User Manual

ManualsBrandsLegacy Classic Furniture ManualsFurnitureNursery Stage 4 Bed Rails 2960-8930

Assembly Instruction 2960‐8920TODDLERBED/DAY‐BED

Page 1 of 7

 WARNING: Infants have died in toddler bed from entrapment

and strangulation. Failure to follow these warnings and the assembly

instructions could result in serious injury or death from entrapment or

strangulation.

 Read all instructions before assembling Toddler Daybed. KEEP

INSTRUCTIONS FOR FUTURE USE

 NEVER use bed with children under 15 months.

 NEVER place bed near windows where cords from blinds or drapes may

strangle child.

 DO NOT use a water mattress with this Toddler bed.

 NEVER use plastic shipping bags or other plastic film as mattress covers

because they can cause suffocation.

 Strings can cause strangulation! Do not place items with a string around a

child's neck, such as hood strings or pacifier cords. Do not suspend strings

over a Toddler bed or attach strings to toys.

 If refinishing, use a non-toxic finish specified for children's products.

 If included, always use guardrail(s).

CAUTION: ANY MATTRESS USED IN

THIS TODDLER BED MUST BE AT LEAST

27 ¼" (69 CENTIMETERS) BY 51 5/8" (131

CENTIMETERS) WITH A THICKNESS NOT

EXCEEDING 6" (15 CENTIMETERS) BUT

AT LEAST 4”(10 CENTIMETERS).

THIS BED IS FOR CHILDREN OVER 15

MONTHS OF AGE WEIGHING NO MORE

THAN 50 POUNDS (22.7KG).

09-006

Summary of content (7 pages)

PAGE 1
Assembly Instruction          2960‐8920 TODDLER BED/DAY‐BED WARNING: Infants have died in toddler bed from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation. Read all instructions before assembling Toddler Daybed. KEEP INSTRUCTIONS FOR FUTURE USE NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle child.
PAGE 2
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED IMPORTANT SAFETY INSTRUCTIONS:  Please carefully read all instructions and warnings before assembling the toddler bed.  Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.  For your safety and ease, assembly by two or more adults is recommended.  Keep instructions for future use.
PAGE 3
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED TOOLS REQUIRED: (X) Hex Allen Wrench with Ball tip -1 pc (Included) Phillips Screwdriver (not included) PRE-ASSEMBLY:  Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
PAGE 4
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED Fig (1) 3. Assemble the Long rail - Left and Right (N,O) to the Left Side Gate and Right Side Gate with 4 bolts (F), using the Hex Allen Wrench.(see Fig 2).
PAGE 5
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED 4. Assemble the Guard rail (Q) into Conversion Rail (P) with 2 Toddler bed bracket (U) with 4 Bolts (T) and 4 Cap nuts (V), using the Hex Allen Wrench (X) (see Fig 3). Fig (3) 5. Assemble the Guard rail and Conversion rail into the Long rail-Left and Right (N,O) with Bolts (R) and Barrel nut (W), using Hex Allen Wrench. Adjust the Barrel nut (W) to fit with the Bolt (R) on the hole of the conversion rail once assembled (see Fig 4). Fig (4) 6.
PAGE 6
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED NOTE: The guardrail can be assembled with opening on either side. 7. The guardrail can be removed for older Toddlers. This step converts the crib to a Toddler Daybed.
PAGE 7
Assembly Instruction 2960‐8920 TODDLER BED/DAY‐BED CARE AND USE INSTRUCTIONS  Dust often using a clean, soft, dry lint-free cloth.  Blot spills immediately, and wipe with a clean, damp, cloth.  We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.  If the crib is to be stored, store in cool dry place and carefully package all original hardware to protect from loss or damage.  Check fasteners periodically for tightness. DO NOT over tighten.