We build your success in IoT.
Meet Your LEEDARSON Contact Sensor The Contact Sensor lets you know when door or windows is opened and can trigger different actions in response to that open action (or close action). Capabilities: The LEEDARSON Contact Sensor is a universal ZigBee Contact Sensor. The LEEDARSON Contact Sensor detects status of door or windows. The LEEDARSON Contact Sensor is powered by CR2032 battery with 3 years battery life. The LEEDARSON Contact Sensor is designed to be mounted on the door or windows.
Specification Power Supply: Battery Operational Voltage: 3V Battery Type: CR2032 Battery Life: 3 years Radio Protocol: ZigBee Radio Frequency: 2.4GHz Range: 100ft LOS Operational Temperature: ‐10Ԩ ~ + 50Ԩ Standards Compliance: FCC, CE 45.3(L)*31.1(W)*19.1(H) for Main Body 45.3(L)*15.2(W)*18.
How to connect a Contact Sensor Use a pin to press the button in the main body of the sensor to include the Contact Sensor into the ZigBee network. Contact Sensor’s Inclusion Procedure: 1. Make sure the sensor is powered. 2. Press and hold the button for 3 second. This will cause a LED indicator to flash once per second. 3. Tap “Add device” in the LEEDARSON LDS App. The LDS App will search for the device. 4. The LED indicator will turn off to confirm a successful inclusion.
How to reset a Contact Sensor Reset procedure deletes memory, including all information on the ZigBee network and the hub. Contact Sensor’s Reset Procedure: 1. Make sure the sensor is powered. 2. Press and hold the button for 3 seconds. 3. Release the button. 4. LED indicator flashes once per second to confirm a successful reset. Caution: This device complies with Part 15 of the FCC Rules.