Safety Information

ManualsBrandsLEEDARSON LIGHTING ManualsElectronicsDoor/Window sensor

BLE Door Window Sensor

Contents:

1. In the box………………………………………………………………………………………………………………………………………..2

2. app set up……………………………………………………………………………………………………………………………………….2

3. Product introduction……………………………………………………………………………………………………………………….3

4. Product installation………………………………………………………………………………………………………………………… 3

5. Safety information……………………………………………………………………………………………………………………………4

6. Maintenance.. ........................................................................................................................................ 6

7. FCC compliance notice……………………………………………………………………………………………………………………..7

We build your success in IoT.

Summary of content (7 pages)

PAGE 1
We build your success in IoT. BLE Door Window Sensor Contents: 1. In the box………………………………………………………………………………………………………………………………………..2 2. app set up……………………………………………………………………………………………………………………………………….2 3. Product introduction……………………………………………………………………………………………………………………….3 4. Product installation………………………………………………………………………………………………………………………… 3 5. Safety information……………………………………………………………………………………………………………………………4 6. Maintenance.. ..................................................................................
PAGE 2
BLE Door window sensor Quick Start Guide 1. In the box Door/Window sensor Screws 2. app set up Remove the plastic sheet from battery cabinet. It’s power on now. Reset sensor Sensor in pairing mode Sensor is connected to gateway or mobile phone.
PAGE 3
. Product Introduction The Leedarson door window sensor is designed for use with scenes in home automation and security systems, the door window sensor lets you know when door or windows is opened and can trigger different actions in response to that open action (or close action).
PAGE 4
5. Safety Information Battery Safety Information: • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep away from babies and small children at all times. • If battery is swallowed or placed inside any part of the body, immediately seek medical help. • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used battery promptly.
PAGE 5
IMPORTANT: Do not expose to rain. Install the product at least 3 ft. from the door for optimum performance. This alarm contains small parts and is not suitable for children. Periodically check the condition of the batteries. Disposal and Recycling Information: Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
PAGE 6
. Maintenance ① How to reset a door/window sensor? Keep pressing the reset key about 3 seconds, then the LED indicator will start blinking quickly. Once release the key, the sensor will reset to factory setting and the LED indicator blinks once per second to search a new enabled network. ② How to join a door/window sensor? After the sensor is reset to the factory setting, the signal light blinks once per second and sensor starts searching an enabled network.
PAGE 7
Open battery cover, replace battery if battery is low power. 7. FCC compliance notice FCC ID:2AB2Q8ASSBEH0 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.