6Vy-A806ST-Q1G Leedarson LED Bulb RGBW Quick User Guide Draft Ver. Fu V1.0 Leedarson Lighting Description Time 2016.1.
1 Product Introduction 1.1 Basic Information CONTROL YOUR LIGHTS FROM ANYWHERE in the world from the palm of your hand. The RGBW Retrofit produces beautiful high quality light that you can tune, dim, and control from your smartphone or tablet. Easy to setup, bulbs fit into your standard household sockets - no need for installation by an electrician. A wireless network is required to operate bulbs. SET LIGHT SCENES: Create rich indirect light scenes in your home in thousands of colors and 2700-6500K white.
1.3 Devices Inclusion and Exclusion If your switch or fixture is OFF,or is turned OFF, then control and communication from the App, or wireless switch, to the LED Bulb is lost. Inclusion Procedure The following are the general procedures for the Z-Wave bulb to be “included/excluded “into the network: 1. Screw the RGBW bulb into a standard E27 socket. 2. Turn on the bulb with your wall switch to apply power to the bulb.
1.5 Behaviors of the bulb This bulb has some behaviors to indicate users the status of the bulb. 1.6 Factory Reset mode The bulb will flash twice when it is powered on in reset mode or factory mode. 1.7 Add for inclusion The A19 bulb will flash once when it has been included into the network. 1.8 Remove for exclusion The A19 bulb will flash once and then dim to 5% when it has been excluded outside the network.
process. 1.9 Technical Parameter Protocol Frequency Communication Distance Modulation Mode Power(W) Voltage(V) CCT(K) CRI Beam Angle Dimensions(mm) Z-Wave 908.42MHz 40m(LOS) FSK(BFSK/GFSK) 9.5 120 2700-6500 80 240 120*60 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
