Leedarson Bluetooth LED Bulb Quick User Guide Draft Ver. V V1.0 Description Time 2019.2 1 THANK YOU We appreciate the trust and confidence you have placed in LEEDARSON through the purchase of Bluetooth Light Bulb. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Product Introduction 1.1 Basic Information CONTROL YOUR LIGHTS FROM ANYWHERE in the world from the palm of your hand. The Retrofit produces beautiful high quality light that you can dim or tune, and control from your smartphone or tablet. Easy to setup, bulbs fit into your standard household sockets - no need for installation by an electrician. A wireless network or remote controller is required to operate bulbs.
1.3 Leave your fixture on If your switch or fixture is OFF,or is turned OFF, then control and communication from the App, or wireless switch, to the LED Bulb is lost. Quick Start Guide The following are the general user guide: Step 1: Screw the bulb into a standard socket. Step 2: Turn on the bulb with your wall switch to apply power to the bulb. If you’re not using a wall switch, then use your alternate method to apply power to the bulb. Step 3: Get the LEEDARSON App for Android or iOS.
1.4 Factory Reset Procedure Physically switch the bulb on and off six (6) times for intervals of 0.5-2seconds. After the 6thtime, the bulb will flash twice indicating that it’s successfully reset. Warning FCC Supplier’s Declaration of Conformity 8Zy-BR650ST-A4R This device complies with part 15 of the FCC Rules.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
1) Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing the bulb from the fitting 2) Warning: Risk of Electric Shock. Do not attempt to disassemble bulb. 3) Not suitable for use with standard wall dimmers 4) Suitable for use in operation environment between -4℉ and 104℉(-20℃ and 40℃) 5) Not for use in emergency lighting. 6) The bulb is not suitable for totally enclosed fixtures.