setup button

Do not remove

the cover plate

Wireless, batteryless

lighting control

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

Module Control Gateway power outlet and home/

away wireless master switch

Pack contents:

Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule

or socket outlet.

Wireless and batteryless lighting control

0 677 23L/73L/79L

0 770 53L - 6 000 83L

5 742 10/39/55 - 5 743 24

7 418 13L/43L/73L

LE12380AB-EN

ON/OFF

(2 short pushs OFF)

ON/OFF

(2 short pushs OFF)

Summary of content (4 pages)

PAGE 1
Wireless and batteryless lighting control 0 677 23L/73L/79L 0 770 53L - 6 000 83L 5 742 10/39/55 - 5 743 24 7 418 13L/43L/73L Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule or socket outlet. Module Control Gateway power outlet and home/ away wireless master switch Or Pack contents: ON/OFF (2 short pushs OFF) ON/OFF (2 short pushs OFF) Wireless, batteryless lighting control Stickers x2 Frequency bands: 2.4 - 2.
PAGE 2
1 Start the configuration Press the configuration button of Module Control or press the middle of the wireless master switch until its light briefly turns green, and then stop pressing. All wired products lights will turn green. Or >3s 2 Pair the wireless, batteryless switch to control the connected products (switch, micromodule, socket-outlet, latching relay). Make sure that the indicator lights on the wired products are green and not flashing. If not, go back to precedent step. 1 .
PAGE 3
A1 B C + B A1 C + A2 B C + A1 Tap 3 times the product to be controlled with the wireless, batteryless control. The light of the product to control flashes rapidly. A2 For the specific case of the latching relay, press the main button of the latching relay until the configuration indicator flashes slowly in blue, release it then tap the wired product you want to control 3 times with the wireless, batteryless control. The indicator light of the product to be controlled flashes rapidly.
PAGE 4
Put the stickers in place Before fixing the wireless control(s) with the removable stickers provided, test one on a non-visible area of the wall. H<2m H>2m You can also fix the wireless control(s) permanently to the wall with screws. www.legrandoc.com/067723L LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.